Thermoelastic Analysis of Functionally Graded Rotating Disks with Variable Thickness Involving Non-Uniform Heat Source

The research aims to investigate thermoelastic behavior of functionally graded rotating disks with variable thickness involving a non-uniform heat source. We assume material properties and thickness of rotating disks to vary in the radial direction. Axisymmetric thermal loads including non-uniform heat source, heat flux, and temperature boundary conditions are considered. To conduct corresponding simulations, two user subroutines are edited and incorporated into the commercial finite-element code ABAQUS. For verification, analytical formulations are derived and solved uniquely by symbolic calculations using the computing software Mathematica. The developed finite-element technique is then verified with very good agreement between results by ABAQUS and Mathematica.     

Adaptive blind receivers for MC‐CDMA communication systems

In this paper, we propose three adaptive blind algorithms for multiuser multicarrier code division multiple‐access systems in multipath fading channels. The proposed adaptive blind receivers are based on the property of the discreteness of the input data symbol and are updated in every symbol interval. We also use the concept that the variance of the output signal approaches to the variance of the desired signal to get the cost function. The three proposed receiver structures are the traditional finite impulse response (FIR) structure, the despreading (DES) filter structure and the generalized sidelobe canceller (GSC) structure. The advantage of the FIR filter is that the length of the filter weights does not have to be the same length as the spreading code. For the DES filter, the combination of the adaptive weight and the despreading code has the simplest structure than the other two proposed receiver structures. The constrained GSC filter is superior to the other two proposed receiver structures in the environments dominated by multiple‐access interference. By this constraint, the blind GSC filter can guarantee to converge to the desired solution. Simulation results are given to show the effectiveness and comparison of the proposed adaptive blind receivers. Copyright © 2012 John Wiley & Sons, Ltd.     

Negotiation‐based decision support model for utility relocations in transportation infrastructure projects

Highway projects in metropolitan areas often require that adjacent utilities be relocated to accommodate new or expanded highway facilities. Traditionally, utility owners have been responsible for their own relocations prior to highway construction. However, utility relocation delay was reported as one of the root causes of overall project delays in highway construction. In the USA, one strategic approach sporadically taken over the past 15 years by some state departments of transportation (DOTs) has been to combine utility relocation work with the highway contractor's scope of work. While the combined strategy offers many benefits, it does have its own set of challenges and disadvantages. Many of these difficulties involve disagreements between DOTs and utility owners over the appropriateness of the combined strategy for particular types of relocations. Hence, a negotiation‐based decision support model (DSM) for determining whether to use the combined strategy was developed to provide guidance to both DOTs and utility decision makers during the planning and design phases of highways. A literature review and interviews with experts from both DOTs and the utility industry were conducted to identify significant factors as well as their impact levels on the decision. A DSM aiming at synthesizing the factors and orchestrating the negotiation process for the decision was proposed and verified. As suggested by the model evaluators, the proposed DSM can improve the quality of this complex decision‐making process, especially for less experienced project managers or designers.     

Influence of the characteristics of a water-in-CO2 microemulsion on the separation of metal species

In this study, AOT [sodium bis(2-ethylhexyl) sulfosuccinate] combined with fluorinated cosurfactant or alcohol was used to form a water-in-CO₂ (W/C) microemulsion. The amount of water uptake in the microemulsion was closely related to the PFPE-PO₄/AOT (P/A) ratio. The stability of the microemulsion decreased with the amount of water. Lower temperature and higher pressure stabilize W/C microemulsions. The extraction efficiencies of metals (Cd, Co, Cu, Pb, Zn), when this W/C microemulsion method was used, exceeded 90% (AOT + octanol). The efficiencies for the extraction of Eu, La, and Sr could exceed 94% (AOT + PFPE-PO₄) in sc-CO_2.     

Morphological features and crystallization behavior of the conductive composites of poly(trimethylene terephthalate)/graphene nanosheets

Poly(trimethylene terephthalate) (PTT) composites filled with well‐dispersed graphene nanosheets (GNSs) were prepared through a coagulation method. The effects of increased GNS concentration on variations in the structure and properties of the PTT matrix, such as its electrical conductivity, crystallization kinetics, melting behavior, and crystal morphology, were investigated. Several analytical techniques were used, including electrical conductivity measurement, differential scanning calorimetry, Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, polarized light microscopy, transmission electron microscopy (TEM), and thermo‐gravimetric analysis (TGA). Electrical conductivity increased from 1.8 × 10^?17 S/cm for neat PTT to 0.33 ± 0.23 S/cm for PTT/GNS composites with 2.97 vol % GNS content. Percolation scaling laws were applied, and then threshold concentration and exponent were determined. In the case wherein liquid nitrogen was used to quench the melt, a mesomorphic phase was formed despite the extremely short crystallization time after adding high GNS contents. PTT crystallization rate increased with the gradual addition of GNSs. The enhanced crystallization kinetics was attributed to the high nucleation ability of GNSs to induce epitaxially grown lamellae on their surfaces, as revealed by TEM. PTT nuclei were randomly developed on the GNS surface to form the lamellae. However, crystallinity reached its maximum value near the electrical percolation threshold because the PTT chain mobility was confined after the GNS–GNS network formed. The growth of PTT banded spherulites in the bulk was still observed for composites with high GNS content, and TGA results revealed that the GNS‐filled PTT composites had excellent thermal stability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43419.     

An Assessment of the Applicability of Particle Light Scattering Theories to Birefringent Polycrystalline Ceramics

The applicability of particle light scattering theories to light attenuation in birefringent polycrystalline ceramics was investigated by measuring light transmittance in a model two‐phase system. The system consisted of microspheres of silica dispersed in a solution of glycerol in water. The composition of the liquid medium was chosen to produce a mismatch between the refractive index of the particles (n_p) and of the medium (n_m) equal to the root mean square of the refractive index variation in polycrystalline magnesium fluoride. The variations of the scattering coefficients (γ) with volume fraction of silica microspheres for three different particle diameters (0.5, 1.0 and 1.5 μm) were compared with theoretical predictions based on scattering efficiency of single particles (K) and linear extrapolation to multiparticle dispersed systems. The measured scattering coefficients were significantly greater than the theoretical values for particle volume fractions greater than 0.2. These results suggest that application of particle scattering theories to a birefringent polycrystalline ceramic, an intrinsically high volume fraction system, is tenuous at best.     

Thermoplastic polyvinyl alcohol/multiwalled carbon nanotube composites: Preparation,mechanical properties,thermal properties,and electromagnetic shielding effectiveness

This study uses the solution mixing method to combine plasticized polyvinyl alcohol (PVA) as a matrix, and multiwalled carbon nanotubes (MWCNTs) as reinforcement to form PVA/MWCNTs films. The films are then laminated and hot pressed to create PVA/MWCNTs composites. The control group of PVA/MWCNTs composites is made by incorporating the melt compounding method. Diverse properties of PVA/MWCNTs composites are then evaluated. For the experimental group, the incorporation of MWCNTs improves the glass transition temperature (T_g), crystallization temperature, T_c), and thermal stability of the composites. In addition, the test results indicate that composites containing 1.5 wt % of MWCNTs have the maximum tensile strength of 51.1 MPa, whereas composites containing 2 wt % MWCNTs have the optimal electrical conductivity of 2.4 S/cm, and electromagnetic shielding effectiveness (EMI SE) of ?31.41 dB. This study proves that the solution mixing method outperforms the melt compounding method in terms of mechanical properties, dispersion, melting and crystallization behaviors, thermal stability, and EMI SE. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43474.     

Development of a gel spinning process for high‐strength poly(ethylene oxide) fibers

This article describes a new gel‐spinning process for making high‐strength poly(ethylene oxide) (PEO) fibers. The PEO gel‐spinning process was enabled through an oligomer/polymer blend in place of conventional organic solvents, and the gelation and solvent‐like properties were investigated. A 92/8 wt% poly(ethylene glycol)/PEO gel exhibited a melting temperature around 45°C and was highly stretchable at room temperature. Some salient features of a gel‐spun PEO fiber with a draw ratio of 60 are tensile strength at break = 0.66 ± 0.04 GPa, Young's modulus = 4.3 ± 0.1 GPa, and a toughness corresponding to 117 MJ/m³. These numbers are significantly higher than those previously reported. Wide‐angle x‐ray diffraction of the high‐strength fibers showed good molecular orientation along the fiber direction. The results also demonstrate the potential of further improvement of mechanical properties. POLYM. ENG. SCI., 54:2839–2847, 2014. © 2014 Society of Plastics Engineers     

Miniemulsion polymerization of styrene. I. Preparation by redox initiator and new agitation mixer

Miniemulsion polymerization is usually conducted by a two-stage process, miniemulsion and polymerization, where the reactants are first processed using a high shearing machine, then transferred to a reactor to polymerize with magnetic stirring. However, the particles size distributions obtained usually are broad and skewed to small sizes owing to micelle and homogeneous nucleation in the aqueous solution. In this study, a saw-toothed blade mixer was successfully used for miniemulsion polymerization with a rotating rate over 500 rpm. The addition sequence of the components also affected the miniemulsion process in this system. The best result was obtained when the surfactant and cetyl alcohol were first dissolved in water and then the styrene was mixed in. Furthermore, a fast dissociated redox initiator system (cumene hydroperoxide/Fe²⁺/ethylenediaminetetraacetic acid-disodium salt/sodium formaldehyde sulfoxylate) was used to prepare miniemulsion polymer and monodisperse polystyrene. © 1996 John Wiley & Sons, Inc.