Parametric Stabilization of Quantized Interconnected Systems with Application to Coupled Inverted Pendulums

This paper studies the analysis of parametric stability and decentralized state feedback control of a kind of quantized interconnected systems. The output of each controller is quantized logarithmically before it is input to the subsystem, and the quantized density would affect the stability of the systems. First, a decentralized state feedback controller is designed for interconnected systems without quantization and the corresponding stable region is obtained. Second, for a given controller, the lower bound of the quantization density is evaluated from parameters of local controllers. Finally, the proposed method is applied to coupled inverted pendulums systems which can be viewed as quantized interconnected systems. The simulation results show that by using the proposed quantized controllers, the interconnected inverted pendulum systems are parametrically stabilized.     

Experimental study of a novel hybrid constructed wetland for water reuse and its application in Southern China

A new type of hybrid constructed wetland (CW), consisting of both vertical-baffled flow wetland (VBFW) and horizontal subsurface flow wetland (HSFW), has been deployed in Southern China to naturally accelerate the removal of organic matter and nitrogen. The hybrid CW system is characterised by a combination of continuous baffled flow vertical wetland and 'S' pattern horizontal subsurface flow wetland with natural aeration ditches to increase the concentration of dissolved oxygen in the HSFW bed. An internal circulatory system from the HSFW effluent back to the VBFW may optionally be operated to enhance the biological denitrification effect. Cyperus alternifolius is the main macrophyte in the wetland bed. The performance of the hybrid CW was studied with a pilot-scale system and three full-scale systems for municipal sewage treatment in Southern China. The results suggest that this new hybrid CW can achieve removal efficiencies of chemical oxygen demand, suspended solids, ammonia nitrogen, total nitrogen, and total phosphorus of better than 83.6, 95.0, 71.7, 64.5 and 68.1% respectively, with a specific wetland bed area of 0.70-0.93 m(2) PE(-1). The mean effluent concentrations of these parameters would meet the regulatory discharge limits for wastewater treatment systems (GB18918, 2002) and reuse in the context of agricultural irrigation solutions in China.     

可重构阵列自主容错方法研究

设计了一种具有故障自诊断和自修复能力的可重构阵列单元结构。在功能细胞单元内部实现分布式的故障自诊断,在测试到故障后,可以自主地将距故障单元最近的空闲单元进行替换,接着自动取消受故障影响的线网,并在新的布线端点间对这些线网重新布线。以4位并行乘法器为例,实验结果证明了可重构单元阵列的故障自修复能力,并验证其重构时间较短且可靠性较高。     

扫描型红外图像实时目标检测研究

针对扫描型红外图像数据量大、背景复杂、横纹杂波干扰大和目标图像信噪比低等特点,提出一种适用于360°全方位扫描型红外图像目标检测的实时处理算法。算法预处理部分消除横纹杂波,实现目标增强和背景抑制;然后采用两级特征提取,大幅降低图像的数据量;最后根据帧间图像灰度特征相关的思想,完成扫描型红外图像目标检测的功能。根据本文算法的特点,以DSP+FPGA为核心处理器设计了具有实时处理能力强,数据传输容量大等优点的图像处理板。实验结果表明,本文算法是有效、可行的,图像处理板稳定、可靠,能满足扫描型红外图像实时目标检测的需求。     

Optimal models for single-period supply chain problems with fuzzy demand

The aim of this paper is to develop an optimal technique for dealing with the fuzziness aspect of demand uncertainties. Triangular fuzzy numbers are used to model external demand, and decision models in both non-coordination and coordination situations are constructed. It is shown that in the decision models there exists a unique solution that can be expressed analytically. Based on the closed form solutions for both models, the behaviors and relationships of both the manufacturer and the retailer are quantitatively analyzed, and a cooperative policy for the optimization of the whole supply chain is put forward.     

DELPHI实现招生电话语音应答系统

介绍了DELPHI实现板卡式招生电话语音应答系统的方法,并详细描述动态链接库的导入、自动语音应答功能模块和语音应答流程方案编辑模块的实现过程。该系统经过应用,证明效率高,性价比高,具有一定的可推广性。     

最小通路法在通信保密装备可靠性建模中的应用

针对通信保密装备可靠性建模难度大的问题,提出了一种新的适用于复杂系统的可靠性建模方法一最小通路法。通过在系统拓扑结构图上搜索出所有能够使系统正常工作的最小通路,建立系统的可靠性模型。该方法基于广义的网络拓扑结构,因此网络的源节点和目标节点不必局限于严格的定义,可以随意指定,具有很大的灵活性。实例证明,该方法可行有效。     

AES中字节代换和列混合的硬件可逆设计

针对AES硬件实现占用大量资源的缺点,对其两个核心计算部件(字节代换和列混合)进行了硬件可逆设计.该设计采用模块复用技术,使字节代换及其逆变换模块最大限度地共享GF(2<'8>)域中的模逆运算单元,而使列混合及其逆变换模块最大限度地共享p(x)乘运算单元,以较小的硬件代价实现了字节代换模块和列混合模块的硬件可逆设计.最后在Xilinx的FPGAVirtexE xev2000e-6上进行了仿真验证,实验结果表明,与其他同类设计相比,新设计方案明显减少了硬件开销.     

Field-Induced Multiscale Polarization Configuration Transitions of Mesentropic Lead-Free Piezoceramics Achieving Giant Energy Harvesting Performance

The development of high-performance (K,Na)NbO₃ (KNN)-based lead-free piezoceramics for next-generation electronic devices is crucial for achieving environmentally sustainable society. However, despite recent improvements in piezoelectric coefficients, correlating their properties to underlying multiscale structures remains a key issue for high-performance KNN-based ceramics with complex phase boundaries. Here, this study proposes a medium-entropy strategy to design “local polymorphic distortion” in conjunction with the construction of uniformly oversize grains in the newly developed KNN solid-solution, resulting in a novel large-size hierarchical domain architecture (≈0.7 µm wide). Such a structure not only facilitates polarization rotation but also ensures a large residual polarization, which significantly improves the piezoelectricity (≈3.2 times) and obtains a giant energy harvesting performance (W_out = 2.44 mW, P_D = 35.32 µW mm⁻³, outperforming most lead-free piezoceramics). This study confirms the coexistence of multiphase through the atomic-resolution polarization features and analyzes the domain/phase transition mechanisms using in situ electric field structural characterizations, revealing that the electric field induces highly effective multiscale polarization configuration transitions based on T–O–R sequential phase transitions. This study demonstrates a new strategy for designing high-performance piezoceramics and facilitates the development of lead-free piezoceramic materials in energy harvesting applications.