Selective catalytic transformations of methanol to C2-C3 hydrocarbons over the new zeolite type LZ 132

The small pore zeolite HLZ 132 exhibits, in comparison with other zeolites, an increased selectivity for the transformation of methanol to ethylene in the reaction temperature range 350–500 °C: the weight ratio of C₂H₄ to C₃H₆ in the products ranges between 1 and 4 at WHSV=2 h^–1. Besides the effect of the reactant shape selectivity this fact may be interpreted by the participation of the asymmetrical methoxy groups in the surface as well as by proton-donor centres of lower acidity which do not catalyze the oligomerization of ethylene but which do the more basic molecule of propylene, thereby generating polyene-type coke.     

A comparative study between chloride and calcined carbonate hydrotalcites as adsorbents for Cr(VI)

Hydrotalcite-type solids with different metal ions within the layers (M^II = Mg or Zn and M^III = Al and/or Fe) and carbonate or chloride between them have been synthesized. Chloride-LDHs and the solids obtained upon carbonate-LDHs calcination have been evaluated in the adsorptive removal of Cr(VI) from aqueous solutions. All the adsorption tests were carried out at 30 °C following two different stirring conditions: a) using a thermostatic bath with mechanical stirring at a speed of 52 rpm or b) in a sonicator bath under ultrasound waves. It was observed that no significant difference in the amount of adsorbed chromate is produced in both cases but the time spent to reach the equilibrium is much lower when the adsorbent/adsorbate mixture is submitted to ultrasounds. In all experiments L-type adsorption isotherms were obtained. The results show that chloride hydrotalcites are better adsorbents than calcined CO₃-hydrotalcites and in these last ones their adsorption capacity increases with increasing the surface area: MgAlFe > MgAl > MgFe > ZnAl.     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.     

On the Gröbner basis triangularization of constraint equations in natural coordinates

Efficient dynamic simulation code is essential in many situations (including hardware-in-the-loop and model-predictive control applications), and highly beneficial in others (such as design optimization, sensitivity analysis, parameter identification, and controller tuning tasks). When the number of modeling coordinates n exceeds the degrees-of-freedom of the system f, as is often the case when closed kinematic chains are present, the governing dynamic equations consist of n second-order ordinary differential equations (ODEs) coupled with m=n?f algebraic constraint equations. This set of n+m index-3 differential-algebraic equations can be difficult to solve in an efficient yet accurate manner. Embedding (or generalized coordinate partitioning) can be used to obtain f ODEs (one for each independent acceleration), which are generally more amenable to numerical integration; however, the dependent positions are typically computed from the independent positions at each time step. Newton–Raphson iteration is often used for solving the position-level kinematics, but only provides solutions to within a specified tolerance, and can require several iterations to converge. In this work, Gröbner bases are used to obtain recursively solvable symbolic solutions for the dependent positions, which can then be evaluated to within machine precision using a fixed number of arithmetic operations. Natural coordinates are particularly attractive in this context, since the resulting constraint equations are maximally quadratic polynomials and are, therefore, easily triangularized. The proposed approach is suitable for use in an automated formulation procedure and, as demonstrated by three examples, is capable of generating highly efficient simulation code with minimal additional effort required at the formulation stage.     

Enhancing decentralized service discovery in open service-oriented multi-agent systems

Service-oriented multi-agent systems are dynamic systems that are populated by heterogeneous agents. These agents model their functionality as services in order to allow heterogeneous agents or other entities to interact with each other in a standardized way. Furthermore, due to the large-scale and adaptative needs of the system, traditional directory facilitators or middle-agents are not suitable for the management of agent services. This article proposes the introduction of homophily in service-oriented multi-agent systems to create efficient decentralized and self-organized structures where agents have a greater probability of establishing links with similar agents than with dissimilar ones. This similarity is based on two social dimensions: the set of services that an agent provides and the organizational roles that it plays. A second contribution is an algorithm for service discovery that it is carried out taking into account the local information that is related to the homophily between agents. The experiments compare our proposal with other proposals in distributed environments. The results show that the proposed structure and algorithm offer desirable features for service discovery in decentralized environments. Specifically, these features provide short paths and a high success rate in the service discovery process and resilience under deliberate failures.     

Mobile digcovery: discovering and interacting with the world through the Internet of things

The application of Internet-enabled devices in the real world for the development of Smart Cities, environmental monitoring, bus tracking, and parking requires scalability, extensibility, and integration of emerging resources to reach a suitable ecosystem for data acquisition and interaction with citizens. Internet of things needs to offer efficient support for global communications and access to services and information. It needs to enable homogeneous and seamless machine-to-machine communication for different solutions and applications. This work presents an homogeneous and suitable mechanism for global resource discovery, device access for deployed smart objects in different scenarios, and sensors and devices from end users (participative sensing). The integration of legacy and sensors already available from smart buildings and smart objects is presented. For this purpose, a resolution infrastructure called “digcovery” is defined for maximizing efficiency and sustainability of deployments. Digcovery architecture offers the framework to allow users to register/include their own sensors into a common infrastructure and access/discover the available resources through mobile digcovery. Mobile digcovery exploits the context-awareness, geo-location, and identification technologies available in mobile platforms such as smartphones to discover, interact, and access the resources through its ElasticSearch engine.     

Effect of olive paste kneading process time on the overall quality of virgin olive oil

The influence of the olive paste malaxation time on the composition and the industrial output of oil was investigated. To this purpose, three Italian olive varieties (Leccino, Dritta, Caroleo) were processed with a centrifugal system for six malaxation periods (0, 15, 30, 45, 60 and 75 min). The concentrations of the majority of the oil constituents changed during the malaxation. However, these changes were not significant for all of them: the contents of β‐carotene, the major xanthophylls, chlorophylls a and b, pheophytins a and b in the oils increased progressively with increasing malaxing times, whereas the contents of simple and hydrolysable phenols (secoiridoid derivatives), o‐diphenols and total phenols decreased. A significant increase in total volatiles and green volatiles of the lipoxygenase cascade (C₆ aldehydes, C₆ alcohols, C₅ alcohols and C₅ carbonyls) was detected. An opposite trend was observed for the green C₆ esters. As a result, the global analytical quality, flavour, aroma and shelf‐life of the oils were negatively affected. The oil yield increased substantially up to 45 min of paste malaxation times. Beyond 60 min, the yields tended to decrease.     

Relation of swelling and Tg depression to the apparent free volume of a particle‐filled,epoxy‐based adhesive

The effect of hygrothermal aging on a particle‐filled, epoxy‐based adhesive was studied using a gravimetric sorption technique. This study has explored moisture sorption characteristics as well as the associated behaviors of swelling and the depression of the glass transition temperature (T_g). We observed that the diffusion of water in this adhesive has a non‐Fickian behavior, and the depression of T_g proceeds to a definite value that is independent of the final equilibrium water content of the system. Our observations suggest that water diffuses into the polymer in a dual‐sorption mode, in which water resides in two populations. In one population, water is considered to occupy apparent free volume of the adhesive, and the second population water infiltrates polymer structure and forms hydrogen‐bonded clusters. Our results show that hygrothermal aging temperature and swelling do not alter the apparent free volume of this adhesive. We conclude that the constant value of T_g depression at saturation implies that only water in the apparent free volume is responsible for the T_g depression, whereas the swelling proceeds through the formation of hydrogen bonds in the adhesive. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1436–1444, 2003     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.