Blue electroluminescent devices withSrGa2S4:Ce for full-color display

In order to realize full-color electroluminescent (EL) displays, which are expected as a dominant candidate for the future multimedia flat panel display, blue EL devices with SrGa₂S₄:Ce have been prepared by molecular beam epitaxy (MBE). This paper proposes a novel deposition method employing Sr metal and Ga₂S₄ compound as the source materials. A single-phase SrGa₂S₄ layer is obtained in a Ga₂S₃/Sr flux ratio of 60 and at the growth temperature of 560°C. We have obtained the well-saturated blue with CIE color coordinates of x=0.14, y=0.14 and brighter blue EL devices made by optimizing the growth conditions in MBE. The maximum luminance of 70 cd/m² in comparison with the 3 cd/m₂ of our previous EL devices, is achieved at a driving frequency of 1 kHz     

Athermal silica-based arrayed-waveguide grating multiplexer

A temperature dependent channel wavelength shift in a silica-based arrayed-waveguide grating multiplexer is successfully suppressed from 0.95 to 0.05 nm in the 0-85°C temperature range, which means that it can be used in practical WDM systems without the need for temperature control     

Patterns of expression for the mRNA corresponding to the four isoforms of phospholipase Cbeta in mouse brain

Ligand binding to neurotransmitter and hormone receptors which couple to the Gq subclass of GTP-binding protein leads to the activation of phospholipase Cbeta (PLCbeta) which hydrolyses phosphatidyl-inositol 4,5-bisphosphate, yielding a pair of second messengers, diacylglycerol and inositol 1,4,5-trisphosphate (IP3). The expression of PLCbeta1-4 mRNAs was comparatively examined by in situ hybridization in the mouse brain. In adults, PLCbeta1 mRNA was expressed predominantly in the telencephalon, including the cerebral cortex, hippocampus, amygdala, lateral septum and olfactory bulb, with little expression in most thalamic nuclei. PLCbeta2 mRNA was distributed in the white matter, suggesting its expression in non-neuronal cells, most likely oligodendrocytes. PLCbeta3 mRNA was specifically expressed in cerebellar Purkinje cells. The highest levels of PLCbeta4 mRNA were detected in Purkinje cells. High levels of PLCbeta4 mRNA were also found in the thalamus and medial septum, whereas weak signals were detected in most telencephalic regions, thus showing an expression pattern almost reciprocal to that of PLCbeta1 mRNA. During development, such characteristic regional expression of PLCbeta1 and PLCbeta4 were observed starting in late foetal stages, while specific expression of PLCbeta2 and PLCbeta3 appeared in early postnatal stages. We conclude that despite the existence of four PLCbeta isoforms, only one or two of them is expressed in individual neurons and glial cells. The distinct expression of PLCbetas provides a molecular basis for analysing the nature of the specific signal transduction pathway leading to the production of diacylglycerol and IP3 in distinct cell types and in different regions of the brain.     

A new porto-systemic bypass technique for hepatopancreatoduodenectomy with portal vein resection

When reconstructing the portal vein (PV) following hepatopancreatoduodenectomy (HPD) with PV resection, a new porto-systemic bypass (PSB) technique can be employed to prevent intestinal vascular congestion. The Whipple procedure is performed in a standard manner, as long a portion of the gastrocolic trunk is preserved for insertion of an antithrombogenic catheter (ATC). After harvesting the left external iliac vein and exposing the right great saphenous vein, the end of the ATC is inserted in the superior mesenteric vein via the gastrocolic trunk in the distal direction and the other end of the ATC is inserted in the greater saphenous vein. PSB is achieved as a result of the venous pressure gradient. By employing this technique, an ATC can be inserted without damaging another mesenteric venous branch and with minimal damage to the endothelium, and the small intestine is not exposed in the operative field until enteric reconstruction is started. This technique is a promising option for PSB during HPD with PV resection.     

Changes of biochemical markers during fracture healing

Clinical diagnosis of canine nasal mite (Pneumonyssoides caninum) infection is difficult due to the mite's location in the caudal nasal cavity and frontal sinuses. The current study was performed to evaluate the efficacy of milbemycin oxime in treating dogs with nasal mite infection. A prospective open uncontrolled study included 20 dogs with case histories indicating possible nasal mite infection. Inclusion criteria consisted of either nasal mites being demonstrated (group 1, four dogs), or suspicious clinical signs with no other apparent causes, combined with eosinophilia (group 2, 16 dogs). Milbemycin oxime 1 mg/kg was given orally three times at 10-day intervals. In 17 (85 per cent) dogs, clinical signs resolved completely following milbemycin therapy; within 10 days of the first treatment in 13 cases (group 1, four dogs; group 2, nine dogs) and within 14 days in four cases. In the remaining three dogs clinical signs persisted but were diminished.     

Novel UV absorbers prepared from 2,4-dihydroxybenzophenone and hexachlorocyclotriphosphazene

The UV-stabilizing ability and thermal loss from the polystyrene film of novel UV absorbers, 2-[(3-hydroxy-4-benzoyl) phenoxy] pentachlorocyclotriphosphazene (HBPC) and hexakis[ (2-hydroxy-4-benzoyl) phenoxy] cyclotriphosphazene (HBPP), were investigated. The UV-stabilizing ability of HBPC estimated by the formation of carbonyl groups in polystyrene was comparable to that of 2,4-dihydroxybenzophenone (DHB), suggesting that the phosphazene moiety does not affect the efficiency of the stabilizing ability of DHB units. No significant difference of efficiency per stabilizing units between HBPC and HBPP was observed. HBPC and HBPP are noteworthy for their low thermal losses from the polystyrene film, i.e., the thermal loss of HBPP was completely suppressed and the diffusion coefficient of HBPC at 160°C was two orders of magnitude smaller than that of DHB. The thermogravimetric analysis and differential scanning calorimetry measurement showed that HBPC and HBPP are nonvolatile and stable up to 230 and 300°C, respectively. © 1993 John Wiley & Sons, Inc.     

Cognitive model of team cooperation in en-route air traffic control

Since controller teams are in charge of en-route air traffic control, team cooperation is a key issue for good control performance. We conducted ethnographic field observation at the Tokyo Area Control Center and then analyzed the obtained data to develop a cognitive model of team cooperation in en-route air traffic control. We segmented conversational records, behavioral records, and so on by control unit, and then clarified relations between the segments and identified expert knowledge and judgment behind them. Cognitive processes of controller teams were reconstructed based on a concept of distributed cognition. The analysis revealed that the mutual belief model is applicable to team cooperation processes, the role assignment of tasks within a controller team is implicit and that control plans are implemented smoothly once team situation awareness has been established. A cognitive model of controllers?? team cooperation has been constructed based on these findings.     

Electric field-induced concentration and capture of DNA onto microtips

Simple, high-yield concentration of DNA is important for high-throughput genetic analysis and disease diagnosis. Glass-based microfilters are popular but the process requires centrifugation steps with cumbersome chemical processes. As an alternative, a concentration method using an electric field has been explored previously, but with limited efficiency. In this paper, electric field-induced concentration and capture of DNA are studied by using high-aspect-ratio microtips coated with a gold layer. The microtips are immersed longitudinally into a solution of 100???L containing ??-phage DNA. After DNA concentration using an electric field, the microtips are withdrawn from the solution. Under AC- and biased AC fields, DNA is concentrated by electrophoresis (EP), dielectrophoresis (DEP), and electroosmotic flow (EOF). To reduce capillary effects in the withdrawal process, the microtips are coated with positively charged poly-l-lysine (PLL). The pattern of captured DNA is analyzed by fluorescence microscopy. DEP attracts DNA molecules at the edges of microtips, where the highest gradient of electric field exists. EP attracts DNA onto the surface of microtips following the vectors of an electric field. EOF generates vortexes that deliver DNA onto microtips. Using this method, 85% of DNA is captured on the PLL-coated microtips after three sequential captures. The concentration mechanism can potentially facilitate rapid and simple preparation of DNA for downstream analysis.     

Large magnetoresistivity of sputtered Al-(O or N)-Bi alloys

Application of the sputtering technique to (Al₂O₃)_xBi_100–x and (AIN)_x Bi_100–x (x = 0 to 100%) has been found to result in the formation of a duplex material consisting of hexagonal bismuth particles dispersed finely and homogeneously in amorphous Al_xO_y and Al_xN_y matrices. The particle size and interparticle distance of the bismuth phase were about 5 to 140nm and 5 to 35 nm. The duplex alloys have high electrical resistivities ranging from 1.82 × 10³ to 3.16 × 10⁵ cm combined with a negative temperature-dependent resistivity of 148 to 342% of ₂₇₃. Furthermore, all the Al-O-Bi and Al-N-Bi alloys have been found to exhibit a positive magnetoresistive change and the maximum value, (H), at 4.2 K and 7.5T reaches 5.85 × 10⁴ cm for (Al-O)_65.7Bi_34.3 and 1.99 × 10⁵ cm for (Al-N)_69.7 Bi_30.3. The large magnetoresistivities are probably due to the unique sputtered structure consisting of metallic bismuth particles with a long mean free path of electrons embedded finely and homogeneously in amorphous Al_xO_y or Al_xN_y matrix, resulting in the large difference of the relaxation times (different mobilities) of electron carriers. It has thus been demonstrated that the oxide- or nitride-based composite materials exhibiting large magnetoresistivities, which cannot be achieved in metallic composite materials, are obtained by sputtering simultaneously Al₂O₃ or AIN and bismuth which is immiscible to aluminium.