Interaction between copper chloride and caffeine as seen by diffusion at 25 °C and 37 °C

A Taylor dispersion method is used to measure ternary mutual diffusion coefficients (D₁₁, D₂₂, D₁₂ and D₂₁) for aqueous solutions of CuCl₂ (1) + caffeine (2) + H₂O-(3) at 25 °C and 37 °C at carrier concentrations from (0.000 to 0.020 mol dm⁻³), for each solute, respectively. The results are compared with these obtained for the binary systems, that is, CuCl₂ (1) + H₂O (2) and caffeine (1) + H₂O (2), also reported here. From these data it is possible to make conclusions about the influence of the caffeine solutes in diffusion of copper chloride.     

Metabolic profiling of liver from hypercholesterolemic pigs fed rye or wheat fiber and from normal pigs. High-resolution magic angle spinning 1H NMR spectroscopic study

This study presents the first application of a high-resolution magic angle spinning 1H NMR approach to elucidate the metabolic effects of a hypercholesterolemic condition and two high-fiber diets based on rye and wheat bread, respectively, in intact pig liver biopsy samples. Standard 1D and spin-echo 1H spectra were acquired on a total of 20 biopsy samples, and 2D total correlation spectroscopy experiments were carried out on selected samples for assignment of the observed resonances. Principal component analyses and partial least-squares regression discriminant analysis revealed differences in the hepatic lipid content and choline-containing compounds between normal and hypercholesterolemic pigs. In addition, the results demonstrated that the liver metabolite profile of hypercholesterolemic pigs fed a high-fiber rye bread differed from that of pigs fed high-fiber wheat bread with respect to both the lipoprotein fractions and the choline-containing compounds. These findings suggest that earlier reports on high-fiber rye diet-induced effects on plasma HDL/LDL content partially can be ascribed to effects on liver cholesterol metabolism and that the hepatic phospholipase pathways of phosphatidylcholine breakdown are affected by the high-fiber rye diet.     

A measurement system for odor classification based on the dynamic response of QCM sensors

In this paper, an innovative measurement system for odor classification, based on quartz crystal microbalances (QCMs), is presented. The application proposed in this paper is the detection of typical wine aroma compounds in mixtures containing ethanol. In QCM sensors, the sensitive layer is, e.g., a polymeric layer deposited on a quartz surface. Chemical mixtures are sorbed in the sensitive layer, inducing a change in the polymer mass and, therefore, in the quartz resonance frequency. In this paper, the frequency shift is measured by a dedicated, fully digital front-end hardware implementing a technique that allows reducing the measurement time while maintaining a high-frequency resolution . The developed system allows, therefore, measuring variations of the QCM resonance frequency shifts during chemical transients obtained with abrupt changes in odor concentration. Hence, the reaction kinetics can be exploited to enhance the sensor selectivity. In this paper, some measurements obtained with an array of four sensors with different polymeric sensitive layers are presented. An exponential fitting of the transient responses is used for feature extraction. Finally, to reduce data dimensionality, principal component analysis is used.     

Effects of two chelating agents (EDTA and DTPA) on the autochthonous vegetation of a soil polluted with Cu, Zn and Cd

Chelating agents are thought to be useful for the remediation of metal-polluted soils with adequate organic matter, but the effects of these substances on the plants or seed bank of plant communities that occur in the soils are relatively unknown. In this work, the effects of two chelating substances (EDTA and DTPA) on a wet grassland plant community affected by the presence of the abandoned copper mine "Fernandito" (Garganta de los Montes, Madrid) were compared. A microcosm bioassay (6 months) was designed using the soil's top layer containing the grassland's seed bank. This soil showed a high Cu pollution level, significant contents of Zn and Cd (1120, 190, and 15 ppm, respectively), a pH of 5 and an OM content of 6.2%. The soil was subjected to three different treatments: a) untreated soil (control), b) the addition of 1 g/kg EDTA, or of c) 1 g/kg DTPA. The results presented here are those related to the plant cover, species richness, aboveground and subterranean biomass and chemical composition of the most abundant plants. Neither EDTA nor DTPA caused intense negative effects on the plants rather they significantly increased the amount of copper accumulated in aboveground parts and roots. In particular, Agrostis castellana and Corrigiola telephiifolia extracted high amounts of copper when grown in the soil with added EDTA, although they showed some nutritional imbalances (lower P contents). In contrast, lower metal concentrations were detected in plants grown in the DTPA amended soil.     

The Influence of High Temperature Exposure on the Wear Performance of a Ni Based Alloy PTA Coating

Degradation phenomena like wear and corrosion, may have their effects accelerated as components operate at high temperature. The aim of this work is to make an indirect evaluation of the influence of high temperature exposure on wear behavior of Ni coatings. A Ni-Cr-Mo-W alloy, was deposited with Plasma Transferred Arc (PTA) process. An indirect approach based on the Ahrrenius relationship was used to evaluated long time exposures at high temperatures. To simulate longer exposures at lower temperatures, coatings were exposed to higher temperatures for the same time interval. So coatings were soaked in an air furnace at 650℃, 1000℃ and 1200℃. Metal/metal wear behavior was evaluated by pin-on-disc tests. Pins were removed from the coatings by eletrodischarge machining and rubbed against a VC31 quenched and tempered tool steel. Two sets of wear tests were run at 2m/s, for different loads (0.5, 1.0, 2.0 and 3.0Kg) and for different sliding distances (120, 720, 1080, 1440 and 1800m).Coatings characterization was done by scanning electronic microscopy and Vickers microhardness. Results showed as temperature is increased, coatings wear performance is altered,and this is associated with microstructural changes.     

Ni/Al Intermetallics Plasma Transferred Arc Processing

TAILORING COMPONENT SUFACES for elevatedtemperature operations has been a goal of researchersduring the last century.Process and material selectionare the key factors for this development.In particularlythe latter can be described to have started with thedevelopment of stainless steels.Ni and Co based alloys,the superalloys,attended the increasing technologicaldemands for higher service temperatures(1).Morerecently the higher operating temperatures ofequipments,such as gas turbines,r…     

Alternative technique for hydroxyapatite coatings

Flame Assisted Chemical Vapor Deposition (FACVD), a novel technique that shows an enormous potential in porous oxides deposition, was employed for the first time aiming to obtain hydroxyapatite (HA) coatings on 316 L stainless steel metallic substrates. Calcium acetate and ammonium phosphate diluted in ethanol were employed as precursor salts. A Ca/P molar ratio of 1.66 was employed in precursor solution, which is equivalent to stoichiometric hydroxyapatite. A porous coating, formed by an open and interconnected network, was observed by scanning electronic microscopy (SEM) and associated with homogenous reactions. Thickness of hydroxyapatite coating was 412 ± 3 μm. X-ray diffraction (XRD) analysis indicated the presence of crystalline coatings, mainly constituted by hydroxyapatite phase and traces of tricalcium phosphate (β-TCP). Carbonate in the hydroxyapatite coatings was identified by Fourier transform-infrared (FTIR) spectroscopy.     

Protective effect of estrogens and catecholestrogens against peroxidative membrane damagein vitro

The antioxidant effects of natural estrogens (estrone E₁; 17β-estradiol), synthetic estrogens (17α-ethynylestradiol, EE₂; mestranol, MES; diethylstilbestrol, DES) and catechle-strogens (2-hydroxyestradiol; 4-hydroxyestradiol 4-OHE₂) on lipid peroxidation induced by different means in rat liver microsomes were investigated. The extent of lipid peroxidation was determined by measuring thiobarbituric acid reactive substances. Prooxidants included Fe³⁺/ADP/reduced NADPH, Fe²⁺/ascorbate,tert-butyl hydroperoxide (t-BOOH) and 2,2′-azobis (2-amidinopropane) (AAPH). Estrogens and catecholestrogens decreased lipid peroxidation in all four systems tested. In the iron/ascorbate model it was shown that (i)-OHE₂ and DES had analogous patterns of inhibition, irrespective of the presence of NADPH or the functional integrity of the microsómes, and (ii) the antioxidant activities of E₁, EE₂ and MES were dependent on the assay conditions with the activity being markedley higher when estrogen metabolism was favored. When peroxidation was initiated by the peroxyl radical generator AAPH, the inhibitory effects observed were least pronounced. Our data also showed that, in each of the systems, all inhibitors displayed the same order of inhibitory potency with DES and catecholestrogens being the most potent antioxidants under all experimental conditions used. The present results confirm earlier findings and point toward a link between estrogen metabolism and estrogen antioxidant activity. The data also indicate that estrogens and catecholestrogens interact with the peroxidative process at different levels with their interactions with iron or the metal-derived species being the most important modes of inhibition.     

Investigation on the styrene-butadiene rubber cleavage with periodic acid under the influence of ultrasonic radiation

Summary The cleavage of styrene-butadiene rubber (SBR) with periodic acid (H₅IO₆) and simultaneous injection of ultrasonic radiation has been performed. Two frequencies, 25 and 40 kHz, respectively, have been used. The results demonstrate clearly that 40 kHz ultrasound radiation accelerates significantly the cleavage reaction. The Pearl String Model theory had been used to elucidate this process.