基于地面传感器的低空目标跟踪算法研究

研究了用地面声阵列传感器进行低空飞行目标跟踪问题。采用了3种类型的关联门,即初始波门、小波门和中波门,使用Kalman滤波算法来实现对方位角的跟踪。充分考虑声音传播的延时,进行传感器的方位角数据匹配,计算目标的位置。通过判断上报方位信息的各传感器是否在同一有效探测范围内,降低了计算量。仿真结果表明,该低空飞行目标数据融合算法是有效的。     

多光谱探测与激光多光谱探测技术的进展

主要介绍了多光谱探测及激光多光谱探测技术的发展及现状,并着重探讨了激光多光谱扫描成像系统的关键技术与发展趋势。鉴于激光多光谱主动探测技术的优势,这项技术将在制导、目标识别、地形匹配及其它激光主动探测领域具有广泛的应用前景。     

基于IDL的激光测高雷达回波时域仿真算法研究

从激光测高雷达回波能量分布模型和地表模型入手,详细介绍了基于IDL的激光测高雷达回波的仿真过程及仿真程序各个模块的功能,用Pearson相关性方法将仿真所得波形与实测回波波形进行了分析比对,二者的相关性系数达到90%以上,并分析了回波脉冲波形随测高系统参数和地表参数的变化情况.该方法可以直观有效地对不同地表的回波进行仿真,为激光测高雷达的回波分析提供了重要的技术手段.     

基于跳频技术的卫星通信干扰分析与比较

简要分析了跳频通信的基本特点和优点，通过计算和比较卫星通信常见的几种干扰方式（宽带噪声干扰、窄带噪声干扰和脉冲干扰）的处理增益和误码率，得出了脉冲干扰对跳频技术下的卫星通信具有较好的干扰效果这一结论，并给出了与理论分析相一致的仿真结果。     

On an Interactive Network Security Measur

The development of the global information highway has brought great impetus and impact to every domain of the world: science, technology, economy and culture as well. Information security of network as an integrated system engineering needs a long period of tackling key problems and planning in such fields as researching and application. The threats to network security can be classified as: hacking, inside attack, computer virus, leak of secret message and modification of key data in network. …     

System Entropy and Its Application in Feature Selection

1　IntroductionFeatureselection ,ideally ,istoselecttheopti malfeaturesubsetfromacandidatesettodescribethetargetconception .Peopleusuallypaymuchat tentiontofeatureselectionbecauseofitspotentialofsimplifyingthestructureofasystem ,speedinguptheprocessofruleinduction ,reducingthecostofinstanceclassificationandimprovingtheperfor manceofthelearnedresults.Theoptimalfeaturesubsetofasystemisusuallymini featurebiased ,i.e.itprefersdescribingasystemwithfeaturesasfewaspossible[1 ] .Unfortunately ,theprob…     

A 5 mW and 5% efficiency 210 GHz InP-based heterostructure barrier varactor quintupler

This letter reviews the design, construction, and measurement of a 210 GHz heterostructure barrier varactor frequency quintupler. The quintupler utilizes planar heterostructure barrier varactors (HBVs) based on the InGaAs/InAlAs/AlAs material system and has produced a measured output power of 5.2 mW with 5.2% conversion efficiency at 210 GHz. This performance is comparable to the state-of-the-art results reported in the literature for HBV frequency triplers operating at millimeter and submillimeter wavelengths.     

Iterative detection/decoding for two-track partial response channels

In this letter, we investigate the iterative detection/decoding algorithms for two-track partial response channels. We first describe the iterative algorithm as an iterative message-passing/processing algorithm over a high-level normal graph and then propose two trellis-based detection algorithms. The natural one is based on a joint trellis, which can be implemented for low-order channels. For moderate-order channels, we propose a separated detection, which is based on two single-track trellises. Compared with the joint detection, the separated detection is simpler in most cases. Simulation results show that, for two-track EPR4 channels with minor intertrack interferences, the separated detection causes only marginal degradation in performance.     

End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.