Selective dissolution of nanolamellar Ti–41 at.% Al alloy single crystals

The selective dissolution behavior of Ti–41 at.% Al single crystals having a α₂/γ-lamellar structure with a lamellar thickness in the range 20 nm to 1 μm have been investigated in 0.5 M NaCl aqueous solution focusing on the effect of lamellar thickness on the dissolution of γ-lamellae. In the case where γ-lamellae were thicker than ～100 nm on average, γ-lamellae were selectively dissolved and, as a result, crevasses whose widths were close to the γ-lamellae thicknesses were formed. However, not all γ-lamellae were dissolved and the distribution of crevasses was much less uniform compared with that of the γ-lamellae. On the other hand, when the average γ-lamellae thickness was <100 nm relatively thick γ-lamellae were preferentially dissolved, but the distribution of the crevasses was relatively uniform compared with that obtained from the coarse lamellar structure. The reasons for this difference are discussed from the viewpoint of the absence of misfit dislocations in nanoscaled lamellae and the difference in ion transport through crevasses of different width formed by dissolution of γ-lamellae.     

Adsorption of cationic monomeric and gemini surfactants on montmorillonite and adsolubilization of vitamin E

Adsorption of a cationic gemini surfactant (1,2-bis(dodecyldimethylammonio) ethane dibromide, 12-2-12) and the corresponding monomeric surfactant (dodecyltrimethylammonium bromide, DTAB) on montmorillonite has been characterized with a combination of adsorption isotherm, interlayer spacing and FT-IR spectroscopic data. Adsolubilization of vitamin E into the adsorbed surfactant layers has also been studied. The adsorption isotherm data reveal that the adsorption of the two surfactants is driven by the two factors: one is the cation exchange that occurs on the interlayer basal planes and the other is the hydrophobic interaction between hydrocarbon chains of the surfactants. Although the adsorbed amount measured in the saturation region (in mol g(-1)) is almost identical for the two surfactants, the conformation of the intercalated surfactant molecules differs significantly from each other. The adsorption of DTAB results in a lateral bilayer arrangement in the limited interlayer space, whereas 12-2-12 gives a normal bilayer arrangement in the expanded interlayer space. Adsolubilization of vitamin E takes place into the adsorbed surfactant layers, and interestingly, all the vitamin E molecules added in the montmorillonite suspensions are hybridized at lower surfactant concentrations due to the great specific surface area of the clay material. Since the maximum adsolubilization amount is usually obtained just below the critical micelle concentration, the gemini surfactant is deemed to be more efficient than the corresponding monomeric one to achieve the great adsolubilization amount.     

Analysis of biphasic lubrication of articular cartilage loaded by cylindrical indenter

Combination of theoretical biphasic analyses and corresponding experimental measurements for articular cartilage has successfully revealed the fundamental material properties and time-depending mechanical behaviors of articular cartilage containing plenty of water. The insight of load partitioning between solid and fluid phases advanced the prediction of the frictional behavior of articular cartilage. One of the recent concerns about biphasic finite element (FE) analysis seems to be a dynamic and physiological condition in terms of mechanical functionality as a load-bearing for articular joint system beyond material testing, which has mainly focused on time-dependent reaction force and deformation in relatively small and low speed compression. Recently, the biphasic FE model for reciprocating sliding motion was applied to confirm the frictional effect on the migrating contact area. The results indicated that the model of a cylindrical indenter sliding over the cartilage surface remarkably sustained the higher proportion of fluid load support than a condition without migrating contact area, but the effectiveness of constitutive material properties has not been sufficiently evaluated for sliding motion. In our present study, at the first stage, the compressive response of the articular cartilage was examined by high precision testing machine. Material properties for the biphasic FE model, which included inhomogeneous apparent Young's modulus of solid phase along depth, strain-dependent permeability and collagen reinforcement in tensile strain, were estimated in cylindrical indentation tests by the curve fitting between the experimental time-dependent behavior and FE model simulation. Then, the biphasic lubrication mechanism of the articular cartilage including migrating contact area was simulated to elucidate functionality as a load-bearing material. The results showed that the compaction effect on permeability of solid phase was functional particularly in the condition without the migrating contact area, whereas in sliding condition the compaction effect did not clearly show its role in terms of the proportion of fluid load support. The reinforcement of solid phase, which represented the collagen network in the tissue, improved the proportion of fluid load support especially in the sliding condition. Thus, a functional integration of constitutive mechanical properties as a load-bearing was evaluated by FE model simulation in this study.     

Possible Involvement of the Upregulation of ΔNp63 Expression Mediated by HER2-Activated Aryl Hydrocarbon Receptor in Mammosphere Maintenance

Cancer stem cells (CSCs) contribute to the drug resistance, recurrence, and metastasis of breast cancers. Recently, we demonstrated that HER2 overexpression increases mammosphere formation via the activation of aryl hydrocarbon receptor (AHR). In this study, the objective was to identify the mechanism underlying mammosphere maintenance mediated by HER2 signaling-activated AHR. We compared the chromatin structure of AHR-knockout (AHRKO) HER2-overexpressing MCF-7 (HER2-5) cells with that of wild-type HER2-5 cells; subsequently, we identified TP63, a stemness factor, as a potential target gene of AHR. ΔNp63 mRNA and protein levels were higher in HER2-5 cells than in HER2-5/AHRKO cells. Activation of HER2/HER3 signaling by heregulin treatment increased ΔNp63 mRNA levels, and its induction was decreased by AHR knockdown in HER2-5 cells. The results of the chromatin immunoprecipitation assay revealed an interaction between AHR and the intronic region of TP63, which encodes ΔNp63. A luciferase reporter gene assay with the intronic region of TP63 showed that AHR expression increased reporter activity. Collectively, our findings suggest that HER2-activated AHR upregulates ΔNp63 expression and that this signaling cascade is involved in CSC maintenance in HER2-expressing breast cancers.     

Substitution effects on the electronic anomaly and superconductivity in La2−xBaxCuO4 and La2−xSrxCuO4 with x ∼ 1/8

The effects of substitution of Y or Bi on the low-temperature structural phase transition, electronic anomaly and superconductivity have been studied in La_2-y-xY_yBa_xCuO La_2-y-xBi_yBa_xCuO₄ and La_1.9-y-xTb_0.1Bi_ySr_xCuO₄ with x = 1/8. Moreover, an electronic anomaly, which is analogous to those observed in La_2–xBa_xCuO₄ and La_1.6-xNd_0.4Sr_xCuO₄ with x 1/8, has been found below about 60 K in the thermoelectric power measurements for the Zn-substituted La_2–xSr_xCu_1–yZn_yO₄ with x 0.115 and y = 0.01 – 0.02. These experimental results support the conclusions by Tranquada et al. that static order of the stripe correlations of holes and spins, owing to pinning by the low-temperature structure or impurities (Zn in this case), is the origin of the electronic anomaly, leading to the suppression of superconductivity.     

A self-converging atomized mist spray device using surface acoustic wave

This paper presents an innovative versatile method aiming at rapid fabrication of a master for polydimethylsiloxane (PDMS) molding. This technology is relying on liquid dielectrophoresis electromechanical microfluidic transduction for programmable ultraviolet (UV) glue manipulation. It enables formation of the master in a tailor-made approach, avoiding the need of micromachined structures unlike in conventional methods. The principle is simple: UV glue, while in liquid phase, is actuated onto an array of electrodes patterned on a Si substrate and cured afterward by UV exposure. The silicon chip and the glue microstructures defined atop of it then play the role of a master for PDMS molding. The glue microstructures’ shape is hemispherical which is of high interest for many microfluidic applications. This concept is assessed and validated with two different PDMS chip replica designs, both of them illustrating representative applications in continuous microfluidic: a T-junction design for inflow droplet generation and a “Quake” type valve. Lastly, this protocol has shown to be recyclable since the UV glue microstructures once formed can be easily removed by immersion in an acetone bath, such as the chip is reset and can be reprogrammed afterward to build another glue channels geometry.     

Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers

The present work reports how metallurgical factors such as grain size and chemical composition of substrate affect the current behavior during anodization and the morphology of resulting formed oxide layers. The grain size of pure Ti sheet is controlled by the accumulative roll-bonding (ARB) process. Tubular oxide layers are formed on the ARB-processed Ti sheets with different grain sizes, but grain size does not affect the length, diameter of tubes and the degree of tube arrangement. The effect of chemical composition is examined using Ti-Zr alloys (Ti-20Zr, Ti-50Zr, Ti-80Zr) that can consist of a single phase, meaning that homogeneous tube formation can be achieved. With increasing Zr content in the alloys, tube diameter decreases while tube length increases. For the Ti-50Zr and Ti-80Zr, self-organization is achieved on two size scales, that is, nanotube arrays with two distinct diameters are observed. TEM observation revealed that anodic oxide layers are in crystalline state only in the case of pure Zr.