Enhanced capacitance of composite anodic ZrO₂ films comprising high permittivity oxide nanocrystals and highly resistive amorphous oxide matrix

Anodic oxide films with nanocrystalline tetragonal ZrO(2) precipitated in an amorphous oxide matrix were formed on Zr-Si and Zr-Al alloys and had significantly enhanced capacitance in comparison with those formed on zirconium metal. The capacitance enhancement was associated with the formation of a high-temperature stable tetragonal ZrO(2) phase with high relative permittivity as well as increased ionic resistivity, which reduces the thickness of anodic oxide films at a certain formation voltage. However, there is a general empirical trend that single-phase materials with higher permittivity have lower ionic resistivity. This study presents a novel material design based on a nanocrystalline-amorphous composite anodic oxide film for capacitor applications.     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

Roles of α-Synuclein and Disease-Associated Factors in Drosophila Models of Parkinson’s Disease

α-Synuclein (αSyn) plays a major role in the pathogenesis of Parkinson’s disease (PD), which is the second most common neurodegenerative disease after Alzheimer’s disease. The accumulation of αSyn is a pathological hallmark of PD, and mutations in the SNCA gene encoding αSyn cause familial forms of PD. Moreover, the ectopic expression of αSyn has been demonstrated to mimic several key aspects of PD in experimental model systems. Among the various model systems, Drosophila melanogaster has several advantages for modeling human neurodegenerative diseases. Drosophila has a well-defined nervous system, and numerous tools have been established for its genetic analyses. The rapid generation cycle and short lifespan of Drosophila renders them suitable for high-throughput analyses. PD model flies expressing αSyn have contributed to our understanding of the roles of various disease-associated factors, including genetic and nongenetic factors, in the pathogenesis of PD. In this review, we summarize the molecular pathomechanisms revealed to date using αSyn-expressing Drosophila models of PD, and discuss the possibilities of using these models to demonstrate the biological significance of disease-associated factors.     

Direct Reprogramming and Induction of Human Dermal Fibroblasts to Differentiate into iPS-Derived Nucleus Pulposus-like Cells in 3D Culture

Intervertebral disc (IVD) diseases are common spinal disorders that cause neck or back pain in the presence or absence of an underlying neurological disorder. IVD diseases develop on the basis of degeneration, and there are no established treatments for degeneration. IVD diseases may therefore represent a candidate for the application of regenerative medicine, potentially employing normal human dermal fibroblasts (NHDFs) induced to differentiate into nucleus pulposus (NP) cells. Here, we used a three-dimensional culture system to demonstrate that ectopic expression of MYC, KLF4, NOTO, SOX5, SOX6, and SOX9 in NHDFs generated NP-like cells, detected using Safranin-O staining. Quantitative PCR, microarray analysis, and fluorescence-activated cell sorting revealed that the induced NP cells exhibited a fully differentiated phenotype. These findings may significantly contribute to the development of effective strategies for treating IVD diseases.     

Graft copolymerization onto cellulose by ceric ion initiator system: Effects of kind of acid and irradiation with ultraviolet light

The effects of kind of acid and irradiation of ultraviolet light on the graft copolymerization of methyl methacrylate onto cellulose with adsorbed ceric ion were investigated. Irrespective of ultraviolet light irradiation, the amount of reduced ceric ion in the reaction systems was increased in the order HCl > HClO₄ > HNO₃ > H₂SO₄, and the number of grafts formed was increased in the order HClO₄ > HNO₃ > HCl > H₂SO₄. Thus, it was definitely observed that the graft copolymerization is affected by the kind of acid. Ultraviolet light remarkably accelerated the reduction of ceric ion adsorbed on cellulose in the various acid mediums, but decreased the efficiency of graft formation. The most favorable results for the formation of grafts were obtained in the system in which HClO₄ and ultraviolet irradiation was employed. A combination of H₂SO₄ and ultraviolet irradiation resulted in the lowest per cent grafting and average molecular weight of grafts. It was found that H₂SO₄ characteristically dissolves out ceric ion adsorbed into an aqueous solution and accelerates the formation of homopolymer.     

Graft copolymerization to cellulose. Effect of sodium thiosulfate on hydrogen peroxide initiator system

The effect of sodium thiosulfate on the graft copolymerization of methyl methacrylate to cellulose in the hydrogen peroxide initiator system was investigated. The addition of sodium thiosulfate in general was effective for decreasing the per cent grafting and the average molecular weight of grafts and increasing the formation of homopolymer, and the effects became pronounced with increasing hydrogen peroxide concentration. Moreover, the addition of sodium thiosulfate slightly suppressed the formation of grafts at a hydrogen peroxide concentration of 3 mmole/l., but greatly promoted it at 20 mmole/l. Traces of metallic ions present in cellulose could not be eliminated sufficiently by treatment with 3N hydrochloric acid. Such ions were found to interact with hydrogen peroxide and thus participate directly in the initiation and termination of the polymerization reaction. EDTA, the chelating agent, was highly effective for suppressing such participation of metallic ions. In the hydrogen peroxide initiator system applied to the EDTA-treated samples, sodium thiosulfate caused an effective initiation of graft formation.     

Cellulose peroxides derived from carbonylated cellulose and hydrogen peroxide

Cellulose peroxides derived from hydrogen peroxide and cellulose derivative into which a ketone group is introduced by reaction with methyl vinyl ketone were investigated. The amount of peroxide formed on the cellulose substrate increased linearly with increasing carbonyl content of the sample, and sulfuric acid activated the formation of peroxide. The cellulose peroxide was gradually decomposed at 60°C in aqueous medium, and the decomposition was accelerated by addition of ferrous salt or irradiation with light of λ > 300nm. Grafting was initiated by adding methyl methacrylate to the thermal decomposition system under nitrogen. The formation, stability, thermal decomposition, and structure of the cellulose peroxide were discussed in comparison with one derived from aldehyde cellulose and hydrogen peroxide.     

Analysis of proton exchange membrane fuel cell catalyst layers for reduction of platinum loading at Nissan

The biggest issue that must be addressed in promoting widespread use of fuel cell vehicles (FCVs) is to reduce the cost of the fuel cell system. Especially, it is of vital importance to reduce platinum (Pt) loading of catalyst layers (CLs) in the membrane electrode assembly (MEA) of a proton exchange membrane fuel cell (PEMFC). In order to lower the Pt loading of the MEA, mass transport of reactants related to the performance in high current density should be enhanced significantly as well as kinetics of the catalyst, which can result in the better Pt utilization and effectiveness. In this study, we summarized our analytical approach and methods for reduction of Pt loading in CLs. Microstructure, mass transport properties of the reactants, and their relation in CLs were elucidated by applying experimental analyses and computational methods. A simple CL model for I–V performance prediction was then established, where experimentally elucidated parameters of the microstructure and the properties in CLs were taken into account. Finally, we revealed the impact of lowering the Pt loading on the transport properties, polarization, and the I–V performance.     

Effects of aging and moisture on the dynamic viscoelastic properties of oriental lacquer (urushi) film

The effects of aging and moisture on the dynamic viscoelastic properties of three oriental lacquer films were investigated. With aging over 1000 days at room temperature, the glass‐transition temperature of the lacquer films (T_α) shifted to higher temperatures, the maximum loss tangent (tanδ_α) decreased, and the storage modulus at 20°C (E) increased. These changes were analogous irrespective of lacquers. With increasing moisture content, E decreased and tanδ increased at room temperature. Although the equilibrium moisture content of the virgin lacquer (sap) film was higher than that of the clear lacquer film, its E and tanδ were more stable with an increase of moisture content. It was speculated that the polysaccharides aggregated in the sap film did not effectively contribute to the mechanical properties of the film, while their hygroscopicity resulted in higher moisture content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2288–2294, 2002     

EFFECT OF FLUIDIZING PARTICLE ON DRYING CHARACTERISTICS OF POROUS MATERIAL IN FLUIDIZED BED

The drying characteristics of porous material in fluidized bed were examined theoretically and experimentally. The brick ball was used as the sample and immersed in the fluidized bed. The glass beads were used as the fluidizing particles and the particle diameters were changed. When the pore diameter of sample was relatively large, the fluidizing particles were adhered on the sample surface. In the theoretical analysis, the heat and mass transfers in adhered particle layer were considered. The fluidizing particles were adhered on the sample surface during the earlier period of drying. The sample temperature largely decreased when the mass of adhered particle decreased. The calculated results are in good agreement with experimental data. The diameter of fluidizing particle had a small effect on the drying time. The excess increments in drying gas temperature hardly contributed to shortening the drying time.