Controlled Secure Direct Communication Protocol via the Three-Qubit Partially Entangled Set of States

In this paper, we first re-examine the previous protocol of controlled quantum secure direct communication of Zhang et al.’s scheme, which was found insecure under two kinds of attacks, fake entangled particles attack and disentanglement attack. Then, by changing the party of the preparation of cluster states and using unitary operations, we present an improved protocol which can avoid these two kinds of attacks. Moreover, the protocol is proposed using the three-qubit partially entangled set of states. It is more efficient by only using three particles rather than four or even more to transmit one bit secret information. Given our using state is much easier to prepare for multiqubit states and our protocol needs less measurement resource, it makes this protocol more convenient from an applied point of view.     

Data sharing mechanism of various mineral resources based on blockchain

Basins with various mineral resources coexisting and enriching often occupy an important strategic position. The exploration of various mineral resources is repetitive at present due to unshared data and imperfect management mechanism. This situation greatly increases the cost of energy exploitation in the country. Traditional data-sharing mode has several disadvantages, such as high cost, difficulty in confirming the right of data, and lack of incentive mechanism, which make achieving real data sharing difficult. In this paper, we propose a data-sharing mechanism based on blockchain and provide implementation suggestions and technical key points. Compared with traditional data-sharing methods, the proposed data-sharing mechanism can realize data sharing, ensure data quality, and protect intellectual property. Moreover, key points in the construction are stated in the case study section to verify the feasibility of the data-sharing system based on blockchain proposed in this paper.     

基于ABAQUS的显式动力学分析方法研究

显式动力学(The Explicit Dynamic)是针对隐式求解器的一个补充,其分析方法对于求解广泛、各类非线性结构力学问题是一个非常有效的工具,显式方法中的单个增量步取决于模型的最高固有频率,与持续时间、载荷类型无关。ABAQUS/Explicit主要用于碰撞、接触以及失效分析。探讨了ABAQUS显式动力学的基本理论、求解的问题,对显示动力学分析方法中的求解算法、稳定时间极限和能量平衡问题进行研究,给出了显示动力学分析的一般性分析方法。通过案例验证了该方法的可行性,应用该方法可有效解决实际工业生产中的碰撞问题、复杂的接触问题以及复杂的后屈曲问题,可为显式动力学分析方法应用于工程实践奠定理论与方法基础。     

Research on the identification performance of UHF RFID system considering the correlation of cascaded channel

The identification rate of UHF RFID system was restricted by multipath propagation effects.The system identification performance was studied considering the correlation coefficient between forward and reverse channels.Based on the generalized Rician fading channel model,the analytical expression of identification rate was derived under independent,full correlation and correlation cases.Compared with the existing analysis,the proposed uniform calculation formula of identification rate was for any correlation coefficient and kinds of channel conditions.The numerical computation and Monte-carlo simulations show that the influences of different correlation coefficients,channel conditions,sensitivity and distance on the identification rate.     

基于光纤技术的采空区发火监测系统的应用

基于光纤技术的采空区发火监测系统由传感器、数据传输、数据分析与控制三大部分构成,研发新一代适合煤矿安全领域应用的先进传感器、并以此为基础构建新型煤矿安全灾害监测预警系统,对于实现煤矿安全发展具有十分重要的意义。     

A method for rapidly evaluating reliability and predicting remaining useful life using two-dimensional convolutional neural network with signal conversion

Journal of Mechanical Science and Technology - Real-time monitoring and rapid evaluation of bearing operating conditions, especially for the reliability evaluation and remaining useful life (RUL)...     

A computer aided design method for car form and its application based on shape parameters

In the early design stage, automotive modeling should both meet the requirements of aesthetics and engineering. Therefore, a vehicle CAD (computer aided design) model that can be easily adjusted by feedbacks is necessary. Based on CE-Bézier surface, this paper presents a set of algorithms for parametric segmentation and fairing surface generation in a car model. This model is defined by a simplified automotive template and relevant control points, shape parameters and segmentation parameters, which can be modified to alter the car form efficiently. With this model and the corresponding adjustment method, more than fifty various vehicle models are established in this research according to different parameters. And two methods for calculating similarity index between car models are constructed, which are suitable for brand design trend analysis and modelling design decisionmaking.     

LTE系统多小区上行联合功控算法

针对传统的小区内开环功率控制算法通常以提升本小区的吞吐量性能为目标，忽略了当前小区用户对邻小区用户同频干扰的问题，为提升边缘用户性能的同时兼顾系统整体性能，提出了一种LTE系统小区间上行联合功率控制（UJPC）算法。该算法采用单基站三扇区为系统模型，以最优化系统吞吐量比例公平函数为目标，首先根据最小信干噪比（SINR）约束值和用户最大发射功率这两个约束条件得到相应的数学优化模型，然后采用连续凸近似的方法求解优化问题得出各个基站所管辖的小区内所有用户的最优发射功率。仿真结果表明，与基准的开环功控方案相比，联合功控方案在保证系统平均频谱利用率的情况下能够较大幅度地提高小区边缘频谱利用率，其最佳性能增益能达到50%。     

人纤维蛋白原对急诊外伤致创伤性凝血病疗效及相关因素分析

目的:探讨人纤维蛋白原(fibrinogen，FIB)对急诊创伤性凝血病患者的临床疗效及相关因素。方法:将2015年6月至2018年6月本院收治的100例严重创伤患者纳入本研究，根据是否创伤性凝血病分为凝血病组(80例)和非凝血病组(20例)。比较凝血病组和非凝血病组患者收住后第1个24 h的急性生理和慢性健康评分(acute physiology and chronic health evaluation II，APACHE II)、创伤严重程度评分(injury severity score，ISS)、低体温及低灌注发生率等指标。采用Logistic多因素回归方法分析严重创伤患者发生创伤性凝血病的相关因素。将80例创伤性凝血病患者随机分为观察组(40例)和对照组(40例)。对照组按照常规诊疗措施治疗，观察组在对照组处理基础上给予人FIB，比较治疗前后观察组和对照组的凝血功能指标，及治疗后的临床用血量、住院时间及病死率。结果:与治疗前相比，治疗后观察组和对照组的凝血酶原时间(prothrombin time，PT)、活化部分凝血活酶时间(activated partial thromboplastin time，APTT)及D-二聚体水平降低(P<0.05)，FIB水平明显升高(P<0.05)。观察组的红细胞(red blood cell，RBC) 输注量、新鲜冰冻血浆(fresh frozen plasma，FFP)输注量、重症加强护理病房(intensive care unit，ICU)时间及病死率均明显低于对照组，差异具有统计学意义(P<0.05)。创伤性凝血病患者PT>18 s(r=0.623，P=0.024)、APTT>60 s(r=0.722，P=0.018)、凝血酶时间(thrombin time，TT)>15 s(r=0.719，P=0.033)与ISS评分呈正相关。碱缺失(base deficit，BD)≥6(OR=3.678，95%CI=1.065～9.417)、格拉斯哥评分(Glasgow coma scale，GCS)≤8(OR=5.299，95%CI=1.122～8.711)和血小板(platelet，PLT)计数(OR=0.982，95%CI=0.971～0.996)是严重创伤患者发生创伤性凝血病的独立预测因素。结论:人FIB可有效改善创伤性凝血病患者的凝血功能，降低病死率、缩短ICU时间，创伤性凝血病与创伤严重程度、合并休克、低体温和重型颅脑损伤存在一定的相关性。     

5-二茂铁基噁唑的合成研究

以二茂铁甲醛和对甲苯磺酰基异氰(TOSMIC)为原料,经过Van Leusen反应,一步合成目标化合物5-二茂铁基噁唑,通过~1HNMR、~(13)CNMR和ESI-MS对其结构进行表征,并对影响收率的主要因素进行考察。结果表明,在物料比n(TOSMIC)∶n(二茂铁甲醛)为1.1∶1、反应溶剂为甲醇、K_2CO_3用量即n(K_2CO_3)∶n(二茂铁甲醛)为2.0∶1、反应温度为65℃、反应时间为8 h的最佳条件下,目标化合物收率达到74.7%。该方法具有原料廉价易得、反应操作简单、收率高等优点,具有一定的应用价值。