反倾岩质边坡弯曲倾倒-剪切滑移破坏分析方法研究

目前反倾岩质边坡弯曲倾倒破坏分析方法仍以基于极限平衡理论的悬臂梁模型为主,但大多未考虑坡脚岩层的剪切破坏。为准确评价该类边坡的稳定性,建立考虑坡脚岩层剪切破坏的分析计算方法。首先,根据岩层变形破坏特征,将边坡分为后缘稳定区、中部弯曲倾倒区和前缘剪切区3个区域;其次,建立弯曲倾倒-剪切滑移破坏模式的稳定性分析方法;最后,通过工程实例验证,并进行参数分析。研究结果表明:提出的分析方法与工程实际符合性较好;边坡在倾角较陡、坡角较大时稳定性最差,坡角对边坡稳定性影响大于岩层倾角的影响;岩层厚度及层面内摩擦角增加有利于边坡稳定性,且会扩大坡脚剪切区范围。研究成果对反倾岩质边坡破坏的防治具有实践指导意义。     

Bead-based polymerase chain reaction on a microchip

We present a bead-based approach to microfluidic polymerase chain reaction (PCR), enabling fluorescent detection and sample conditioning in a single microchamber. Bead-based PCR, while not extensively investigated in microchip format, has been used in a variety of bioanalytical applications in recent years. We leverage the ability of bead-based PCR to accumulate fluorescent labels following DNA amplification to explore a novel DNA detection scheme on a microchip. The microchip uses an integrated microheater and temperature sensor for rapid control of thermal cycling temperatures, while the sample is held in a microchamber fabricated from (poly)dimethylsiloxane and coated with Parylene. The effects of key bead-based PCR parameters, including annealing temperature and concentration of microbeads in the reaction mixture, are studied to achieve optimized device sensitivity and detection time. The device is capable of detecting a synthetically prepared section of the Bordetella pertussis genome in as few as 10 temperature cycles with times as short as 15?min. We then demonstrate the use of the procedure in an integrated device; capturing, amplifying, detecting, and purifying template DNA in a single microfluidic chamber. These results show that this method is an effective method of DNA detection which is easily integrated in a microfluidic device to perform additional steps such as sample pre-conditioning.     

基于光通信的数据单向导入系统的设计与实现

随着信息网络的日趋成熟,网络信息安全尤其是内网信息安全,越来越受到人们的关注,成为一时研究的热点。其中如何防止在移动存储设备与内网计算机信息交流过程中内网信息流失的问题,显得尤为迫切。为此,本文提出一种基于光通信的数据单向导入系统,为用户提供一种安全地将信息或者数据单向导入到内网的解决方案。利用光的单向性,从传输通道上卡断了反向的可能,有效地保护内网的机密信息不会流失到外部,同时做到良好的人机交互,用户可以任意选择存储设备中的文件发送。     

Simulation of smoke flow and longitudinal ventilation in tunnel fire

1 Introduction The tunnel is one of the important facilities of railroad and highway transportation, and also a throat of railroad and highway. With the development of transportation, there are more and more tunnels. Although the tunnel fire occurs seldo…     

基于无线网络的制造业物料配送系统的设计*

针对制造业传统物料配送系统存在的缺点,基于业务流程再造的理念,运用无线局域网技术设计了全新的物料配送系统。该系统能够对配送流程进行优化,提高了配送效率,有效地解决了配送不及时所造成的生产速度瓶颈问题。     

基于ANSYS Workbench下芯片的耦合研究

为了研究电子设备在温度较高的环境下电路板元器件散热和在温度载荷下引起的变形,通过ANSYS数值模拟的方法建立流热耦合的电路芯片散热模型,对芯片与电路板表面形成冲击压力进而导致热疲劳进行研究,分析与讨论温度对流场与静力学结构的影响.通过数值模拟分析得出:电路板为铝材质的变形很大,变形从中间凸起;而PCB材料电路板的变形不是局部变形,属于扩散式变形.     

Preparation of carbon nanotube composite material with metal matrix by electroplating

It is demonstrated that the nickel can be deposited directly on the surface of carbon nanotubes without pre-sensitization by Sn^2＋ and Pd^2＋ in a watt bath containing suspended nanotubes by electroplating. The nickel is deposited as spherical nanoparticle on the nanotubes. By increasing reaction time, the carbon nanotube is fully coated with nickel. A probable model, which represents the formation process of carbon nanotube-nickel composites by electroplating, is presented. The results show that this method is efficient and simple for preparing carbon nanotube-metal composite.     

An experimental investigation into soft-pad grinding of wire-sawn silicon wafers

Silicon is the primary semiconductor material used to fabricate microchips. A series of processes are required to manufacture high-quality silicon wafers. Surface grinding is one of the processes used to flatten wire-sawn wafers. A major issue in grinding of wire-sawn wafers is reduction and elimination of wire-sawing induced waviness. Results of finite element analysis have shown that soft-pad grinding is very effective in reducing the waviness. This paper presents an experimental investigation into soft-pad grinding of wire-sawn silicon wafers. Wire-sawn wafers from a same silicon ingot were used for the study to ensure that these wafers have similar waviness. These wafers were ground using two different soft pads. As a comparison, some wafers were also ground on a rigid chuck. Effectiveness of soft-pad grinding in removing waviness has been clearly demonstrated.     

用于气体保护焊的自动混气设备

介绍了一种用于焊接现场的气体保护焊的自动混气设备，该设备能精确控制气体混合比例。设备主要由气体传输、气体混合、信号检测和电气控制几大部分组成。计算机适时采集、显示混合气体的混合比例、输出压力、气体湿度等信息，超限发出声光报警。混气设备通过气体分析仪、比例阀和计算机形成闭环控制，从而实现气体混合比例的精确控制。     

碳氮共渗提高空心圆柱滚子轴承寿命的研究

通过GCr15钢碳氮共渗,在表层获得大量的残余奥氏体。磨损中,马氏体组织剥落,残余奥氏体则成小岛状,进而在表面迁移发生形变诱发马氏体相变,使耐磨性得以提高。同时,共渗在空心滚子内表面造成的压应力对改善弯曲疲劳性能有利。