超高效液相色谱—串联质谱法快速同时检测茶叶中7种香料

基于超高效液相色谱—串联质谱(UHPLC-MS/MS),建立了同时检测茶叶中7种可能非法添加的香料(茴香烯、香豆素、胡椒酚甲醚、指甲花醌、甲基丁香酚、蒲勒酮和反式肉桂醛)的定性、定量方法。茶叶样品经过乙腈—水混合溶剂提取,涡旋振荡,适当稀释并加入无水硫酸钠、十八烷基键合硅胶(C₁₈)和N-丙基乙二胺(PSA)进行净化,涡旋离心后,上清液过膜待测。以Kinetex C₁₈色谱柱分离,在多反应检测扫描(MRM)模式下经MS/MS进行基质外标法定量检测。试验结果表明,7种目标物在0.8~1 600.0 μg/L范围内呈良好线性,线性相关系数(R2)均大于0.999。方法的检出限为0.02~0.03 mg/kg,定量限为0.05~0.10 mg/kg,平均回收率为82.5%~102.5%,日内、日间精密度分别小于16%和18%。该方法快速、可靠、灵敏度高,用于检测市面流通的100个茶叶样品,结果检出了反式茴香脑、香豆素和胡椒酚甲醚等物质,最大浓度值分别为65.0,2.0,72.2 mg/kg。     

Formation of a protective layer against corrosion on Mg alloy via alkali pretreatment followed by vanillic acid treatment

Although Mg alloy possesses high specific strength, low density, and good biocompatibility, poor corrosion resistance hinders its further applications. In the present study, an innovative protective layer against corrosion was prepared on the AZ31 Mg alloy via alkali pretreatment followed by vanillic acid treatment. The alkali pretreatment supplied –OH for the AZ31 Mg alloy surface to react with vanillic acid. The vanillic acid treatment played a crucial role in enhancing the corrosion resistance due to the excellent ability to act as a barrier and retard aqueous solution penetration, which effectively isolated the underlying Mg alloy from the corrosive environment. The corrosion current density of alkali and vanillic acid-treated Mg alloy (AZ31V) almost showed two orders of magnitude lower values in comparison with that of the AZ31 Mg alloy, and the corrosion potential of AZ31V Mg alloy increased from −1.41 to −1.25 V. The immersion tests proved that there was no occurrence of severe corrosion. Hence, the alkali pretreatment and vanillic acid treatment may represent a promising method to improve the corrosion resistance of Mg alloy.     

Tensor Q-rank: new data dependent definition of tensor rank

Machine Learning - Recently, the $${ Tensor}~{ Nuclear}~{ Norm}~{ (TNN)}$$ regularization based on t-SVD has been widely used in various low tubal-rank tensor recovery tasks. However, these models...     

基于注意力机制与文本信息的用户关系抽取

随着社交媒体的发展,用户之间的关系网络对于社交媒体的分析有很大的帮助。因此,该文主要研究用户好友关系检测。以往的关于用户好友关系抽取的研究主要基于社交媒体上的结构化信息,比如其他好友关系,用户的不同属性等。但是,很多时候用户本身并没有大量的好友信息存在,同时也不一定有很多确定的属性。因此,我们希望基于用户发表的文本信息来对用户关系进行预测。不同于以往的潜在好友推荐算法,该文提出了一种基于注意力机制以及长短时记忆网络(long short-term memory,LSTM)的好友关系预测模型,将好友之间的评论分开处理,通过分析用户之间的评论来判断是否具备一定的好友关系。该模型将好友双方信息拼接后的结果作为输入,并将注意力机制应用于LSTM的输出。实验表明,用户之间的评论对于好友关系预测确实有较大的实际意义,该文提出的模型较之于多个基准系统的效果,取得了明显的提升。在不加入任何其它非文本特征的情况下,实验结果的准确率达到了77%。     

Transformation of the reabsorption characteristics of lignite treated by low and high temperature drying process

Abstract

The reabsorption characteristics of the lignite treated by low and high temperature drying process were addressed in the paper. The information about the moisture form, functional groups, effective water-filled porosities and equilibrium moisture content of the lignite before and after the drying process was investigated using Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and a self-made reabsorption device, respectively. The results show that the low drying temperature (140, 190, 230?°C, 10?min, N₂) has little impact on the effective water-filled porosities of the resulted samples, whereas it has a great influence on the main oxygen-containing functional groups, which amount firstly decreases and then increases with the drying temperature increasing. In the case of the lignite samples dried under high-temperature (600, 700, 800?°C, 30?s, N₂), the amount of the effective water-filled porosity of the sample decreases and the amount of oxygen-containing functional groups increases as the temperature increasing. The reabsorption capability of the high temperature dried sample is much lower than that of the sample treated under low drying temperature. The reabsorption characteristics of the low-temperature dried samples are affected by the amount of the oxygen-containing functional groups, while the effective water-filled porosity is main factor for the lignite samples derived from high temperature drying process. Moreover, the work gives a good evidence that the high-temperature drying process is an effective choose for lignite upgrading.     

面向消费类电子产品的自动化生产线成组技术

针对现代消费类电子产品快速更新换代的现状, 介绍了该类产品的自动化生产线成组技术,阐述了通过度量消费类电子产品相似性和派生性特征,对产线进行成组编码的原理,研究产线工位单元的建模方法,描述了建模内容,并通过有无装载板的产线结构,论述了产线成组编码集成的途径和方法.     

现场总线在冶炼烟气制酸系统中的应用实践

分析了冶炼烟气制酸工艺的特点，介绍了由PROFIBUS-DP现场总线构建的冶炼厂烟气制酸监控系统，详细介绍了其硬件配置及相应的软件设计。     

基于CVSD编码的无线语音系统方案的设计

简要介绍了连续可变斜率增量(CVSD)调制的原理。与目前应用较为广泛的其它语音编码方式相比较,CVSD拥有更优的数字特性。着重介绍了由CML公司研制开发的基于CVSD的语音编码芯片———CMX649的特点及相关的应用方式。CMX649能够成功地应用在广泛的语音编码系统中,尤其适合无线语音系统应用。在此基础上,给出了一种实用性很强的低成本、低功耗无线语音系统的设计与应用方案。该方案可提供清晰可靠的语音传输,可广泛应用于农村地区,具有广阔的市场空间。     

二极管侧面抽运薄片激光器耦合系统研究

设计了二极管侧面抽运Nd:YAG薄片激光器,耦合系统由消像差透镜组和空心光波导组成,对二极管快轴和慢轴方向的抽运光进行压缩和均匀化.采用光线追迹法,同时考虑二极管在快轴和慢轴方向的发散特性及薄片侧面的散射特性,模拟并分析了光线在耦合系统内的传输和薄片内抽运光分布的规律.模拟结果表明耦合系统具有98.1%的耦合效率,同时薄片内具有理想的抽运光分布.