荧光染料用于涤纶织物染色的荧光性能研究

在实验条件下，染色织物的荧光反射率随荧光染料的浓度增加而增加，超过一定浓度后，有下降趋势；在pH=5左右，荧光反射率最高；荧光增白剂会提高染色织物的荧光反射率，在荧光黄2GFL中，当荧光增白剂的浓度由0.1％增加到5％时，荧光反射率由8．43增加至18．59，而对非荧光染料只有增艳的作用，不产生荧光。荧光染料染色织物的荧光反射率随着加入非荧光染料量的增加而减弱。     

酸增殖源及其在化学增幅抗蚀剂体系中的应用

介绍了酸增殖机理、酸增殖源的种类、典型化合物在化学增幅抗蚀剂体系中的应用及对灵敏度的提高 ,提出在计算机直接制版版材研究中的应用     

F离子掺杂TiO2的性能研究

以NH4F为掺杂剂，采用溶胶-凝胶法制备F离子掺杂型TiO2光催化剂，对其进行XRD、XPS和PL表征，结果表明，F离子掺杂ToO2由于Ti—F配位体的形成而能抑制金红石相的生成，同时F离子掺杂能增加TiO2表面缺陷浓度并降低Ti2P键的结合能，另外，由于F离子能取代Ti—OH配位体而降低了表面羟基氧浓度．光催化研究结果表明，F离子掺杂提高了TiO2光催化活性近1．5倍．     

棉籽油间歇式酯交换反应动力学的研究

生物柴油(棉籽油甲酯)可以由棉籽油与甲醇在催化剂KOH存在下通过酯交换反应制得。故对棉籽油间歇式酯交换反应动力学进行了研究,并考察了反应温度和催化剂浓度对产物棉籽油甲酯浓度的影响。用液相色谱法分析棉籽油的组成;用气相色谱法分析产物中棉籽油甲酯的含量。由实验数据绘制的动力学曲线得到酯交换反应在开始阶段为准二级反应,以后紧接转为一级反应和零级反应,与文献报导的棕榈油酯交换反应动力学结果一致。由实验数据求出酯交换反应在开始阶段的动力学参数,35℃、45℃时的反应速率常数分别为0.9179Lmol-1min-1和1.049Lmol-1min-1,酯交换反应的活化能为10.88kJmol-1。根据实验结果得到棉籽油酯交换反应的最佳反应温度为45℃,最佳催化剂为1.1%KOH。     

压缩机废油回收工艺小结

介绍了压缩机废油回收的原理、工艺及操作要点,达到了节油降耗的目的。     

改性膨润土对甲基橙的吸附

在用Cu^2 A‘^3 Fe^3 对膨润土改性中，Fe^3 改性的膨润土对甲基橙的吸附性能最好，在振荡20分钟后即可达到吸附平衡。pH=3～7、用量为3g／L、25℃时对甲基橙的吸附量达到最大，在pH=7及常温条件下，铁基膨润土的用量为11g／L时，对浓度为250mg／L甲基橙的吸附量和去除率分别为22.2mg／g98．6％；对浓度为40mg／L的甲基橙去除率达97.1％。     

Image Mosaic Techniques OptimizationUsing Wavelet

This essay concentrates on two key procedures of image mosaic--image registration and imagefusion.Becauseof the character of geometric transformation invariance of edge points, wecalculate the angle difference of the direction vector ofedge points in different images anddraw an angle difference histogramto adjust the rotationproblem. Through this way, algorithm based on gray information is expandedandcan be used in images withdisplacementand rotation. Inthe term of image fusion, wavelet multi-scale analysis is used to fuse spliced images. In order to choose the best method of imagefusion,weevaluate the results of different methods of image fusion by cross entropy.     

广西产迷迭香挥发油化学成分的分析

水蒸气蒸馏法提取广西百色地区迷迭香茎、叶中的挥发油,利用GC-MS联用仪进行了分析。共分离出36个峰,鉴定了其中31个化学成分,占总含量的97.08%。其主要成分为1,8-桉叶素、α-蒎烯、樟脑、莰烯、α-松油醇、乙酸龙脑酯及龙脑等。     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.