Hydrothermal Formation of Hydroxyapatite Layers on the Surface of Type-A Zeolite

Type-A zeolite evenly covered with hydroxyapatite thin layers was prepared using hydrothermal treatment at 120°C for 8 h under autogenous pressure. The hydroxyapatite needlelike nanocrystals, 100–200 nm in diameter and 30 nm in thickness, were grown under the reaction between discharged Ca²⁺ ions from type-A zeolite and PO₄³⁻ ions in (NH₄)₃PO₄ solution. The preferential orientations of the c -axis of hydroxyapatite crystals perpendicular to a zeolite surface were observed using transmission electron microscopy. The crystal structure of type-A zeolite was not destroyed under the reaction, but the surface morphology was changed only with complete covering of scaly hydroxyapatite particles.     

Synthesis and luminescence properties of Pr3+ doped CaxBa1?xTiO3 (0.3?x<1) fine particles

Ca _x Ba_1−x TiO₃ (CBT) fine particles doped with red luminescence center of Pr³⁺ ions (Pr: CBT) were successfully synthesized by salt assisted spray pyrolysis (SASP) process. Scanning electronic microscope (SEM) and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr³⁺ ions doped CBT fine particles. The luminescence properties, such as photoluminescence (PL) and mechanoluminescence (ML), of as-synthesized Pr: CBT particles were investigated. For Pr: CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr: CBT fine particles become stronger and stronger. When pressure was loaded on the Pr: CBT pellet, mechanoluminescence(ML) emission was measured. The results show that the ML intensity is proportional to the applied pressure.     

A new quadruple therapy for the eradication of Helicobacter pylori. Effect of pretreatment with omeprazole on the cure rate

The aim of the study was to assess the speech discrimination ability of postlingually deaf adults implanted with the Combi 40 cochlear implant and to compare the results with the postoperative data published for other devices. The postoperative open and closed set speech perception performance of 21 consecutive patients was tested using a standardized test battery comprising a number, monosyllable, sentence, consonant and vowel discrimination test as well as a rhyme test in the sound only condition. Mean values achieved for each test 1, 6 and 12 months after "switch on" were evaluated. The results demonstrate that all patients have a substantial benefit from their implant and show a continuous improvement in their speech perception abilities with increased device experience. The mean percentages of correct answers after 12 months were 93.4 for numbers, 44.6 for monosyllables, 78.5 for sentences, 67.6 for the rhyme test, 59.8 for vowel, and 67.3 for consonant discrimination. Preoperatively, the mean discrimination score for monosyllables was 0%. The speech discrimination scores of our patients were similar or higher than described for similar patient groups implanted with other devices. The high stimulation rate of the implant system using the continuous interleaved speech processing strategy as well as a deep atraumatic electrode insertion into the apicalmost regions of the scala tympani may be the reason for good performance.     

The Somatropin Reference Standard (Control 951) of the National Institute of Health Sciences

Somatropin material was examined for preparation of the "Somatropin Reference Standard". The candidate material was evaluated by a domestic collaborative study in which eight laboratories participated. The protein content was determined to be 4.5 mg/Vial based on amino acid analysis. Because of the possibility of application as a chemical reference standard for assay by the HPLC method, a physico-chemical evaluation of the candidate material was also performed. By SE-HPLC, the content of polymer, dimer were determined to be 0.54%, 0.98%, respectively. By RP-HPLC, the early peak area ascribed to desamido and sulfoxide form was 1.07% of the total peak area. And for informational data, the potency of the candidate material, being estimated by three different biological methods, weight gain assay, tibia test and adiposeconversion assay is 14.8 IU/vial. Based on the above results, the candidate was authorized as the Somatropin Reference Standard of the National Institute of Health Sciences.     

High-performance cone beam reconstruction using CUDA compatible GPUs

Compute unified device architecture (CUDA) is a software development platform that allows us to run C-like programs on the nVIDIA graphics processing unit (GPU). This paper presents an acceleration method for cone beam reconstruction using CUDA compatible GPUs. The proposed method accelerates the Feldkamp, Davis, and Kress (FDK) algorithm using three techniques: (1) off-chip memory access reduction for saving the memory bandwidth; (2) loop unrolling for hiding the memory latency; and (3) multithreading for exploiting multiple GPUs. We describe how these techniques can be incorporated into the reconstruction code. We also show an analytical model to understand the reconstruction performance on multi-GPU environments. Experimental results show that the proposed method runs at 83% of the theoretical memory bandwidth, achieving a throughput of 64.3 projections per second (pps) for reconstruction of 512³-voxel volume from 360 512²-pixel projections. This performance is 41% higher than the previous CUDA-based method and is 24 times faster than a CPU-based method optimized by vector intrinsics. Some detailed analyses are also presented to understand how effectively the acceleration techniques increase the reconstruction performance of a naive method. We also demonstrate out-of-core reconstruction for large-scale datasets, up to 1024³-voxel volume.     

Visual simulation of mixed-motion avalanches with interactions between snow layers

In the field of computer graphics, simulation of fluids, including avalanches, is an important research topic. In this paper, we propose a method to simulate a kind of avalanche, mixed-motion avalanche, which is usually large and travels down the slope fast, often resulting in impressive visual effects. The mixed-motion avalanche consists of snow smokes and liquefied snow which form an upper suspension layer and a lower dense-flow layer, respectively. The mixed-motion avalanche travels down the surface of the snow-covered mountain, which is called accumulated snow layer. We simulate a mixed-motion avalanche taking into account these three snow layers. We simulate the suspension layer using a grid-based approach, the dense-flow and accumulated snow layer using a particle-based approach. An important contribution of our method is an interaction model between these snow layers that enables us to obtain the characteristic motions of avalanches, such as the generation of the snow smoke from the head of the avalanche.     

An Algorithm for Minimum Cost Arc-Connectivity Orientations

Given a 2k-edge-connected undirected graph, we consider to find a minimum cost orientation that yields a k-arc-connected directed graph. This minimum cost k-arc-connected orientation problem is a special case of the submodular flow problem. Frank (1982) devised a combinatorial algorithm that solves the problem in O(k ² n ³ m) time, where n and m are the numbers of vertices and edges, respectively. Gabow (1995) improved Frank’s algorithm to run in O(kn ² m) time by introducing a new sophisticated data structure. We describe an algorithm that runs in O(k ³ n ³+kn ² m) time without using sophisticated data structures. In addition, we present an application of the algorithm to find a shortest dijoin in O(n ² m) time, which matches the current best bound.     

Discharge properties and chemical stability of SrZrO films

Abstract— MgO thin film is currently used as a surface protective layer for dielectric materials because MgO has a high resistance during ion sputtering and exhibits effective secondary electron emission. The secondary‐electron‐emission coefficient γ of MgO is high for Ne ions; however, it is low for Xe ions. The Xe content of the discharge gas of PDPs needs to be raised in order to increase the luminous efficiency. Thus, the development of high‐γ materials replacing MgO is required. The discharge properties and chemical surface stability of SrO containing Zr (SrZrO) as the candidate high‐γ protective layer for noble PDPs have been characterized. SrZrO films have superior chemical stability, especially the resistance to carbonation because of the existence of a few adsorption sites due to their amorphous structure. The firing voltage is 60 V lower than that of MgO films for a discharge gas of Ne/Xe = 85/15 at 60 kPa.