Modification and abolition of re-entry within the His-Purkinje system in man by diphenylhydantoin

The phenomenon of macrore-entry (Re) within the His-Purkinje system (HPS) was consistently observed in 10 of 19 patients during retrograde refractory period studies. Effects of intravenous infusion of diphenylhydantoin (DPH) on Re were studied in these 10 patients 10 minutes after completion of infusion (mean plasma level equal to 17.0 microgram/ml). Diphenylhydantoin modified determinants of Re in seven patients (group I) and abolished Re in the remaining three patients (group II). In group I, DPH shortened the critical V1 V2 from 310.0 +/- 30.5 to 292.9 +/- 25.6 msec (P less than 0.025) and critical V2 H2 intervals for Re from 201.4 +/- 18.4 to 185.0 +/- 13.8 msec (P greater than 0.05). In group II, DPH abolished Re in two of three patients by precluding attainment of critical V2 H2 intervals whereas Re was abolished in the remaining one patient despite attainment of critical V2 H2 intervals (vs control). For both groups, DPH significantly shortened functional and effective refractory periods of the HPS (P less than 0.001 and less than 0.01, respectively) without significantly affecting the effective refractory period of the ventricular muscle. Diphenylhydantoin either completely abolished or significantly shortened the retrograde gap zones in the HPS. It is concluded that diphenylhydantoin significantly shortens His-Purkinje system refractoriness, abolishing Re in the patients with higher degree of improvement in refractoriness.     

Uroporphyria induced by 5-aminolaevulinic acid alone in Ahrd SWR mice

In mice, depression of hepatic uroporphyrinogen decarboxylase (UROD) leading to porphyrin accumulation (uroporphyria) occurs with chlorinated ligands of the aryl hydrocarbon (AH) receptor especially after iron overload. However, in the absence of chlorinated ligands, iron itself will eventually cause uroporphyria, but this response is not associated with the Ahr genotype. These effects are potentiated by administration of the haem precursor 5-aminolaevulinate (ALA). The aim of this study was to investigate the effects of ALA alone. Prolonged administration of 2 mg ALA/mL in the drinking water to SWR mice also led to decarboxylase insufficiency (11% of control) and uroporphyria by 8 weeks, whereas DBA/2 mice did not show reduced enzyme activity. Both strains are considered AH nonresponsive and analysis of the Ahr gene using restriction fragment length polymorphism was consistent with SWR, like DBA/2, possessing the Ahrd allele. Exposure of isolated hepatocytes to ALA (150-500 microM) for up to 48 hr showed a significant accumulation of both uroporphyrin and coproporphyrin in the medium, which for uroporphyrin particularly was significantly greater with SWR than with DBA/2 cells. Basal in vivo CYP1A2 activity, measured as microsomal methoxyresorufin dealkylation, was significantly greater in SWR than in DBA/2 mice (1.3-fold), but it was unclear whether this was sufficient to explain the marked difference in sensitivities of the two strains. Despite SWR mice being AH nonresponsive, uroporphyria and decarboxylase depression after an initial iron overload and ALA for 3 weeks were greatly potentiated by a single dose (100 mg/kg) of hexachlorobenzene (a weak AH ligand). The results demonstrate that there is a genetic difference in mice independent of the Ahr genotype and response to iron, which influences the susceptibility to ALA-induced uroporphyria. Thus chemicals, iron and ALA can act independently, but also together, to cause porphyria in susceptible individuals.     

A finite element study of the effect of the angle between two intersecting cylindrical shells subjected to internal pressure

The results of a study of the critical region of two intersecting cylindrical shells due to internal pressure loading are presented as a function of the angle between the two axes. The investigation was performed using the thin shell element of a three-dimensional finite element program. Three models with the angle between the axes of the two cylindrical shells equal to 30, 60, and 90°, were analyzed. In all of the three models, the diameter ratio of the two shells was 0.5283; the diameter to thickness ratio of the larger or main shell was 44.76, while the same ratio for the smaller or attached shell was 15.487. The results of these analyses show that the stresses in the critical intersection region are least when the two axes are perpendicular to each other; for other angular configurations, the stresses increase as the acute angle between the two axes decrease. This effect of inclination for pressure loading is just opposite of the effect found by authors [1] for external moments. In that case, for in-plane as well as out-ofplane moments, the stresses are larger for normally intersecting shells as compared to other angular configurations.     

Efficient conversion of light paraffinic naphtha to aromatics over metal-modified Mo/MFI catalysts

Journal of Porous Materials - The transformation of light naphtha to value-added aromatic compounds is gaining momentum in the petrochemical industry. In this work, a series of metal modified...     

Boosted hydrogen evolution activity from Sr doped ZnO/CNTs nanocomposite as visible light driven photocatalyst

CNTs were decorated onto Sr doped ZnO nanoparticles to construct an efficient photocatalyst via a facile sol-gel method. The as-fabricated Sr doped ZnO/CNTs with recyclability exhibits Sr and CNTs content dependent hydrogen evolution activit under visible light illumination. The Sr doped ZnO/CNTs photocatalyst shows the highest hydrogen evolution rate of 2732.2 μmolh^?1g^?1, which is 33.7 and 2.83 times higher than pure ZnO and Sr doped ZnO photocatalysts, respectively. The improved hydrogen evolution activity of Sr doped ZnO/CNTs is primarily assigned to high surface area, Sr doping and construction of heterojunction, which can extend the light absorption, decrease the optical band gap and improve the charge separation. Moreover, the underlying photocatalytic mechanism is proposed on the basis of Mott-Schottky study and explains the interfacial charge transfer process from ZnO to CNTs and Sr. This work open new strategies to synthesize CNTs based nanocomposite for hydrogen evolution.     

A critical review on self-lubricating ceramic-composite cutting tools

Self-lubricating ceramic cutting tools have recently gained considerable attention as the tool wear in cutting hard-to-cut materials greatly affects the production cost, integrity of the machined surface, and productivity. In an attempt to compile the progress made in this important research area, a critical review has been performed covering a range of aspects. These include the current research trends and the need for self-lubricating ceramic tools, identification of prospective high-temperature solid lubricants and their limitations followed by a presentation of recent experimental and numerical work conducted related to self-lubricant ceramic cutting tools. Various lubrication mechanisms involved in the cutting process are also examined to identify general tribological response under various tribo-systems, which is expected to provide useful directions for the researchers and cutting industry. The current and emerging synthesis techniques are discussed in detail and compared with respect to ceramic cutting tools. Finally, some research gaps and future directions are suggested that could lead to optimum design and development of innovative self-lubricating ceramic tools.     

Metal Drain Double-Gate Tunnel Field Effect Transistor with Underlap: Design and Simulation

Silicon - In this paper, we propose and simulate a novel double gate tunnel field effect transistor (DG-TFET) employing a metallic drain and a gate-drain underlap. The use of a metallic drain and...