Comparison among various energy management strategies for reducing hydrogen consumption in a hybrid fuel cell/supercapacitor/battery system

The aim of this study is to introduce a comprehensive comparison of various energy management strategies of fuel cell/supercapacitor/battery storage systems. These strategies are utilized to manage the energy demand response of hybrid systems, in an optimal way, under highly fluctuating load condition. Two novel strategies based on salp swarm algorithm (SSA) and mine-blast optimization are proposed. The outcomes of these strategies are compared with commonly used strategies like fuzzy logic control, classical proportional integral control, the state machine, equivalent fuel consumption minimization, maximization, external energy maximization, and equivalent consumption minimization. Hydrogen fuel economy and overall efficiency are used for the comparison of these different strategies. Results demonstrate that the proposed SSA management strategy performed best compared with all other used strategies in terms of hydrogen fuel economy and overall efficiency. The minimum consumed hydrogen and maximum efficiency are found 19.4 gm and 85.61%, respectively.     

Retardation of High-Temperature Fuel Ash Corrosion of Fireside Boiler Tubes via Nanoparticles

The high-temperature corrosion rate of boiler tubes was studied as a function of inhibitor concentration, time, and temperature in the absence and presence of fuel ash. Samples of steel tubes were taken from boilers that operate in Northern Baghdad Station for Electric Power Generation. Fuel ash was collected from the boiler combustion chamber, as well. Normal and nano-MgO were used as a corrosion inhibitor in different mixing ratios. A weight loss technique was used to evaluate the corrosion rates, while scanning electron microscopy was used to study the surface morphology. It was seen that corrosion rates increased with both time and temperature, and decreased with the addition of inhibitors. The maximum inhibitor efficiency was 81 %, obtained via using nano-MgO at mixing weight ratio 2:1, 600 °C, and 10 h. The Presence of fuel ash had harmful effects on the steel surface.     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...     

Application of MIKE SHE modelling system to set up a detailed water balance computation

Estimation of total water balance is a substantial issue for watershed modelling in order to simulate the major components of the hydrological cycle to determine the stress of different anthropogenic activities on the available water resources within a catchment. In this context, the fully distributed physically based MIKE SHE modelling system was used to simulate the individual hydrological components of the total water balance for the Paya Indah Wetlands (PIW) watershed in the west of Peninsular Malaysia. Results reveal that the overall water balance is predominantly controlled by climate variables. Application of the model to the PIW watershed provides detailed estimation of the total water balance for a first‐order catchment in which actual evapotranspiration (ET) represents approximately 65 and 58%, while overland flow (OL) to the PIW lake system represents 12.38 and 12.3% of the total rainfall during the calibration and validation periods, respectively. The difference of the inflow and outflow was taken as storage in depth. Overall, the model gives a reasonable output of total error of less than 1% of the total rainfall, which in turn indicates that the interaction among components is satisfactorily sustained.     

Effect of Oxide Fluxes on Depth of Penetration in Flux Bounded Tungsten Inert Gas Welding of AISI 304L Stainless Steel

Flux Bounded Tungsten Inert Gas (FBTIG) welding is a modified TIG welding process in which increased depth of penetration (DoP) can be achieved by laying thin flux coatings on either side of the weld centerline. The effect of three single component fluxes viz., SiO₂, TiO₂ and Cr₂O₃ on bead geometry of autogenous melt runs in AISI 304L stainless steel for the gap between the flux layers varying from 2 to 7 mm, is studied. Results show that DoP can be improved significantly in FBTIG process using single component fluxes. Nature of the flux and the gap between the flux layers influence the weld bead geometry. Among the three fluxes used, SiO₂ is more efficient in improving the DoP. Arc constriction is the predominant mechanism operative in improving the DoP in FBTIG welding. Possibility of change in solidification mode in FBTIG weld metals of stainless steels is highlighted.     

A review of heat pipe systems for heat recovery and renewable energy applications

Advancements into the computational studies have increased the development of heat pipe arrangements, displaying multiphase flow regimes and highlighting the broad scope of the respective technology for utilization in passive and active applications. The purpose of this review is to evaluate current heat pipe systems for heat recovery and renewable applications utility. Basic features and limitations are outlined and theoretical comparisons are drawn with respect to the operating temperature profiles for the reviewed industrial systems. Working fluids are compared on the basis of the figure of merit for the range of temperatures. The review established that standard tubular heat pipe systems present the largest operating temperature range in comparison to other systems and therefore offer viable potential for optimization and integration into renewable energy systems.     

An efficient numerical algorithm for multi-dimensional time dependent partial differential equations

An efficient and robust numerical scheme based on Haar wavelets and finite differences is suggested for the solution of two-dimensional time dependent linear and nonlinear partial differential equations (PDEs). Excellent feature of the scheme is the conversion of linear and non-linear PDEs to algebraic equations which are comparatively easy to handle. Convergence of the scheme, which guarantees small error norm as the resolution level increases, is also an important part of this work. Different error norms are computed to check efficiency of the technique. Computations verify accuracy, flexibility and low computational cost of the method.     

A novel silver–aluminium high-temperature die attach nanopaste system: the effects of organic additives content on post-sintered attributes

An Ag–Al die attach material having a fixed Ag–Al nanoparticles weight percent content (80–20 %), as well as varying organic additives weight percent content was formulated. The total nanoparticle weight percent content was varied between 84.7 and 87.0 %. As the organic additives content in the Ag₈₀–Al₂₀ die attach material decreased from 15.3 to 13.0 %, the nanopaste’s viscosity increased. The die attach material was sintered at 380 °C for 30 min to form Ag₂Al and Ag₃Al compounds. With decreasing organics content from 15.3 to 13.0 %, the porosity of the post-sintered samples also decreased from 30 to 19 %, while the density increased from 2.36 to 6.42 g/cm³. The highest melting point was recorded for the sample with the least organic weight percent content at 519 °C. The coefficient of thermal expansion and electrical conductivity values varied between 6.99–7.74 × 10^?6/ °C and 0.95–1.01 × 10⁵ (ohm-cm)^?1 respectively with decreasing organic content from 15.3 to 13.0 %. The electrical conductivity values recorded were higher than or equal to that of most solder alloy die attach materials. By changing the organic additives content in the Ag₈₀–Al₂₀ die attach material, suitable properties are obtained for high temperature die attach applications.     

Effect of rolling deformation on the structures and properties of multi‐walled carbon nanotube filled isotactic polypropylene

Isotactic polypropylene filled with various contents of multi‐walled carbon nanotubes (MWCNTs) were fabricated by the injection molding technique and then rolled at room temperature. The unrolled samples (URS) and rolled samples (RS) were characterized by X‐ray diffraction studies, scanning electron microscopy, mechanical and micromechanical tests and differential thermal analyses. Although the URS exhibit the lamellar α‐crystal with a*‐axis orientation, the RS show the same crystals with both a*‐ and c‐axis orientation, which is explained by interlamellar and intralamellar slips and lamellar destruction. Scanning electron micrographs display distinct surface morphological features for both URS and RS. While the tensile strength of RS is higher than that of URS, the Young's modulus (Y) is found to be lower than that of URS. Anisotropy in microharness (H) parallel and perpendicular to the rolled direction has been detected, although H for both samples increases with increasing MWCNT contents. The average relationship H/Y ≈ 0.18 as estimated for URS is closer to the predicted value of 0.10 for polymers than the H/Y ≈ 0.22 obtained for RS. The lamellar thickness for URS increases with increase of MWCNT content and that for RS decreases, as evaluated from both differential thermal analyses and X‐ray diffraction data. Copyright © 2011 Society of Chemical Industry     

Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater

The use of hybrid advanced oxidation processes(AOPs) for the removal of pollutants from industrial effluents has been extensively studied in recent literature. The aim of this study is to compare the performance of the photo,Fenton, photo-Fenton and ozone–photo–Fenton processes in terms of color removal and chemical oxygen demand(COD) removal of distillery industrial effluent together with the associated electrical energy per order. It was observed from the experimental results that the O_3/UV/Fe~(2 +)/H_2O_2 process yielded a 100% color and95.50% COD removals with electrical energy per order of 0.015 k W·h·m~(-3) compared to all other combinations of the AOPs. The effects of various operating parameters such as H_2O_2 and Fe~(2+) concentration, effluent pH, COD concentration and UV power on the removal of color, COD and electrical energy per order for the ozone–photo–Fenton process was critically studied and reported. The color and COD removals were analyzed using a UV/Vis spectrometer and closed reflux method.