多线程技术在LIA中两路束流测量的实现

强流脉冲电子束作为一种高亮度的光源,具有广阔的应用前景,而双轴束流测量的控制对于研究产生电子束的加速器技术具有重要意义;利用多线程技术在CVI环境下的实现方法,研究了双路束流参数特点、双路束流测量的时序同步控制方法,在此基础上采用线程池多线程技术实现基于TCP/IP的加速器束流测量的数据采集软件;结果表明采用多线程技术可以很好地实现多任务的同时工作,有助于提高束测量的响应速度和测量的执行效率。     

基于ArcIMS的南邮校园WebGIS平台的设计与实现

校园WebGIS平台是"数字校园"的一个重要组成部分,是推进校园信息化建设的一项重要举措.以ArcIMS为技术手段,基于B/S体系结构,设计并实现了南京邮电大学校园WebGIS平台.对ArcIMS的体系结构、WebGIS平台的设计方案、技术流程及其功能实现做了详细介绍.结果表明,利用ArcIMS可以高效地构建功能强大的网络地理信息系统平台,提供各种空间信息服务,并且具有良好的可扩展性.     

过敏原肌质钙结合蛋白在毕赤酵母中的表达、优化及免疫反应性研究

目的 探究天然肌质钙结合蛋白(sarcoplasmic calcium binding protein, SCP)的可替代物,为蟹类过敏原的检测提供基础材料,本研究首次利用毕赤酵母(Pichia pastoris, P. pastoris)高效表达表达三疣梭子蟹(Portunus trituberculatus)重要过敏原SCP,并检验其免疫反应性。方法 根据毕赤酵母的密码子偏好性优化SCP基因并构建重组质粒。将其热激转化至P. pastoris GS115菌株后经遗传霉素(Geneticin, G418)筛选获得阳性高拷贝子。最后通过甲醇诱导表达重组SCP并结合免疫印记(Western blotting, WB)和间接酶联免疫吸附实验(enzyme-linked immunosorbent assay, ELISA)验证其免疫反应性。结果 SCP在P. pastoris GS115中实现了可溶性高效表达,其表观分子量约为28 kDa。在摇瓶水平下,最佳诱导条件为pH为6.0、每24 h添加1.0%(v/v)甲醇,于28℃发酵144 h,在此条件下,纯度为91.6%的SCP产量可达15 mg/L。WB和间接ELISA结果表明,重组SCP具有IgG结合能力。结论 毕赤酵母表达系统可以得到纯度较高且免疫反应性良好的重组SCP。本研究为SCP的理化研究及产业化应用奠定了基础,并有望促进特异性甲壳类过敏原检测的发展。     

低温等离子体处理模式对冷藏南美白对虾中假单胞菌的抑菌效果及机理研究

摘 要：目的 探究低温等离子体(cold plasma, CP)处理模式对冷藏南美白对虾中常见荧光假单胞菌(Pseudomonas fluorescens)的抑菌效果及其作用机制。方法 通过CP直接处理和循环处理P. fluorescens,研究了两种处理模式下臭氧含量动态变化对P. fluorescens的生长曲线、细胞活力,生物膜形成、细胞壁、细胞膜完整性和南美白对虾菌落总数及假单胞菌数等指标的影响。结果 两种处理模式在CP处理3 min或3 cycles后,包装内臭氧含量达到最高值,分别为(850±10) mg/m3和(874±20) mg/m3。CP循环处理模式使得臭氧含量随处理循环数递增,因此获得更长的臭氧存在时间从而具有更大的抑菌能力。P. fluorescens生长曲线表明CP处理使得菌体延迟期变长且对数生长期推迟。此外,CP处理后的P. fluorescens细胞活力显著下降(P<0.05),CP-1 min,CP-3 min和CP-3 cycles组的细胞活力分别为33.03%、5.90%和4.82%。同时相比CP-3 min组,CP-3 cycles组的P. fluorescens生物膜OD值下降27.61%。碱性磷酸酶(alkaline phosphatase, AKP)活性和核酸蛋白泄漏量结果表明,细胞壁和细胞膜完整性受损可能是P. fluorescens失活的直接原因。对虾保鲜测试结果证实,贮藏第6 d,CP-3 cycles组虾体中的菌落总数和假单胞菌数相比CP-3 min组分别降低了58.02%和79.54%。结论 CP循环处理模式通过延长对臭氧与对虾的暴露时间,提高了对P. fluorescens的灭活效果,同时还具有更优越的保鲜能力。本研究为开发基于CP技术的新型保鲜技术应用提供了理论参考。 关键词：低温等离子体;荧光假单胞菌;抑菌机制;保鲜     

Single-Atom Metal Sites Anchored Hydrogen-Bonded Organic Frameworks for Superior “Two-In-One” Photocatalytic Reaction

Photoredox catalysis is a green solution for organics transformation and CO₂ conversion into valuable fuels, meeting the challenges of sustainable energy and environmental concerns. However, the regulation of single-atomic active sites in organic framework not only influences the photoredox performance, but also limits the understanding of the relationship for photocatalytic selective organic conversion with CO₂ valorization into one reaction system. As a prototype, different single-atomic metal (M) sites (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) in hydrogen-bonded organic frameworks (M-HOF) backbone with bridging structure of metal-nitrogen are constructed by a typical “two-in-one” strategy for superior photocatalytic C N coupling reactions integrated with CO₂ valorization. Remarkably, Zn-HOF achieves 100% conversion of benzylamine oxidative coupling reactions, 91% selectivity of N-benzylidenebenzylamine and CO₂ conversion in one photoredox cycle. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to synergic effect of atomically dispersed metal sites and HOF host, decreasing the reaction energy barriers, enhancing CO₂ adsorption and forming benzylcarbamic acid intermediate to promote the redox recycle. This work not only affords the rational design strategy of single-atom active sites in functional HOF, but also facilitates the fundamental insights upon the mechanism of versatile photoredox coupling reaction systems.     

Amine Coordinated Electron-Rich Palladium Nanoparticles for Electrochemical Hydrogenation of Benzaldehyde

Electrocatalytic hydrogenation (ECH) is a burgeoning strategy for the sustainable utilization of hydrogen. However, how to effectively suppress the competitive hydrogen evolution reaction (HER) is a big challenge to ECH catalysis. In this study, amine (NH₂ R)-coordinated Pd nanoparticles loaded on carbon felt (Pd@CF) as a catalyst is successfully synthesized by a one-step solvothermal reduction method using oleylamine as the reducing agent. An exceptional ECH reactivity on benzaldehyde is achieved on the optimal Pd@CF catalyst in terms of a high conversion (89.7%) and selectivity toward benzyl alcohol (89.8%) at −0.4 V in 60 min. Notably, the Faradaic efficiency for producing benzyl alcohol is up to 90.2%, much higher than that catalyzed by Pd@CF-without N-group (41.1%) and thecommercial Pd/C (20.9%). The excellent ECH performance of Pd@CF can be attributed to the enriched electrons on Pd surface resulted from the introduction of NH₂ R groups, which strengthens both the adsorption of benzaldehyde and the adsorbed hydrogen (H_ads) on Pd, preventing the combination of H_ads to form H₂, that is, inhibiting the HER. This study gives a new insight into design principles of highly efficient electrocatalysts for the hydrogenation of unsaturated aldehydes molecules.     

Ultrafast Switchable Passive Radiative Cooling Smart Windows with Synergistic Optical Modulation

Switchable passive radiative cooling (PRC) smart windows can modulate sunlight transmission and spontaneously emit heat to outer space through atmospheric transparent window, presenting great potential in building energy conservation. However, realizing stable and on-demand control of the cooling efficiency for PRC materials is still challenging. Herein, an electro-controlled polymer-dispersed liquid crystal (PDLC) smart window showing PRC property is designed and prepared by adding mid-infrared emitting reactive monomers into the conventional PDLC matrix. It is found that not only the electro-optical properties but also the PRC efficiency of PRC PDLC film are tunable by regulating the content of the mid-infrared emitting components, film thickness, and micromorphology. This advanced PRC PDLC material achieves a near/sub-ambient temperature when the solar irradiance is below 400 W m⁻² and can dynamically manage daytime cooling efficiency. Importantly, its PRC efficiency is capable of being tuned in an on-demand and ultrafast millisecond-scale way, whose controllable transparency enables multistage heat regulation. This study is hoped to provide new inspiration in the preparation of advanced optical devices and energy-efficient equipment.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Study on Recognition Method of Similar Weather Scenes in Terminal Area

Weather is a key factor affecting the control of air traffic. Accurate recognition and classification of similar weather scenes in the terminal area is helpful for rapid decision-making in air traffic flow management. Current researches mostly use traditional machine learning methods to extract features of weather scenes, and clustering algorithms to divide similar scenes. Inspired by the excellent performance of deep learning in image recognition, this paper proposes a terminal area similar weather scene classification method based on improved deep convolution embedded clustering (IDCEC), which uses the combination of the encoding layer and the decoding layer to reduce the dimensionality of the weather image, retaining useful information to the greatest extent, and then uses the combination of the pre-trained encoding layer and the clustering layer to train the clustering model of the similar scenes in the terminal area. Finally, terminal area of Guangzhou Airport is selected as the research object, the method proposed in this article is used to classify historical weather data in similar scenes, and the performance is compared with other state-of-the-art methods. The experimental results show that the proposed IDCEC method can identify similar scenes more accurately based on the spatial distribution characteristics and severity of weather; at the same time, compared with the actual flight volume in the Guangzhou terminal area, IDCEC's recognition results of similar weather scenes are consistent with the recognition of experts in the field.     

Design techniques for voltage-to-time converters with nonlinearity emphasis

This paper provides an in-depth treatment of voltage-to-time converters (VTCs) for time-based signal processing with a nonlinearity emphasis. The need for VTCs in deployment of time-based techniques for high-speed or high-resolution analog-to-digital converters is investigated. It is followed with the classification of VTCs. A detailed treatment of the principle, topology, operation, and design consideration of variable-slope (VS) and constant-slope (CS) VTCs is provided. The nonlinearity of VS-VTCs and that of CS-VTCs are analyzed in detail analytically. It is shown that VS-VTCs is inherently nonlinear while CS-VTCs is intrinsically linear. Factors contributing to the nonlinearity of these VTCs are investigated. VS-VTCs and CS-VTCs studied are designed in TSMC 130 nm 1.2 V CMOS and analyzed using Spectre from Cadence Design Systems with BSIM3.3 device models. A good agreement between simulation and analytical results is obtained. The average gain of the VS-VTC is 4.4 times that of the CS-VTC. The 2nd and 3rd harmonics of the CS-VTC are significantly smaller as compared with those of the VS-VTC at the price of more power consumption.