阿根廷工艺设计师马塞洛·卢西尼的本土意识

阿根廷首都布宜诺斯艾利斯被称为拉丁美洲的"巴黎",工艺设计师马塞洛·卢西尼的自创品牌airedelsur工作室就在这个美丽的城市。他的设计充分体现了在潘帕平原这片广袤的土地上,众多的民族文化和丰富的艺术气息。运用自己国家的民族特色来进行工艺设计,使设计师马塞洛·卢西尼的创作看起来既生动又独特。他的设计是现代与民族的完美结合,看似简洁大方,其实材料和制作的过程中包含的都是阿根廷本土的民族文化。这种本土文化运用在设计领域的成功案例给处在探索中的当代中国设计师以启发。     

汽车灯用热熔胶的研究及性能表征

介绍了生产汽车灯用热熔胶的各种原料及其在胶粘剂中所起的主要作用，为汽车灯用热熔胶原料的选择提供了参考。还介绍了汽车灯用热熔胶的制备过程和厂家所需的各种性能及其表征方法。通过选择适当的原料及配比，生产出性能优良并具有良好市场前景的产品。     

一种新的S/PDIF接收机数据译码的实现方法

论文分析了S/PDIF音频数据流的特点,引入模式识别中的训练机对S/PDIF音频数据流进行现场脉冲宽度特征提取。依据训练机结果建立分类器实现脉冲宽度分类,根据脉冲宽度进行同步前置码和逻辑电平的解码。利用硬件描述语言Verilog进行设计实现与验证,仿真结果说明这种特征提取方法可以提高S/PDIF接收机数据解译码的适应性和准确性。     

基于B/S的资料信息管理系统的设计和实现

该文介绍了基于B/S资料信息管理系统的设计和开发,重点阐述了资料信息管理系统的开发设计的难点和要点,同时提供了部分数据库表信息和代码。     

含锆介孔材料的研究进展

介绍了目前国内外对介孔氧化锆和含锆介孔二氧化硅材料的研究状况,包括合成介孔氧化锆的2种主要体系水热体系和非水体系,以及在介孔二氧化硅中引入锆的主要方法直接合成法和溶液浸渍法,这2类材料在化学、光学、电子学、电磁学、材料学、环境学等诸多领域具有巨大的潜在应用价值.     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

Preparation of micro-patterned surfaces of Si-N-O films and their influence on adhesion behavior of endothelial cells

Microgrooves were prepared on Si(100) surface by photolithography and wet etching.Subsequently,Si-N-O films were deposited on the microgrooves by unbalanced magnetron sputtering(UBMS) and micro-patterned surfaces of Si-N-O films were obtained.The size of the micropatterns was measured by surface profilometer.The chemical composition of Si-N-O films were characterized by X-ray photoelectron spectrometry(XPS) and the wettability of the micropatterned surfaces was evaluated by contact angle measurement.The beh...     

A novel shaft-less double suction mini pump

A novel double suction shaft-less mini pump was developed for heat control of small energy systems in this study.The mini pump impeller with an exit diameter of 40 mm was combined with the motor rotor supported by the hybrid dynamic bearing.The specific speed of the pump was 125 min-1 m3 min-1 m.The hydraulic performance of the pump was investigated experimen-tally under four rotational speeds.From the test results,it was recognized that the pump could provide a flow discharge of 5 L/min and head of 1.5 m,w...     

Fuel combustion test in constant volume combustion chamber with built-in adaptor

Combustion tests of pre-mixture of methane and air in constant volume combustion chamber(CVCC) have been carried out by means of flame propagation photo and gas pressure measurement,the effects of CVCC body temperature,intake pressure of pre-mixture of methane and air,equivalence ratio and location of the built-in adaptor have been investigated.The whole combustion chamber can be divided into two parts,i.e.the upper combustion chamber and the lower combustion chamber,by the built-in adaptor with through hol...     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...