带式输送机系统的设计与设备选型(一)

1通用带式输送机技术的发展情况 带式输送机与其他运输方式相比具有运距长，能力大，投资省，运费低，操作简单安全，管理维修容易，能耗低，污染小等优势而逐渐成为各行业物料搬运的主要手段。高强度的钢绳芯带式输送机因其为矿山开采和矿石输送工艺创造了十分有利的条件而在各种矿山外部输送中得到快速发展。近年来随着水泥厂规模迅速扩大，带式输送在水泥行业已成为矿石原料输送的首选方案。     

粉尘含碳球团还原方式及气氛对其还原挥发性能的影响

在1150℃和1250℃、0．1L／min和10L／min的气量下，对通人含不同CO2量的氮气影响粉尘含碳球团还原速度的实验研究表明：以滚动方式所造球团中，氧化物的还原完全以间接还原的方式进行，气氛中非还原气体流速（或流量）的增加对粉尘含碳球团氧化铁还原速度有显著的降低作用，但还原温度提高则对气量增加造成的氧化铁还原速度降低有显著的抵消作用．气氛对球团中锌的挥发速度影响很小，对铅的挥发速度几乎不产生影响．     

基于安全隔离的边界防护体系的设计与实现

本文针对电子政务信息系统的特点,设计了基于安全隔离的边界防护体系。将安全隔离技术应用到电子政务中,实现了数据的安全高效实时传输,形成了多方位的安全边界防护体系架构。     

MACD与K线图技术在证券投机中的实证研究

利用MACD趋势指标与K线形态图进行相互验证技术,改进一般的基于MACD的证券买卖准则。实证结果表明,基于改进后的MACD买卖准则进行证券投机,几乎能使投机者捕捉到每一波段行情,从而获取较高收益。     

循环经济在赣州矿产资源开发与管理中的研究

如何利用赣州矿产资源优势发展本地经济,节约资源开采,充分利用现有资源,实现资源的循环利用,保持生态环境的良好发展具有重要意义。本文分析介绍了循环经济、赣州矿产资源及开发利用现状,并提出了实现矿业循环经济的具体措施。     

A nonlinear control method for the electromagnetic suspension system of the maglev train

To deal with the inherent nonlinearity and open-loop instability of the electromagnetic suspension (EMS) system, a new nonlinear control method is proposed. The simulation results show that, for a PID controller, the overshoot of the system response to an airgap step disturbance is about 3 mm, and the transient time is 6 s; however, for the proposed nonlinear controller, there is no overshoot and transient time within 2 s. The proposed method has a faster response and stronger robustness. With a designed bi-DSP suspension controller, this nonlinear control method was implemented on the Shanghai Urban Maglev Test Line (SUMTL) to validate its effectiveness and feasibility.

     

尿液喷浆造粒--生产复合肥的一种新工艺

简述了在团粒法工艺的基础上，用尿素熔融尿液或尿素车间二段蒸发器的尿液进行喷浆造粒生产复合肥的改造方案、改造内容、改造效果和投资情况。     

以888-JH为催化剂Na_2CO_3为碱源的脱硫技术

本文着重介绍以888-JH为催化剂,Na2CO3为碱源焦炉煤气(COG)湿式氧化法脱硫工艺的脱硫原理、影响因素,并介绍了现场试验结果。认定单独使用888-JH可以替代PDS+RTS获得脱硫效率99%以上和出口H2S含量小于5mg/m3的较佳脱硫效果。     

Factors influencing magnetic polymer microspheres prepared by dispersion polymerization

Magnetic iron oxide (Fe₃O₄) was prepared by a coprecipitation method. Core–shell composite magnetic polymer microspheres with carboxyl groups were synthesized by the dispersion polymerization of styrene and acrylic acid in the presence of magnetic oxide, and dibenzoyl peroxide was used as an initiator. The synthesized magnetic polymer microspheres were characterized with X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and so forth. The results indicated that the product was single‐phase Fe₃O₄, and its average size was about 10 nm. The configuration of the microspheres, which contained carboxyl groups, was spherical, and the average size was about 2 μm. The results of vibrating sample magnetometry tests showed that the magnetic powders produced by different surfactants had different saturation magnetizations. When poly(ethylene glycol) with a weight‐average molecular weight of 4000 was used as a surfactant, the saturation magnetization of the samples reached 69.2 emu/g. The factors that affected the shape, magnetism, size, and distribution of the microspheres were also studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007