Suppression of phonon‐mediated hot carrier relaxation in type‐II InAs/AlAsxSb1 − x quantum wells: a practical route to hot carrier solar cells

InAs/AlAs_xSb_{1 − x} quantum wells are investigated for their potential as hot carrier solar cells. Continuous wave power and temperature‐dependent photoluminescence indicate a transition in the dominant hot carrier relaxation process from conventional phonon‐mediated carrier relaxation below 90 K to a regime where inhibited radiative recombination dominates the hot carrier relaxation at elevated temperatures. At temperatures below 90 K, photoluminescence measurements are consistent with type‐I quantum wells that exhibit hole localization associated with alloy/interface fluctuations. At elevated temperatures, hole delocalization reveals the true type‐II band alignment, where it is observed that inhibited radiative recombination due to the spatial separation of the charge carriers dominates hot carrier relaxation. This decoupling of phonon‐mediated relaxation results in robust hot carriers at higher temperatures, even at lower excitation powers. These results indicate type‐II quantum wells offer potential as practical hot carrier systems. Copyright © 2016 John Wiley & Sons, Ltd.     

A survey on nonlinear analog-to-digital converters

This paper presents a survey on Nonlinear Analog-to-Digital converters (ADC). This class of converters is extremely relevant in applications where there is a need for non-uniform quantization characteristic, for example, some specific applications in the areas of light detection, hearing aid, nuclear physics, image acquisition, communication systems, etc. This survey outlines the state-of-the-art Nonlinear ADC topologies, such as, floating point, logarithmic, piecewise linear and oversampled nonlinear converters, and discusses their performance and advantages in terms of their applications.     

Performance Evaluation of Video Streaming Over Ad Hoc Networks Using Flat and Hierarchical Routing Protocols

A performance evaluation of real time services (such as video streaming) over mobile ad-hoc networks using both hierarchical and flat routing protocols is shown in this paper. A variety of workload and scenarios, as characterized by mobility, load and size of the ad hoc network have been simulated using NS-2. We use OLSR (Optimized Link State Protocol) as the flat routing protocol and our own implementation of HOLSR (Hierarchical OLSR)—which uses HNA (Host and Network Association) messages—as the hierarchical one, modifying other previous HOLSR version and maintaining the maximum compatibility with the flat OLSR. We carry out a complete comparison between these protocols focused on video evaluation. The simulation lets us compare the quality of service (QoS) of the video streaming paying attention to objective parameters (PSNR, packet delivery ratio, packet delay and interruptions). Some drawbacks of the hierarchical environment are also analyzed, as the link load between cluster heads and the lack of QoS-state-aware in HOLSR design. Quantitative results indicate that the protocol overhead is reduced (more than 40% in larger networks) and the video quality is improved (from 1 to 6 dB in certain cases) using hierarchical protocols.     

Design and Test of a Certifiable ASIC for a Safety-Critical Gas Burner Control System

The purpose of this paper is to present a methodology and tools for the design and test of an EN298 compliant ASIC chip for a safety-critical gas burner control system. Safe operation, as far as the critical variable is concerned, is guaranteed in the presence of two simultaneous faults. Emphasis is put on circumventing methodology, EDA (Electronic Design Automation) and foundry limitations and on product certification requirements.     

Second-order statistics of maximal-ratio and equal-gain combining in Weibull fading

Exact expressions for the level crossing rate and average fade duration of M-branch equal-gain and maximal-ratio combining systems in a Weibull fading environment are presented. The expressions apply to unbalanced, nonidentical, independent diversity channels. In addition, new closed-form solutions for some special cases are obtained.     

High-voltage LDMOS transistors fully compatible with a deep-submicron 0.35 μm CMOS process

This work presents the design of LDMOS transistors fully compatible with a standard CMOS process, only requiring mask layout manipulation. A conventional 0.35 μm CMOS process was elected to demonstrate the viability of the approach. The prototyped LDMOS transistor exhibits a breakdown voltage of 24 V, which represents an improvement of 31% when compared with the high-voltage extended-drain NMOS available in the process library, while other static parameters remain in the same range. Furthermore, this solution enables the CMOS integration of a high-voltage pass-transistor, as a consequence of the formation of an isolated lightly doped p-type region inside the n-well.     

Conjugated Polymers: High‐Resolution Scanning Near‐Field Optical Lithography of Conjugated Polymers (Adv. Funct. Mater. 17/2010)

The fabrication of high‐resolution nanostructures in both poly(p‐phenylene vinylene), PPV, and a crosslinkable derivative of poly(9,9′‐dioctylfluorene), F8, using scanning near‐field optical lithography, is reported. The ability to draw complex, reproducible structures with 65000 pixels and lateral resolution below 60 nm (< λ/5) is demonstrated over areas up to 20 μm × 20 μm. Patterning on length‐scales of this order is desirable for realizing applications both in organic nanoelectronics and nanophotonics. The technique is based on the site‐selective insolubilization of a precursor polymer under exposure to the confined optical field present at the tip of an apertured near‐field optical fiber probe. In the case of PPV, a leaving‐group reaction is utilized to achieve insolubilization, whereas the polyfluorene is insolubilized using a photoacid initiator to create a crosslinked network in situ. For PPV, resolubilization of the features is observed at high exposure energies. This is not seen for the crosslinked F8 derivative, r‐F8Ox, allowing us to pattern structures up to 200 nm in height.     

Understanding and Predicting Data Hotspots in Cellular Networks

The unprecedented growth in mobile data usage is posing significant challenges to cellular operators. One key challenge is how to provide quality of service to subscribers when their residing cell is experiencing a significant amount of traffic, i.e. becoming a traffic hotspot. In this paper, we perform an empirical study on data hotspots in today’s cellular networks using a 9-week cellular dataset with 734K+ users and 5327 cell sites. Our analysis examines in details static and dynamic characteristics, predictability, and causes of data hotspots, and their correlation with call hotspots. We show that using standard machine learning methods, future hotspots can be accurately predicted from past observations. We believe the understanding of these key issues will lead to more efficient and responsive resource management and thus better QoS provision in cellular networks. To the best of our knowledge, our work is the first to empirically characterize traffic hotspots in today’s cellular networks.     

On traffic scaling transformation at ingress optical burst switches

Ingress nodes in optical burst switching (OBS) networks are responsible for assembling burst from incoming packets and forwarding these bursts into the OBS network core. Changes in the statistical characteristics of a traffic stream at an ingress switch can affect the capacity of the network to provide quality of service. Therefore, the statistical characteristics of the output flow of an ingress node must be known for appropriate network dimensioning. This paper evaluates the impact of burst assembly mechanisms on the scaling properties of multifractal traffic flows. Results show that the factor most relevant in determining the nature of the output traffic flow is the relationship between the cut-off time scale of the input traffic and the time scale of assembly threshold. Moreover, a procedure for the detection of the cut-off scale of incoming traffic is introduced.