Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

航空齿轮表面硬化层断裂性能研究

按照航空齿轮的具体工艺过程，对材料12Cr2Ni4A的拉伸试样和断裂试样进行设计和加工，通过三点弯曲实验，重点研究了齿轮材料硬化层的硬度分布，硬化试样拉伸力学性能参数和断裂性能参数，实验结果表明，所采用试样的加工工艺方案是可行的，所获得的Kc基本反映我国航空硬化齿轮材料的断裂性能特征，为定量预测航空硬化齿轮疲劳寿命提供实验和理论分析的依据。     

无约束淬火机目标温度神经网络预报

淬火、控制冷却的冷却速度和目标温度是关系到钢板性能的关键因素 ,但由于冷却过程的水量、水温、辊道速度等对冷却目标温度的影响属多变量非线性过程 ,用简单的解析模型通常精度较低 ,难以达到精确控制的要求。采用人工神经网络技术对无约束淬火机目标温度进行快速预报 ,结果表明 ,预测精度高 ,快速准确     

影响凹印铜金粉印金光泽度的主要因素

在研究国内外铜金粉的微观形貌、厚度、水面遮盖率、定向排列、光泽度和粒度分布的基础上，分析了影响凹印铜金粉印金光泽度的主要因素。结果表明，国产铜金粉颗粒级差大、细小颗粒所占比例过多、金属片太厚、水面遮盖率小、定向排列不好等是影响国产铜金粉印金光泽度的主要因素。     

接触传热表面粗糙度曲线的统计特征

测量了一般机械加工表面的轮廓曲线，基于小波变换提取了粗糙度曲线，分析了轮廓高度和接触峰高度的统计分布特征。研究结果表明，轮廓高度不服从严格的正态分布，但具有一定的正态性，而接触峰高度的统计特征与其评定标准有直接的关系。因此，对于接触热阻的计算模型来说，接触点数的计算应以合理选取接触峰的评定标准为前提。     

灰色系统优势分析模型

本文首先在文[1]的基础上给出了“关联矩阵的行列完全可比性”概念,指出了此情况下作优势分析应注意的问题;根据文[1]优势分析的思想及定义,给出了系统最优序列、准最优序列的完善定义,进而改进了关联度定义,论证了在此义下“行列完全可此性”定理,为作优势分析提供了方便方法。     

KINETICS OF HYDROCARBON GAS GENERATION FROM MARINE KEROGEN AND OIL: IMPLICATIONS FOR THE ORIGIN OF NATURAL GASES IN THE HETIANHE GASFIELD, TARIM BASIN, NW CHINA

In this paper we derive kinetic parameters for the generation of gaseous hydrocarbons (C_1‐5) and methane (C₁) from closed‐system laboratory pyrolysis of selected samples of marine kerogen and oil from the SW Tarim Basin. The activation energy distributions for the generation of both C_1‐5 (Ea = 59‐72kcal, A = 1.0×10¹⁴ s^?1) and C₁ (Ea = 61‐78kcal, A = 6.06×10¹⁴ s^?1) hydrocarbons from the marine oil are narrower than those for the generation of these hydrocarbons from marine kerogen (Ea = 50‐74kcal, A = 1.0×10¹⁴ s^?1 for C_1‐5; and Ea = 48‐72kcal, A=3.9×10¹³ s^?1 for C₁, respectively). Using these kinetic parameters, both the yields and timings of C_1‐5 and C₁ hydrocarbons generated from Cambrian source rocks and from in‐reservoir cracking of oil in Ordovician strata were predicted for selected wells along a north‐south profile in the SW of the basin. Thermodynamic conditions for the cracking of oil and kerogen were modelled within the context of the geological framework. It is suggested that marine kerogen began to crack at temperatures of around 120°C (or 0.8 %Ro) and entered the gas window at 138°C (or 1.05 %Ro); whereas the marine oil began to crack at about 140 °C (or 1.1 %Ro) and entered the gas window at 158 °C (or 1.6%Ro). The main geological controls identified for gas accumulations in the Bachu Arch (Southwest Depression, SW Tarim Basin) include the remaining gas potential following Caledonian uplift; oil trapping and preservation in basal Ordovician strata; the extent of breaching of Ordovician reservoirs; and whether reservoir burial depths are sufficiently deep for oil cracking to have occurred. In the Maigaiti Slope and Southwest Depression, the timing of gas generation was later than that in the Bachu Arch, with much higher yields and generation rates, and hence better prospects for gas exploration. It appears from the gas generation kinetics that the primary source for the gases in the Hetianhe gasfield was the Southwest Depression.     

DG抗高温隔离液在古深1井的应用

古深1井是大庆油田在古龙地区的一口风险探井,设计井深5 500 m,实际完钻井深为4 739 m。钻进过程中,多次出现塌、漏、卡等事故,造成井径不规则。为平衡压力,压稳地层,更好地隔离钻井液和水泥浆,提高顶替效率,设计采用DG抗高温隔离液。DG抗高温隔离液抗高温可达150℃,密度调节范围宽,抗高温悬浮稳定性好,失水量少,与水泥浆和钻井液相容性好。古深1井采用双级注水泥工艺,固井施工过程十分顺利,隔离液密度均匀,泵送容易,无发泡现象。从声幅测井情况来看,水泥面上部与隔离液交界处界面清楚,水泥环胶结良好,水泥返高达到了设计要求,混浆过渡段短,固井质量合格。     

非自喷井压力恢复测试方法探讨

介绍了地层测试与抽汲、测恢复联作的设计方法和作业过程，选择了两口典型井，进行了作业过程回顾和成果分析。该技术在改造措施前后均可进行，均可测得满意的压力恢复曲线。     

Influence of ZnO and P2O5 Content on Modified HZSM-5 on Aromatization of FCC Gasoline

Catalytic properties of different content of ZnO and P₂O₅ supported on HZSM-5 zeolites were studied in the conversion of FCC gasoline (75°C-120°C) into aromatic hydrocarbons with a temperature of 430°C, a liquid hourly space velocity of 1.0 hr^-1, and a pressure of 0.1 MPa. In the reaction, when the contents of ZnO and P₂O₅ are 2% and 4%, respectively, Zn-P/HZSM-5 showed the highest selectivity and activity to aromatic hydrocarbons and conversion of olefins. The content of aromatics in the liquid product and the yield of aromatics reached as high as 94.53%, 68.87%, and 51.74%, respectively.