Suppression of phonon‐mediated hot carrier relaxation in type‐II InAs/AlAsxSb1 − x quantum wells: a practical route to hot carrier solar cells

InAs/AlAs_xSb_{1 − x} quantum wells are investigated for their potential as hot carrier solar cells. Continuous wave power and temperature‐dependent photoluminescence indicate a transition in the dominant hot carrier relaxation process from conventional phonon‐mediated carrier relaxation below 90 K to a regime where inhibited radiative recombination dominates the hot carrier relaxation at elevated temperatures. At temperatures below 90 K, photoluminescence measurements are consistent with type‐I quantum wells that exhibit hole localization associated with alloy/interface fluctuations. At elevated temperatures, hole delocalization reveals the true type‐II band alignment, where it is observed that inhibited radiative recombination due to the spatial separation of the charge carriers dominates hot carrier relaxation. This decoupling of phonon‐mediated relaxation results in robust hot carriers at higher temperatures, even at lower excitation powers. These results indicate type‐II quantum wells offer potential as practical hot carrier systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Modified ESPRIT (M-ESPRIT) algorithm for time delay estimation in both any noise and any radar pulse context by a GPR radar

This paper presents M-ESPRIT, a modified version of the ESPRIT algorithm, for the purpose of time delay estimation of backscattered radar signals. The proposed algorithm takes both the transmitted pulse shape and any noise into account. It can process raw data from experimental device without the preprocessing which would be required with the conventional ESPRIT algorithm.     

Performance evaluation of path optimization schemes for inter‐switch handoff in wireless ATM networks

One of the major design issues in wireless ATM is the support of inter‐switch handoff. An inter‐switch handoff occurs when a mobile terminal moves to a new base station connecting to a different switch. Recently, a two‐phase handoff protocol has been proposed to support inter‐switch handoff in wireless ATM networks. With the aim of shortening handoff delay while using the network resources efficiently, the two‐phase handoff protocol employs path extension for each inter‐switch handoff, followed by path optimization if necessary. To implement the two‐phase handoff protocol efficiently, we need to determine when to trigger path optimization. In this paper, we propose and analyze three path optimization schemes, namely: periodic, exponential, and Bernoulli, for the two‐phase handoff protocol. The design objective is to determine the time to invoke path optimization such that the average cost per connection is minimized. We develop a discrete time analytical model and a discrete‐event simulation model for comparing the performance of the three path optimization schemes. Results indicate that the Bernoulli path optimization scheme outperforms the other two schemes by providing a lower average cost per connection. The proposed models can also be adapted to analyze other path optimization schemes in general. This revised version was published online in July 2006 with corrections to the Cover Date.     

DUV-induced micro and nanopatterning of polymer plasma deposited films

A simple method is described for patterning polymer surfaces with reactive groups. This entails pulsed plasma deposition of anhydride functionalized films, followed by DUV irradiation using a ArF excimer laser. Micro and nano-scale patterning was demonstrated, leading to well defined structures with controlled chemistry and/or geometries. We investigated the chemical changes induced by DUV irradiation. Among other parameters, we demonstrated that the covalent attachment of an amine terminated nucleophile via the aminolysis improved significantly the DUV photosensitivity. Using this approach it was possible to create combinatorial patterned surfaces. In particular such patterned polymer films appear as excellent candidate to study the effect of nanostructuration on the development of biofilms.     

Satellite image compression by concurrent representations of wavelet blocks

This paper proposes a complete compression and coding scheme for on-board satellite applications considering the main on-board constraints: low computational power and easy bit rate control. The proposed coding scheme improves the performance of the current Consultative Committee for Space Data Systems (CCSDS) recommendation for a low additional complexity. We consider post-transforms in the wavelet domain, select the best representation for each block of wavelet coefficients, and encode it into an embedded bit stream. After applying a classical wavelet transform of the image, several concurrent representations of blocks of wavelet coefficients are generated. The best representations are then selected according to a rate-distortion criterion. Finally, a specific bit-plane encoder derived from the CCSDS recommendation produces an embedded bit stream ensuring the easy rate control required. In this article, both the post-transforms and the best representation selection have been adapted to the low complexity constraint, and the CCSDS coder has been modified to compress post-transformed representations.     

Semi-supervised superpixel classification for medical images segmentation: application to detection of glaucoma disease

Glaucoma is a disease characterized by damaging the optic nerve head, this can result in severe vision loss. An early detection and a good treatment provided by the ophthalmologist are the keys to preventing optic nerve damage and vision loss from glaucoma. Its screening is based on the manual optic cup and disc segmentation to measure the vertical cup to disc ratio (CDR). However, obtaining the regions of interest by the expert ophthalmologist can be difficult and is often a tedious task. In most cases, the unlabeled images are more numerous than the labeled ones.We propose an automatic glaucoma screening approach named Super Pixels for Semi-Supervised Segmentation “SP3S”, which is a semi-supervised superpixel-by-superpixel classification method, consisting of three main steps. The first step has to prepare the labeled and unlabeled data, applying the superpixel method and bringing in an expert for the labeling of superpixels. In the second step, We incorporate prior knowledge of the optic cup and disc by including color and spatial information. In the final step, semi-supervised learning by the Co-forest classifier is trained only with a few number of labeled superpixels and a large number of unlabeled superpixels to generate a robust classifier. For the estimation of the optic cup and disc regions, the active geometric shape model is used to smooth the disc and cup boundary for the calculation of the CDR. The obtained results for glaucoma detection, via an automatic cup and disc segmentation, established a potential solution for glaucoma screening. The SP3S performance shows quantitatively and qualitatively similar correspondence with the expert segmentation, providing an interesting tool for semi-automatic recognition of the optic cup and disc in order to achieve a medical progress of glaucoma disease.     

Simple iterative receivers for MIMO LP-OFDM systems

In this paper,Lp-ofdm is combined with differentMimo schemes in order to improve performance in terms of diversity gain and to exploit capacity brought by theMimo channel. The original contribution is the development of a generic iterative receiver designed forLp mimo transmission able to work whatever the antenna configuration and the spatial coding scheme. By using a globalMmse criterion, interference terms coming from space-time coding and linear precoding are jointly treated leading to a very good trade-off between performance and complexity compared to trellis based detectors particularly for high order modulations, high number of antennas and/or large size of precoding matrices.     

Grain morphology of Cu damascene lines

The evolution of the grain structure through annealing of narrow damascene Cu interconnects is important for any further design of highly integrated circuits. Here we present a comprehensive transmission electron microscopy study of damascene lines between 80 nm and 3000 nm wide. Experimental results clearly indicate that morphology evolutions through annealing are strongly influenced by the line width. If the lines are wider than 250 nm a strong connection between the grain structure within the lines and the overburden copper is present at least after sufficient annealing. Once the lines are as small as 80 nm the grain structure within the lines are only weakly connected to the overburden copper grown above.     

高温处理对镍诱导晶化硅上的薄膜晶体管性能的影响

采用标准双栅 CMOS工艺在镍诱导非晶硅横向晶化形成的多晶硅上制造了高性能的薄膜晶体管 ,并详细研究了器件制备前高温预处理对薄膜晶体管性能的影响 .实验发现不同的温度处理 ,将引起器件性能的显著变化 .在10 0 0℃预处理温度下获得了最好的器件性能 .10 0 0℃在 NMOS管中测得的电子迁移率达 314 cm2 / (V· s) ,分别比在 110 0℃和未做高温处理下的大 10 %和 2 2 % .10 0 0℃下器件的最大开关电流比也达到了 3× 10 8.对器件的进一步重复性研究证实了上述结果的可靠性