Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers

Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003     

Progressive ladder network topology combining interferometric and intensity fiber-optic-based sensors

Progressive ladder topology is studied by consideration of its properties of power budget and coupler tailoring. Optimization criteria are addressed for lossless and real systems, and their basic characteristics are compared with other topologies. Numerical results are presented, and an experiment is described for the case in which the network supports interferometric and intensity (with referentiation) fiber-optic-based sensors.     

Satellite-based estimates of groundwater storage variations in large drainage basins with extensive floodplains

This study presents monthly estimates of groundwater anomalies in a large river basin dominated by extensive floodplains, the Negro River Basin, based on the synergistic analysis using multisatellite observations and hydrological models. For the period 2003-2004, changes in water stored in the aquifer is isolated from the total water storage measured by GRACE by removing contributions of both the surface reservoir, derived from satellite imagery and radar altimetry, and the root zone reservoir simulated by WGHM and LaD hydrological models. The groundwater anomalies show a realistic spatial pattern compared with the hydrogeological map of the basin, and similar temporal variations to local in situ groundwater observations and altimetry-derived level height measurements. Results highlight the potential of combining multiple satellite techniques with hydrological modeling to estimate the evolution of groundwater storage.     

Digital Image Analysis to Standardize a Photometric Method in Colorimetric Quantification

Abstract

Techniques applying digital images increasingly have been used in biology, medicine, physics, and other research areas. The image coordinates can represent light intensities values to be detected by a CCD. Based on this concept, a photometric system composed of a LED source and a digital camera as a detector was used for optical density measurements. Standards for permanganate, glucose, and protein solutions were determined by colorimetric methods using our device. Samples of protein of Pasteurella mutocida bacteria membrane and, also, fractions of rabbit kidney membrane, rich in Na, K‐ATPase, with unknown concentrations were dosed through the Hartree method using our photometric system.     

Least squares support vector machines with tuning based on chaotic differential evolution approach applied to the identification of a thermal process

In the past decade, support vector machines (SVMs) have gained the attention of many researchers. SVMs are non-parametric supervised learning schemes that rely on statistical learning theory which enables learning machines to generalize well to unseen data. SVMs refer to kernel-based methods that have been introduced as a robust approach to classification and regression problems, lately has handled nonlinear identification problems, the so called support vector regression. In SVMs designs for nonlinear identification, a nonlinear model is represented by an expansion in terms of nonlinear mappings of the model input. The nonlinear mappings define a feature space, which may have infinite dimension. In this context, a relevant identification approach is the least squares support vector machines (LS-SVMs). Compared to the other identification method, LS-SVMs possess prominent advantages: its generalization performance (i.e. error rates on test sets) either matches or is significantly better than that of the competing methods, and more importantly, the performance does not depend on the dimensionality of the input data. Consider a constrained optimization problem of quadratic programing with a regularized cost function, the training process of LS-SVM involves the selection of kernel parameters and the regularization parameter of the objective function. A good choice of these parameters is crucial for the performance of the estimator. In this paper, the LS-SVMs design proposed is the combination of LS-SVM and a new chaotic differential evolution optimization approach based on Ikeda map (CDEK). The CDEK is adopted in tuning of regularization parameter and the radial basis function bandwith. Simulations using LS-SVMs on NARX (Nonlinear AutoRegressive with eXogenous inputs) for the identification of a thermal process show the effectiveness and practicality of the proposed CDEK algorithm when compared with the classical DE approach.     

Comments on “A novel dead time compensator for stable processes with long dead times” [Journal of Process Control 22 (2012) 612–625]

This short communication analyzes the results recently presented in the paper “On a novel dead time compensator for stable processes with long dead times” published in the Journal of Process Control. In the mentioned paper it is argued that the proposed strategy, called modified Smith predictor (MSP), gives better performance than the filtered Smith predictor (FSP) dead-time compensator for stable processes with dead time. In fact MSP has the same structure as FSP and only some specific tuning rules of the filters are proposed. Therefore, in this work some aspects of the comparative analysis and tuning rules presented in the referred paper are discussed to show that MSP is a particular case of FSP and that for some particular cases its tuning rule does not allow for a good closed-loop response. Some simulation case studies are used to illustrate these aspects.     

Brazilian articles in international journals on Limnology

Summary  We assessed the contribution of Brazilian limnologists (freshwater ecologists) in international journals in the period 1970-2004. Brazilian contribution was low and regular in the 1970's, but increased steeply after 1980 with no signs of stabilization until the present. Articles authored by Brazilians tend to be less cited than articles authored by non-Brazilians, although this difference is reduced in co-authored articles with international researchers.  Brazilian articles are not distributed homogenously among the sub-areas of Limnology, but present some biases that can be explained by intellectual legacy. Brazil has invested since the 1970's in establishing postgraduate courses in Brazil and in the last years has turned the focus to a better qualification of these courses. We believe these are the main reasons for the conspicuous development of Brazilian Limnology.     

Forecasting with unequally spaced data by a functional principal component approach

The Principal Component Regression model of multiple responses is extended to forccast a continuous-time stochastic process. Orthogonal projection on a subspace of trigonometric functions is applied in order to estimate the principal components using discrete-time observations from a sample of regular curves. The forecasts provided by this approach are compared with classical principal component regression on simulated data.     

Towards 3D Bioprinted Spinal Cord Organoids

Three-dimensional (3D) cultures, so-called organoids, have emerged as an attractive tool for disease modeling and therapeutic innovations. Here, we aim to determine if boundary cap neural crest stem cells (BC) can survive and differentiate in gelatin-based 3D bioprinted bioink scaffolds in order to establish an enabling technology for the fabrication of spinal cord organoids on a chip. BC previously demonstrated the ability to support survival and differentiation of co-implanted or co-cultured cells and supported motor neuron survival in excitotoxically challenged spinal cord slice cultures. We tested different combinations of bioink and cross-linked material, analyzed the survival of BC on the surface and inside the scaffolds, and then tested if human iPSC-derived neural cells (motor neuron precursors and astrocytes) can be printed with the same protocol, which was developed for BC. We showed that this protocol is applicable for human cells. Neural differentiation was more prominent in the peripheral compared to central parts of the printed construct, presumably because of easier access to differentiation-promoting factors in the medium. These findings show that the gelatin-based and enzymatically cross-linked hydrogel is a suitable bioink for building a multicellular, bioprinted spinal cord organoid, but that further measures are still required to achieve uniform neural differentiation.