Capacity allocation problem in flexible manufacturing systems: branch and bound based approaches

This study considers an operation assignment and capacity allocation problem that arises in flexible manufacturing systems. The machines have limited time and tool magazine capacities and the available tools are limited. Our objective is to maximise total weight of assigned operations. We develop a branch and bound algorithm that finds the optimal solutions and a beam search algorithm that finds high quality solutions in polynomial time.     

Seismic,ground motion and geotechnical characteristics of the 2011 Van-Erciş and Van-Edremit earthquakes of Turkey,and assessment of geotechnical damages

Two devastating earthquakes with moment magnitudes of 7.2 and 5.6 occurred on October 23, 2011 (Van-Erci? earthquake) and November 9, 2011 (Van-Edremit earthquake), respectively, in the Van Province of the eastern Turkey. The Van-Erci? and Van-Edremit earthquakes caused 604 and 38 fatalities, respectively, and heavy damage to buildings and other structures, particularly in Erci? town and Van City. In this study, characteristics of both main shocks and their geotechnical aspects, such as local site conditions, liquefaction phenomena and associated ground deformations and slope failures are evaluated. The failures of slopes and embankments and rock falls and ground liquefaction may also be indications of diluted ground deformation caused by the earthquake fault. It seems that a wedge-like body bounded by two fault planes was uplifted. As a result of this movement, the northern shoreline of Van Lake uplifted. The November 9, 2011 Van-Edremit earthquake was triggered due to the variation of crustal stresses induced by the October 23, 2011 earthquake. The effects of local site conditions have contributed to the damage of some parts of Erci? city and its vicinity; however, the ground liquefaction was not observed in the city as anticipated. With a magnitude of 5.6, the Van-Edremit earthquake is probably the smallest magnitude earthquake to cause liquefaction in Turkey so far.     

Metallo‐supramolecular materials based on terpyridine‐functionalized polyhedral silsesquioxane

In this study, novel metallo‐supramolecular materials based on terpyridine‐functionalized polyhedral silsesquioxane were synthesized from 4′‐chloro‐2,2′:6′,2″‐terpyridine and amino‐group‐functionalized polyhedral oligomeric silsesquioxane. The obtained terpyridine‐functionalized polyhedral silsesquioxanes were converted to metallo‐supramolecular hybrid materials by coordination polycondensation reaction with Co(II) or Cu(II) ions. The supramolecular polymers created were characterized by means of structure, morphology and stimuli‐responsive performance employing scanning electron microscopy, amperometric techniques and UV–visible and Fourier transform IR spectroscopy. UV?visible and cyclic voltammetry studies showed that both the optical and electrochemical properties of metallo‐supramolecular materials are affected by the substituent at the pyridine periphery. The supramolecular polymers obtained exhibited electrochromism during the oxidation processes of cyclic voltammogram studies. As a result, these terpyridine‐functionalized polyhedral silsesquioxanes are good candidates for electronic, opto‐electronic and photovoltaic applications as smart stimuli‐responsive materials. © 2013 Society of Chemical Industry     

Soot formation in high pressure laminar diffusion flames

The details of the chemical and physical mechanisms of the soot formation process in combustion remain uncertain due to the highly complex nature of hydrocarbon flames, and only a few principles are firmly established mostly for atmospheric conditions. In spite of the fact that most combustion devices used for transportation operate at very high pressures (e.g., aircraft gas turbines up to 40 atm, diesel engines exceeding 100 atm), our understanding of soot formation at these pressures is not at a desirable level, and there is a fundamental lack of experimental data and complementary predictive models. The focus of this review is to assess the experimental results available from laminar co-flow diffusion flames burning at elevated pressures. First, a brief review of soot formation mechanisms in diffusion flames is presented. This is followed by an assessment of soot diagnostics techniques, both intrusive and non-intrusive, most commonly used in soot experiments including the laser induced incandescence. Then the experimental results of soot measurements done at elevated pressures in diffusion flames are reviewed and critically assessed. Soot studies in shock tubes and in premixed flames are not covered. Smoke point fuel mass flow rate is revisited, and shortcomings in recent measurements are pointed. The basic requirements for tractable and comparable measurements as a function of pressure are summarized. Most recent studies at high pressures with aliphatic gaseous fuels show that the soot yield displays a unified behaviour with reduced pressure. The maximum soot yield seems to reach a plateau asymptotically as the pressure exceeds the critical pressure of the fuel. Lack of experimental data on the sensitivity of soot morphology to pressure is emphasized. A short summary of efforts in the literature on the numerical simulation of soot formation in diffusion flames at high pressures is the last section of the paper.     

Comparison of lactic acid bacteria diversity during the fermentation of Tarhana produced at home and on a commercial scale

Food Science and Biotechnology - In this study, lactic acid bacteria diversity during the fermentation of homemade and commercially prepared Tarhana, a traditional fermented cereal food from...     

Study on the behavior of the trace metal and macro minerals in Mytilus galloprovincialis as a bioindicator species: the case of Marmara Sea, Turkey

Sea food is a major source of animal protein. Marine foods are very rich sources of mineral components. The total content of minerals in the raw flesh of marine fish and invertebrates is in the range of 0.6–1.5% wet weight. The contents of Na, K, Ca, Mg and P are up to 1 mg/100 g, whereas those of Fe, Zn, I are less than 1 mg/100 g. Mussels (Mytilus galloprovincialis) were investigated for macro and trace element composition throughout the year. Ranges of moisture, ash, protein and fat contents were 79.76–87.46 g/100 g, 1.06–2.06 g/100 g, 7.28–12.65 g/100 g and 0.33–3.49 g/100 g, respectively. While the highest protein and fat values were found in the summer (July–August), the highest moisture and ash contents were found in the winter (December–January). The contents of highest Na, K, Ca were found in the summer. Cadmium, lead and copper were found to be below the legislative limits throughout year. High levels of mercury were found in January and October. It should be discussed whether mussel may provide an alternative source of mineral for healthy nutrition.     

Numerical Simulation of the Mechanical Properties of Sintered and Bonded Perforated Hollow Sphere Structures (PHSS)

This paper investigated the uniaxial mechanical properties of a new type of hollow sphere structures. For this new type, the sphere shell was perforated by several holes in order to open the inner sphere volume and surface. The mechanical properties, i.e. elastic properties and initial yield stress of perforated hollow sphere structures (PHSS) in a primitive cubic arrangement were numerically evaluated for different hole diameters and different joining techniques of the hollow spheres. The results are compa...     

Multi-channel energy detection under phase noise: analysis and mitigation

For the development of highly integrated, flexible and low-cost cognitive radio (CR) devices, simple transceiver architectures, like direct-conversion receiver, are expected to be deployed and provide viable radio frequency (RF) spectrum sensing solutions for practical implementation. Yet, this can be very challenging task especially if spectrum sensing and down-conversion are conducted over multiple RF channels simultaneously for improved efficiency in channel scans. Then, the so-called dirty RF problem that degrades link performance of traditional transmission systems starts to be influential from spectrum sensing perspective as well. The unavoidable RF impairments, e.g., oscillator phase noise in direct-conversion receiver, could generate crosstalk between multiple channels that are down-converted simultaneously, and thus considerably limit the spectrum sensing capabilities. Most of the existing spectrum sensing studies in literature assume an ideal RF receiver and have not considered such practical RF hardware problem. In this article, we study the impact of oscillator phase noise on energy detection (ED) based spectrum sensing in multi-channel direct-conversion receiver scenario. With complex Gaussian primary user (PU) signal models, we first derive the detection and false alarm probabilities in closed-form expression. The analytical results, verified through extensive simulations, show that the wideband multi-channel sensing receiver is very sensitive to the neighboring channel crosstalk induced by oscillator phase noise. More specifically, it is shown that the false alarm probability of multi-channel energy detection increases significantly, compared to the ideal RF receiver case. The exact performance degradation depends on the power of neighboring channels as well as statistical characteristics of the phase noise in the deployed receiver. In order to prevent such performance degradation in spectrum identification, an enhanced energy detection technique is proposed. The proposed technique calculates the leakage power from neighboring channels for each channel and improves the sample energy statistics by subtracting this leakage power from the raw values. An analytical expression is derived for the leakage power which is shown to be a function of power spectral levels of neighboring channels and 3-dB bandwidth of phase noise process. Practical schemes for estimating these two quantities are discussed. Extensive computer simulations show that the proposed enhanced detection yields false alarm rates that are very close to those of an ideal RF receiver and hence clearly outperforms classical energy detection.