Finite element based fatigue life estimation of the solder joints with effect of intermetallic compound growth

This paper develops an analysis procedure to study the effects of intermetallic compound (IMC) growth on the fatigue life of 63Sn-37Pb (lead-rich)/96.5Sn-3.5Ag (lead-free) solder balls for flip-chip plastic ball grid array packages under thermal cycling test conditions. In this analysis procedure, the thickness of the IMC increased with the number of thermal cycles, and was determined using the growth rate equation. A series of non-linear finite element analyses was conducted to simulate the stress/strain history at the critical locations of the solder balls with various IMC thicknesses in thermal cycling tests. The simulated stress/strain results were then employed in a fatigue life prediction model to determine the relationship between the predicted fatigue life of the solder ball and the IMC thickness. Based on the concept of continuous damage accumulation and incorporated with the linear damage rule, this study defines the damage of each thermal cycle as the reciprocal of the predicted fatigue life of the solder joints with the corresponding IMC thickness. The final fatigue failure of the solder ball was determined as the number of cycles corresponding to the cumulative damage equal to unity. Results show that the solder joint fatigue life decreased as the IMC thickness increased. Moreover, the predicted thermal fatigue life of lead-rich solders based on the effects of IMC growth is apparently smaller than that without considering the IMC growth in the reliability analysis. Results also show that the influence of the IMC thickness on the fatigue life prediction of the lead-free solder joint can be ignored.     

Effect of silanes on the morphology,hydrophobicity, and dynamical mechanical properties of polyimide/silica hybrid membranes

Polyimide (PI)/silica hybrid membranes with high contact angles were prepared through the in situ sol–gel process. The precursor, poly(amic acid) with controlled block chain length, was synthesized using 4,4′‐diaminodiphenyl ether (ODA), 3,3′,4,4′‐benzophenone‐tetracarboxylic dianhydride (BTDA) and 3‐aminopropyl‐trimethoxysilane (APrTMOS) or 3‐aminopropyldimethylethoxysilane (APDiMOS). And then, phenyltrimethoxysilane (PTS) or tetramethoxysilane (TMOS) or methyltrimethoxysilane (MTrMOS) was respectively, added to the above polyamic acid and mixed thoroughly. Following curing reaction, the PI/silica hybrid membranes with different cross‐linkages, silica content, and hydrophobic properties were prepared. The effect on the formation of PI imide ring during imidization reaction is increased as the increase of silanes content and characterized by frequency shiftment and absorbance ratio of Fourier transform infrared (FTIR) measurements. All the hybrid membranes show high transparency though with high silica contents. The storage modulus, tan δ, and damping intensity by DMA measurements are all correlated with silane content or block chain length. And all these membranes with silane content possess high contact angle as compared to pure PI without any silanes added and the contact angles increase with increasing the silane content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mobile common friends discovery with friendship ownership and replay-attack resistance

Online social networking applications are nearly ubiquitous, but are currently limited to trusted infrastructure. For example, two unfamiliar users can exploit their social proximity to discover common friends, but otherwise face considerable difficulty in discovering of things they may have in common. However, social proximity depends on access personal data, raising concerns regarding potential data leakage from databases, the degree of trust in the particular social proximity, and user unwillingness to disclose the nature of personal friendships. Previous works have used mobile middleware to provide alternatives to hosting personal data in a fixed database, but these approaches still require users to divulge private information. Other approaches have used private-preserved decentralized online social networks to solve centralization and privacy issues, but these methods are still subject to other security problems such as mutual authentication, data-spoofing and replay attacks. This paper proposes the development of secure mobile common friends discovery methods to preserve the privacy of friendship data, establish mutual authentication between contact users, provide mutual proof of friendship, and provide protection against friendship spoofing and replay attacks. The proposed methods are shown to be secure and efficient, and are implemented in mobile phones that allow users to find common friends securely in seconds.     

Characteristics of Gelatin from Giant Grouper (Epinephelus Lanceolatus) Skin

Gelatin extraction from the skin of giant grouper (Epinephelus lanceolatus) was conducted by acid process with a yield of 20.27 g/100 g wet skin sample. The characteristics of extracted gelatin from giant grouper was investigated in this study, and further compared to that from commercial tilapia. Results showed that when compared to commercial tilapia, giant grouper had lower levels of bloom strength and foam formation ability, but greater values of viscosity, foam stability, and lightness (L*) on gelatin skin. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis analysis revealed three high-bands intensities of major protein components of giant grouper skin gelatin, representing α1-chain, α2-chain, and β-components, and was similar to that of standard calf skin collagen type I. Compared to giant grouper, commercial tilapia contained extra proteins with molecular weight less than 70 kDa on the sodium dodecyl sulphate-polyacrylamide gel electrophoresis of both skin gelatins.     

Biobased adhesives,gums, emulsions,and binders: current trends and future prospects

Biopolymers derived from renewable resources are an emerging class of advanced materials that offer many useful properties for a wide range of food and nonfood applications. Current state of the art in research and development of renewable polymers as adhesives, gums, binders, and emulsions is the subject of this review. Much of the focus will be on major biopolymers such as starch, proteins, lignin, oils, and their derivatives found in both natural and modified forms, but other biopolymers of promising commercial interest will also be included where warranted. Polymers produced in nature are remarkably diverse in their chemistry, thermomechanical properties, rheology, plasticity, and chemical reactivity. In particular, their capacity to undergo a wide array of chemical modifications yields materials with tailored properties suitable for use as adhesives, gums, coatings, emulsions, and binders. Many such materials are now widely used in commercial products like building materials, lubricants, sealants, coatings, bonding aids, pharmaceuticals, paper, glues, flocculants, processed and frozen foods, as well as tissue engineering and bone repair products. This review provides a general overview of biobased polymers highlighting their source, availability, properties, and usage in industrial products along with the future prospects, challenges, and opportunities they offer.     

The application of fuzzy control on energy saving for multi-unit room air-conditioners

Most research, on energy saving methods for air-conditioners have focused on large chillers as its subject. As most school offices, laboratories, and classrooms are equipped with unitary systems for air-conditioning, this paper discusses methods for energy savings with regard to unitary systems. This paper will put forward the fuzzy temperature control method for multi-unit air-conditioners to enhance energy efficiency. The results show that the use of fuzzy control is efficient for energy saving as well as causing temperature control be steadier, even if there is a change to the thermal loading, the fuzzy control system is able to control the air-conditioning in stable conditions.     

A variable scaling hybrid differential evolution for solving large-scale power dispatch problems

A variable scaling hybrid differential evolution (VSHDE) is used to solve the large-scale power dispatch problems. The hybrid differential evolution (HDE) method has been presented as a method using the parallel processors of the two-membered evolution strategy ((1 t 1)-ES). In this way, the global search ability for the HDE can be inspected. To accelerate the search for the global solution, the concept of the variable scaling factor based on the one-fifth success rule of evolution strategies is embedded in the original HDE. The use of the variable scaling factor in the VSHDE can overcome the drawback of the need for fixed and random scaling factors in an HDE. To realise the dynamic economic dispatch (DED) system, the valve-point loading effect, system load demand, power losses, spinning reserve capacity, ramp rate limits and prohibited operation zones are considered here. Two test problems and two DED systems including those of 10 units and 20 units are used to compare the performance of the proposed method with an HDE. Numerical results show that the performance of the proposed method is better than that of the HDE method.     

Reinforced concrete beam–column joint strengthened with carbon fiber reinforced polymer

An effective rehabilitation strategy is proposed to enhance the strength and stiffness of the beam–column joint in this study. An analytical model is proposed to predict the column shear of the joints strengthened with carbon fiber reinforced polymer (CFRP). Three full scale interior beam–column joints, including two specimens strengthened with CFRP and one prototype specimen, are tested in this study. The specimens are designed to represent the pre-seismic code design construction in which there is no transverse reinforcement. A new optical non-contact technique, digital image correlation (DIC), which can measure the full strain field of specimen, is used to measure and observe the full strain field of the joint. The experimental results show that the beam–column joints strengthened with CFRP can increase their structural stiffness, strength, and energy dissipation capacity. The rehabilitation strategy is effective to increase the ductility of the joint and transform the failure mode to beam or delay the shear failure mode. By observing the measured results, it is found that the mechanical anchorages can prevent the debonding of CFRP. Comparing the analytical and experimental results, the proposed model can accurately predict the column shear and shear strength of the joints strengthened with CFRP.     

BCB-bridged distributed wideband SPST switch using 0.25-/spl mu/m In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As metamorphic HEMTs

In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As metamorphic high-electron mobility transistor (mHEMT) dc-30 GHz distributed single-pole-single through (SPST) switches were designed and fabricated using the low-/spl kappa/ benzocyclobutene (BCB) bridged technology. The current gain cutoff frequency, and the electron transit time of In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As mHEMTs have been investigated. By analyzing the extrinsic total delay time, the effective velocity of electrons can be estimated, and the average velocity is 2.3/spl times/10/sup 7/cm/s. The dc-30 GHz distributed wideband SPST switch exhibits an insertion loss of less than 5.5 dB, and an isolation larger than 30 dB, which is the first demonstration of the high-isolation of InAlAs-InGaAs mHEMTs monolithic switch. As to the power performance, this switch can handle the power up to 12 dBm at 2.4 GHz. After over 250 h of 85-85 (temperature =85/spl deg/C, humidity =85%) environmental evaluation, this BCB passivated and bridged microwave and monolithic integrated circuit switch demonstrates reliable RF characteristics without any significant performance change, which proves that this process using the low-/spl kappa/ BCB layer is attractive for millimeter-wave circuit applications.     

Life prediction of stainless steels by cyclic and stable hysteresis curves

Abstract

This study develops an analytical expression to describe the cyclic stress‐strain curve obtained from a series of fully‐reversed fatigue tests. A set of stress‐strain relationships is proposed to simulate the tensile branch of the stable hysteresis loop. The complete shape of the stable hysteresis loop is then constructed and the associated theoretical plastic work calculated by integrating the area within the enclosed curve. The theoretical plastic work is employed to predict the fatigue lives of the investigated materials on the basis of their respective stable plastic work per cyclelife curves. In this paper, the current mathematical derivations are based upon the endochronic theory of plasticity. The accuracy of the proposed set of stress‐strain relationships is verified by conducting fully‐reversed constant strain amplitude fatigue tests on AISI 316 and AISI 304 stainless steels. The experimental and simulation results are found to be in good agreement, hence confirming the accuracy of the proposed analytical stress‐strain relationships. Again, comparing the obverted and predicted fatigue lives, a good agreement is found between the two sets of results.