Design on semiconductor coupled SAW convolver

This paper presents results of a design study on a semiconductor coupled surface acoustic wave (SAW) convolver in which bi-directionally propagating SAWs, on a piezoelectric substrate with a high coupling coefficient, couple with bonded semiconductor diodes through multistrips. To obtain convolution signals with a high efficiency, we adopted a diode-balanced bridge structure for the nonlinear operation. We also found that the tapping pitches of the multi-strip electrodes have robustness against operation frequency variation and temperature-dependent variation on the delay of the SAW. We verified the effectiveness of the device in. a circuit simulation and an experiment on a test circuit, which was fabricated by using an epitaxial lift-off film-bonding process.     

Implementation of Fault-Tolerant GridRPC Applications

A task parallel application is implemented with Ninf-G, a GridRPC system. A series of experiments are conducted on the Grid testbed in Asia Pacific for three months. Through tens of long executions, typical fault patterns were collected, and instability of the network throughput was determined to be a major reason of the faults. Several important points are stressed to avoid task throughput decline due to the fault-recovery operations: Timeout minimization for fault detection, background recovery, redundant task assignments, and so on. This study also issues a steer for design of the automated fault-tolerant mechanism in an upper layer of the GridRPC framework.     

Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Multiple fuzzy state-value functions for human evaluation through interactive trajectory planning of a partner robot

The purpose of this study is to develop partner robots that can obtain and accumulate human-friendly behaviors. To achieve this purpose, the entire architecture of the robot is designed, based on a concept of structured learning which emphasizes the importance of interactive learning of several modules through interaction with its environment. This paper deals with a trajectory planning method for generating hand-to-hand behaviors of a partner robot by using multiple fuzzy state-value functions, a self-organizing map, and an interactive genetic algorithm. A trajectory for the behavior is generated by an interactive genetic algorithm using human evaluation. In order to reduce human load, human evaluation is estimated by using the fuzzy state-value function. Furthermore, to cope with various situations, a self-organizing map is used for clustering a given task dependent on a human hand position. And then, a fuzzy state-value function is assigned to each output unit of the self-organizing map. The robot can easily obtain and accumulate human-friendly trajectories using a fuzzy state-value function and a knowledge database corresponding to the unit selected in the self-organizing map. Finally, multiple fuzzy state-value functions can estimate a human evaluation model for the hand-to-hand behaviors. Several experimental results show the effectiveness of the proposed method.     

Adaptive Ray‐bundle Tracing with Memory Usage Prediction: Efficient Global Illumination in Large Scenes

This paper proposes an adaptive rendering technique for ray‐bundle tracing. Ray‐bundle tracing can be done by per‐pixel linked‐list construction on a GPU rasterization pipeline. This rasterization based approach offers significant benefits for the efficient generation of light maps (e.g., hardware acceleration, tessellation, and recycling of shaders used in real‐time graphics). However, it is inapplicable to large and complex scenes due to the limited capacity of the GPU memory because it requires a high‐resolution frame buffer and high‐capacity node buffer for the linked‐lists. In addition, memory overflow can potentially occur on the per‐pixel linked‐list since the memory usage of the lists is usually unknown before the rendering process. We introduce an adaptive tiling technique with memory usage prediction. Our method uses an appropriately tiled frame buffer, thus eliminating almost all of the overflow risks thanks to our adaptive tile subdivision scheme. Using this technique, we are able to render high‐quality light maps of large and complex scenes which cannot be computed using previous ray‐bundle based methods.     

Development of new‐type outdoor termination using composite insulator with SF6 gas: Commercial use for 77‐kV transmission lines and development for 154‐kV XLPE cable

Recently, composite insulators have been increasingly employed mainly for economic reasons. We have developed a new type of outdoor termination using a composite insulator, which can be installed horizontally on a steel tower in order to reduce the construction cost. In this outdoor termination, SF₆ gas is filled in the composite insulator and a cold shrinkable premolded rubber unit is applied instead of the combined use of a rubber‐molded stress relief cone, epoxy resin insulator and spring unit. The application of the composite insulator, SF₆ gas and cold shrinkable premolded rubber unit reduces the total weight and makes it possible to install the termination horizontally on the tower. The new‐type outdoor termination for 77‐kV XLPE cable has already been applied in commercial use and enabled a reduction of the construction costs for power transmission lines. A 154‐kV new‐type outdoor termination has been developed and its initial electrical tests were successfully completed. This paper describes the design and performance of both 77‐kV and 154‐kV new‐type outdoor termination, and a follow‐up survey of the 77‐kV new termination in a commercial use. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 18– 26, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20511     

Creation of Titania Artificial Interfaces with Geometric Patterns by Using Microstereolithography and Aqueous Solution Techniques

Titania micropatterns with periodic arrangements were successfully formed on glass substrates for use with electromagnetic wave energy resonance and localizations in terahertz frequency ranges. Geometric arrangements of acrylic polygonal tablets with titania particle dispersions were fabricated by using micropatterning stereolithography. Moreover, periodically arranged full anatase‐phase titania tablets were created homogeneously through liquid‐phase crystal depositions of water solvent processes, using microtemplates fabricated by using the stereolithography system. The terahertz wave properties were measured and calculated by using a time‐domain spectroscopic system and finite‐difference time‐domain method.     

Acid catalytic hydrothermal conversion of carbohydrate biomass into useful substances

Acidic hydrothermal degradation of glucose was examined in the presence of HCl, H₂SO₄, and H₃PO₄ with pH varying from 1.5 to 2.5 and reaction time varying from 1 to 10 min at 523 K, to investigate the effect of different acid catalysts and acid concentration on the production of 5-hydroxymethyl-2-furaldehyde (HMF) and levulinic acid from glucose. At lower acidities of pH 2.5, a considerably higher amount of HMF was produced. The increase in acid concentration accelerated the conversion of HMF to levulinic acid. The order for the production of HMF using the three acids is in the sequence of H₃PO₄ > H₂SO₄ > HCl. On the contrary, the order for production of levulinic acid follows HCl > H₂SO₄ > H₃PO₄. In the experimental conditions used in this study, the highest yield of levulinic acid is about 55%, which was obtained at pH 1.5 for 5 min in the case of HCl as an acid catalyst, and the total highest yields of HMF and levulinic acid are about 50%, which occurred at pH 2.0 for 5 min in the case of H₃PO₄ as an acid catalyst.     

Alternation on rolling contact properties of steel due to magnetic field

This paper describes the effects of magnetic field on rolling contact performance of steel/steel disc couple and presents an investigation into the mechanisms governing these effects by applying contact mechanics and magnetism theory.The tests were carried out in disc-on-disc contact configuration under 1.1 T [Tesla] of horizontal static magnetic fields created by permanent magnets in three different orientations.Wear amounts were decreased in the magnetic fields and there was difference in magnetic field orientation. For the characteristic of the surface, results of scanning electron microscope observations point out that finer wear particles and smoother worn surfaces are produced in the presence of magnetic field. The smoother surfaces are also confirmed by surface roughness measurements. For the generation of the finer wear particles, it is considered that subsurface crack initiation point is moved toward the surface due to magnetic field.The effect of magnetic field is considered by calculating the number of cycles required to generate wear particles and the cycle was reduced due to the presence of magnetic field.It is considered, from views of contact mechanics and magnetism theory, that domain walls near the contact region are caught by dislocations when the specimen is magnetised and part of the energy for magnetisation activates the dislocation movement resulting in crack initiation.     

Oxidative Stress and Its Significant Roles in Neurodegenerative Diseases and Cancer

Reactive oxygen and nitrogen species have been implicated in diverse pathophysiological conditions, including inflammation, neurodegenerative diseases and cancer. Accumulating evidence indicates that oxidative damage to biomolecules including lipids, proteins and DNA, contributes to these diseases. Previous studies suggest roles of lipid peroxidation and oxysterols in the development of neurodegenerative diseases and inflammation-related cancer. Our recent studies identifying and characterizing carbonylated proteins reveal oxidative damage to heat shock proteins in neurodegenerative disease models and inflammation-related cancer, suggesting dysfunction in their antioxidative properties. In neurodegenerative diseases, DNA damage may not only play a role in the induction of apoptosis, but also may inhibit cellular division via telomere shortening. Immunohistochemical analyses showed co-localization of oxidative/nitrative DNA lesions and stemness markers in the cells of inflammation-related cancers. Here, we review oxidative stress and its significant roles in neurodegenerative diseases and cancer.