舰艇电子战综合对抗系统应用探讨

通过对现代海上电子战特点深刻探讨。分析了现代海战条件对舰船电子战对抗能力需求。并对现代舰船电子战综合对抗系统所采用的新技术情况进行探讨。     

Surfactant behavior and its influence on the viscosity of associative thickeners solutions, thickened latex dispersions, and waterborne latex coatings

Surfactants, varying in their chemical composition and hydrophobic behavior, are used in the formulation of a waterborne coating. These differences influence their aggregation in micellar structures, their interaction with associative thickeners, and in particular, the synergies present in their competitive adsorptions on the disperse phases in a waterborne coating. Adsorption of HEUR thickeners on latexes and the ability of surfactants to displace them from those surfaces is an important variable in the dispersion’s viscosity. With large particle latexes, viscosity increases arise primarily from the network built through the interaction of HEURs with surfactants in the aqueous phase. Fluorescence is used to verify the mechanism by which surfactants enhance associative thickener viscosities. That is best achieved with nonionic surfactants, because of their synergies with large hydrophobe HEURs at low concentration. With decreasing latex particle size the adsorbed species is an important contributor to the dispersion’s viscosity through its contribution to the latex’s effective volume fraction increase and when the size of the adsorbed HEUR is matched to the separation distances of the latex at 0.25 volume fraction. Achieving controlled shear-thinning behavior in small particle size latex paints with the economic constraints on the amount of HEUR required to obtain 90 KU viscosities are discussed. Presented at the 80th Annual Meeting of the Federation of Societies for Coatings Technology, October 30–November 1, 2002, in New Orleans, LA. Polymer and Coatings Dept., Fargo, ND 58103.     

Effect of thermal treatment on ZnO substrate for epitaxial growth

ZnO is a highly efficient photon emitter, and has optical and piezoelectric properties that are attractive for a variety of applications in sensors and potentially optoelectronic devices such as emitters. Due to its identical stacking order and close lattice match to GaN, it is also being developed as a substrate material for GaN epitaxy. However, the surface finish of the ZnO is such that much of the damage induced by sawing and follow up mechanical polishing remains. We developed a thermal treatment method to eliminate surface damage on the 0 face of ZnO (0 0 0 1) to prepare it for epitaxial growth. Atomic force microscopy images of ZnO (0 0 0 1) annealed at 1050 °C for 3 h etc. show that residual scratches from mechanical polishing are removed and atomically flat, terrace-like surfaces are attained. In addition, low-temperature photoluminescence and high-resolution X-ray diffraction measurements have been employed to investigate the effect of annealing on ZnO substrates.     

大块式动力基础的振动分析与加固处理

根据一大块式曲柄连杆机构的机器钢筋混凝土基础的振动测试与振动分析 ,诊断了基础发生工程事故的原因 ,并结合工程特点 ,在不改变基础设计的动力参数的情况下 ,确定了灌浆加固处理方法 ,并介绍了灌浆加固处理的效果。     

Compact broadband photonic crystal filters with reduced back-reflections for monolithic InP-based photonic integrated circuits

A photonic crystal grating filter with an extremely wide rejection band and reduced modal back-reflections is proposed and demonstrated with a stopband extinction of 20 dB and insertion loss of less than 5 dB. The reflection-mitigation technique is shown to provide 10-15-dB reduction in reflected power. Guidelines for performance improvement are presented.     

稀土元素的分离技术

对目前稀土元素分离过程中几种常用的分离技术进行了综述，使用得较多的仍然是溶剂萃取法和离子交换法，而且新方法也在不断地出现。     

空心微珠改性硬质聚氯乙烯复合材料的应用研究

经过改性的超细空心微珠可以作为填料加入到硬质聚氯乙烯（PVC－U）树脂中，同时改善PVC树脂的流变性、冲击性能和刚性等性能。研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。而超细空民微珠加入到硬质PVC板材时，可以提高PVC硬板的冲击性能，减小制品的收缩率，赋予PVC硬板优异的耐腐蚀性能，且产品的各项性能均符合PVC板材国家标准GB／T4454－96。     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

甲醇制烯烃技术进展

阐述了甲醇制低碳烯烃各个工艺的研究进展,从甲醇制乙烯、甲醇制丙烯和甲醇制丁烯三个方面对比了各自技术特点,指出未来需开发出以丙烯、 C₄烯烃为主产品的新技术。     

TiB2和SiCW对Al2O3陶瓷材料高温摩擦磨损特性的影响

研究了Ａｌ２Ｏ３、Ａｌ２ｏ３／ＴｉＢ２和Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ三处陶瓷材料在不同条件下的擦靡损特性。结果表明：三种陶瓷材料与硬质合金摩擦副的摩擦系数随温度温度的增加有不同的变化规律，摩擦表面的Ｘ射线衍射分析表明，摩擦系数的变化与陶瓷物膜的和结构有关，在高温下Ａｌ２Ｏ３／ＴｉＢ２陶瓷材料摩擦表面形成了具有优良的高温润性的ＴｉＯ２氧化膜，因而ＴｉＢ２的加入明显改善了Ａｌ２Ｏ３陶瓷材料 摩擦磨损