Preparation of Perovskite-Type Oxides La1-x Srx Fe1-y Coy O3 Using EDTA Sol-Gel Method

Two series of perovskite-type oxides with composition La1-xSrxFeO3 (x≤0.8)and La1-xSrxFe1-yCoyO3( x = 0.2；y = 0.2, 0.4 ) powder productions were synthesized by EDTA complexing sol-gel method. The products were characterized by XRD, TEM, SEM, BET method (N2 adsorption)and laser granularity analysis for different synthesis conditions to obtain the optimum conditions for the preparation process. Single-phased, uniform perovskite-type oxides with small particle size were obtained by EDTA sol-gel process with high stability and repeatability,and the process temperature is much lower than that of solid state reaction method.     

Physical and Electrochemical Properties of Doped LiFePO4 as Cathode Material for Lithium-Ion Batteries

LiFePO4 cathode material was synthesized by a solid-state reaction using doping several elements (Nb5 ,Zr4 ). The starting materials were mixed with a high-efficient sander and treated thermally under flowing N2. The samples were characterized by X-ray diffraction (XRD), field-emission gun electron microscopy (FEG), and their electrochemical performance was investigated in the term of cycling behavior. Room temperature discharge capacity about 140.6 mA·h·g-1 was obtained at C/5 rate.     

Defects tracking matrix for mass customization production based on house of quality

The vision of mass customization has driven a movement toward low volume, high variety mass customization production (MCP) at low price. However, defect identification and defect tracking in such systems are extremely difficult because of the frequent reconfiguration needed by the number of different part types and the interruption of the information flow about quality with each reconfiguration of the system. It is important to quickly rebuild quality information flow with MCP system’s reconfiguration synchronously. This paper introduces a defect tracking method based on Quality Function Deployment for every MCP system module. A defects tracking matrix (DTM) based on the House of Quality directly connects manufacturing technologies with quality defects inside a MCP module. Each MCP reconfiguration requires the DTMs’ rearrangement and DTM-chain is proposed. A dynamic reconstructing algorithm synchronizes the DTM-chain with each MCP reconfiguration. A case study demonstrates the usefulness of the DTM and DTM-chain.

基于组态思想的压缩机组网络工况监测与远程诊断系统开发

提出一种新型的基于组态化思想的压缩机组网络工况监测与远程故障诊断系统。该系统以组态化网络监视与诊断系统管理平台的Web服务器为核心，加上多台工控机和普通计算机组成。用户在远程的浏览器上方便地控制和管理现场工控机，组建网络在线实时监视子系统、数据分析了系统和远程诊断子系统。论述系统的总体方案，现场监视子系统、数据传输管理软件、网络监视与诊断子系统以及系统管理平台的设计，阐述系统组态构建过程、最后给出系统在现场实际应用的例子。     

成型阴极脉冲电化学光整加工在轧辊上的应用

采用成型阴极对冷轧丝杠轧辊进行脉冲电化学光整加工.文章介绍了该方法的基本原理,给出了实验装置,在一定的工艺条件下,对轧辊进行了脉冲电化学光整加工.结果表明,该方法能将轧辊表面粗糙度从0.3μm减小至0.06μm.     

基于Pro/TOOLKIT二次开发的渐开线齿轮参数化设计

利用Pro/E参数化设计功能和二次开发模块Pro/TOOLKIT,在VC 6.0开发环境下对渐开线齿轮进行参数化设计,通过输入主要参数直接生成三维齿轮模型,极大地提高了设计人员的工作效率。     

四种双边铰杆增力气动夹具的技术性能对比

介绍了四种双边铰杆增力气动夹具的结构特点、工作原理,并分析比较了它们的力学及技术性能.     

证明推广的卡诺定理的另一种方法

本文提出了对于推广的卡诺定理的另一种较严密的证明方法,此种证明方法更易于为学生接受,其物理含义更为明确。     

高压三电平变频器的滤波升压系统中能量过渡过程研究

从不同时间尺度上对高压三电平变频器的滤波升压系统进行数学建模，在秒级的时间尺度上主要研究该负载在不同负载稳态运行时的滤波情况，在毫秒级的时间尺度上主要研究故障时从变频切到工频时的电机过渡过程，从微秒级的尺度上研究了负载切换时缓冲吸收电路的能量过渡过程。同时由于变频器向该系统注入了大量的高频分量，为此建立了变压器高频分布模型，以评估变压器分布电容对全系统的影响。实验结果表明了模型和分析方法的有效性。     

抽水蓄能发电电动机电磁设计若干系数计算

本文在深入研究抽水蓄能发电电动机电磁设计若干系数计算原理基础上,建立了数值模型并对ALQUEVA水轮发电机,白莲河、宝泉和广州抽水蓄能发电电动机的相关系数进行了计算,为电机的准确设计提供了条件。文中还提出了在电机主要结构保持不变的情况下,通过调整阻尼条在极靴表面的分布来改善电压波形的方法,从而有效地拓宽了电机的可选槽数。此方法已应用于哈电发电电动机以及常规水轮发电机的设计中。