Modifying ability of Ql-free coal-tar pitch to develop optical anisotropy in co-carbonizations

Carbonization properties of a Ql-free coal-tar pitch (CTP-ASM) prepared by selective precipitation were studied to evaluate it as a source for needle-coke. Its modifying ability for production of needlecoke in co-carbonizations with principal carbonizing substances which gave cokes of mozaic texture in single carbonizations was estimated by changing mixing ratios. The shape and size of the anisotropic optical texture in the co-carbonized coke were measured by point counting. CTP-ASM and Ashland A240, of eight additives, had the highest modifying ability in the co-carbonizations with Khafji vacuum residue. Both contained ca. 6% benzene-insolubles (Bl), and had f_a values of ≈0.9. Other additives of either lower or higher Bl or f_a showed less modifying ability. The modifying susceptibility of principal carbonizing substances varies with their structure and properties. Based on a systematic investigation of co-carbonizations the compatibility between a principal carbonizing substance and an additive is discussed from a viewpoint of their structural parameters.     

Rh/γ-Al2O3 Catalytic Layer Integrated with Sol–Gel Synthesized Microporous Silica Membrane for Compact Membrane Reactor Applications

An efficient and compact catalytic membrane reactor for reforming of CH₄ was developed by integrating a hydrogen perm-selective silica membrane with an Rh/-Al₂O₃ catalyst layer. The catalytic layer was sandwiched between the outer surface of the -Al₂O₃ support tube and the silica membrane with an aim of improving the heat and mass transfer rates through the system and to simplify the reactor geometry. The system showed improved efficiency for reforming of CH₄ at comparatively lower operating temperatures and steam to C molar ratios than the conventional fixed-bed steam reforming systems. Under optimized conditions, a nearly 25-30% improvement from the equilibrium conversion level was achieved as a result of abstraction of hydrogen from the product stream by the silica membrane integrated with the catalyst layer. The performance of the system was evaluated as a function of various process parameters. Because of the compactness and efficiency, the present system emerges as a promising alternative to the conventional membrane reactors, which possess separate catalytic and membrane units.     

Low-Temperature Processing and Mechanical Properties of Zirconia and Zirconia–Alumina Nanoceramics

The 1.5- to 3-mol%-Y₂O₃-stabilized tetragonal ZrO₂ (Y-TZP) and Al₂O₃/Y-TZP nanocomposite ceramics with 1 to 5 wt% of alumina were produced by a colloidal technique and low-temperature sintering. The influence of the ceramic processing conditions, resulting density, microstructure, and the alumina content on the hardness and toughness were determined. The densification of the zirconia (Y-TZP) ceramic at low temperatures was possible only when a highly uniform packing of the nanoaggregates was achieved in the green compacts. The bulk nanostructured 3-mol%-yttria-stabilized zirconia ceramic with an average grain size of 112 nm was shown to reach a hardness of 12.2 GPa and a fracture toughness of 9.3 MPa·m^1/2. The addition of alumina allowed the sintering process to be intensified. A nanograined bulk alumina/zirconia composite ceramic with an average grain size of 94 nm was obtained, and the hardness increased to 16.2 GPa. Nanograined tetragonal zirconia ceramics with a reduced yttria-stabilizer content were shown to reach fracture toughnesses between 12.6–14.8 MPa·m^1/2 (2Y-TZP) and 11.9–13.9 MPa·m^1/2 (1.5Y-TZP).     

High-Temperature Active Oxidation of Chemically Vapor-Deposited Silicon Carbide in CO─CO2 Atmosphere

Active oxidation behavior of CVD-SiC in CO─CO₂ atmospheres was investigated using a thermogravimetric technique in the temperature range between 1823 and 1923 K. The gas pressure ratio, P _CO2/ P _CO, was controlled between 10⁻⁴ and 10⁻¹ at 0.1 MPa. Active oxidation rates (mass loss rates) showed maxima at a certain value of P _CO2/ P _CO, ( P _CO2/ P _CO )^*, In a P _CO2/ P _CO region lower than the ( P _CO2/ P _CO)^* a carbon layer was formed on the SiC surface. In a P _CO2/ P _CO region higher than the ( P _CO2/ P _CO)^*, silica particles or a porous silica layer was observed on the SiC surface.     

Preparation of Cu(In,Ga)(S,Se)2 thin films by sequential evaporation and annealing in sulfur atmosphere

Cu(In,Ga)(S,Se)₂ thin films with high Ga/III ratio (around 0.8) were prepared by sequential evaporation from CuGaSe₂, CuInSe₂, In₂Se₃ and Ga₂Se₃ compounds and then annealing in H₂S gas atmosphere. The annealing temperature was varied from 400 to 500 °C. These samples were characterized by means of XRF, EPMA, XRD and SEM. The S/(S+Se) mole ratio in the thin films increased with increase in the annealing temperature, keeping the Cu, In and Ga contents nearly constant. The open circuit voltage increased and the short circuit current density decreased with increase in the annealing temperature. The best solar cell using Cu(In,Ga)(S,Se)₂ thin film with Ga/(In+Ga)=0.79 and S/(S+Se)=0.11 annealed at 400 °C demonstrated V_oc=535 mV, I_sc=13.3 mA/cm², FF=0.61 and efficiency=4.34% without AR-coating.     

Synthesis and electrochemistry of cubic rocksalt Li–Ni–Ti–O compounds in the phase diagram of LiNiO2–LiTiO2–Li[Li1/3Ti2/3]O2

On the basis of extreme similarity between the triangle phase diagrams of LiNiO₂–LiTiO₂–Li[Li_1/3Ti_2/3]O₂ and LiNiO₂–LiMnO₂–Li[Li_1/3Mn_2/3]O₂, new Li–Ni–Ti–O series with a nominal composition of Li_1+z/3Ni_1/2−z/2Ti_1/2+z/6O₂ (0 ≤ z ≤ 0.5) was designed and attempted to prepare via a spray-drying method. XRD identified that new Li–Ni–Ti–O compounds had cubic rocksalt structure, in which Li, Ni and Ti were evenly distributed on the octahedral sites in cubic closely packed lattice of oxygen ions. They can be considered as the solid solution between cubic LiNi_1/2Ti_1/2O₂ and Li[Li_1/3Ti_2/3]O₂ (high temperature form). Charge–discharge tests showed that Li–Ni–Ti–O compounds with appropriate compositions could display a considerable capacity (more than 80 mAh g⁻¹ for 0.2 ≤ z ≤ 0.27) at room temperature in the voltage range of 4.5–2.5 V and good electrochemical properties within respect to capacity (more than 150 mAh g⁻¹ for 0 ≤ z ≤ 0.27), cycleability and rate capability at an elevated temperature of 50 °C. These suggest that the disordered cubic structure in some cases may function as a good host structure for intercalation/deintercalation of Li⁺. A preliminary electrochemical comparison between Li_1+z/3Ni_1/2−z/2Ti_1/2+z/6O₂ (0 ≤ z ≤ 0.5) and Li_6/5Ni_2/5Ti_2/5O₂ indicated that charge–discharge mechanism based on Ni redox at the voltage of >3.0 V behaved somewhat differently, that is, Ni could be reduced to +2 in Li_1+z/3Ni_1/2−z/2Ti_1/2+z/6O₂ while +3 in Li_6/5Ni_2/5Ti_2/5O₂. Reduction of Ti⁴⁺ at a plateau of around 2.3 V could be clearly detected in Li_1+z/3Ni_1/2−z/2Ti_1/2+z/6O₂ with 0.27 ≤ z ≤ 0.5 at 50 °C after a deep charge associated with charge compensation from oxygen ion during initial cycle.     

Preparation of regioisomers of structured TAG consisting of one mole of CLA and two moles of caprylic acid

TAG (MLM) with medium-chain FA (MCFA) at the 1,3-positions and long-chain FA (LCFA) at the 2-position, and TAG (LMM) with LCFA at the 1(3)-position and MCFA at 2,3(1)-positions are a pair of TAG regioisomers. Large-scale preparation of the two TAG regioisomers was attempted. A commercially available FFA mixture (FFA-CLA) containing 9-cis, 11-trans (9c, 11t)- and 10t,12c-CLA was selected as LCFA, and caprylic acid (C₈FA) was selected as MCFA. The MLM isomer was synthesized by acidolysis of acyglycerols (AG) containing two CLA isomers with C₈FA: A mixture of AG-CLA/C₈ FA (1∶10, mol/mol) and 4 wt% immobilized Rhizomucor miehei lipase was agitated at 30°C for 72 h. The ratio of MLM to total AG was 51.1 wt%. Meanwhile, LMM isomer was synthesized by acidolysis of tricaprylin with FFA-CLA: A mixture of tricaprylin/FFA-CLA (1∶2, mol/mol) and 4 wt% immobilized R. miehei lipase was agitated at 30°C for 24 h. The ratio of LMM to total AG was 51.8 wt%. MLM and LMM were purified from 1,968 and 813 g reaction mixtures by stepwise short-path distillation, respectively. Consequently, MLM was purified to 92.3% with 49.1% recovery, and LMM was purified to 93.2% with 52.3% recovery. Regiospecific analyses of MLM and LMM indicated that the 2-positions of MLM and LMM were 95.1 mol% LCFA and 98.3 mol% C₈ FA, respectively. The results showed that a process comprising lipase reaction and short-path distillation is effective for large-scale preparation of high-purity regiospecific TAG isomers.     

Effect of steric hindrance on hydrogen‐bonding interaction between polyesters and natural polyphenol catechin

The phase behaviors for the blends of poly(3‐hydroxypropionate) (PHP), poly(L ‐lactide) (PLLA), poly(D ‐lactide) (PDLA), and poly(D,L ‐lactide) (PDLLA) with catechin were investigated by differential scanning calorimetry. In PLLA/catechin, PDLA/catechin, and PDLLA/catechin blends, two glass transitions were detected when the catechin content was ≥40 wt %, whereas in PHP/catechin blends only one glass transition was observed over the whole range of blend compositions. The former and the latter results should reflect the inhomogeneous and the homogeneous nature of the blends, respectively, in the amorphous phase. These different phase behaviors should arise from the differences in the chemical structures between PHP and PLLA/PDLA/PDLLA, which dominates the strength and the number of intermolecular hydrogen‐bonding interactions between the ester carbonyl groups of polyesters and the phenol groups of catechin. As detected by FTIR spectroscopy, in comparison with PHP, the steric hindrance of side‐chain methyl groups of PLLA, PDLA, and PDLLA might restrain the formation of hydrogen bonds between their ester carbonyl groups and the phenol hydroxyl groups of catechin, even weakening the strength of such hydrogen bonds. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3565–3573, 2004     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

Imaging of optical disc using reflection-mode scattering-type scanning near-field optical microscopy

A phase-change optical disc was observed using a reflection-mode scattering-type scanning near-field optical microscope (RS-SNOM). In an a.c.-mode SNOM image, the 1.2 microm x 0.6 microm recording marks were successfully observed although the data were recorded on the groove. In contrast, no recording marks could be resolved in a d.c.-mode SNOM image. These results are in good agreement with those from a numerical simulation using the finite difference time domain method. The resolution was better than 100 nm with a.c.-mode SNOM operation and the results indicate that recording marks in phase-change optical media can be directly observed with the RS-SNOM.