Rheological and extrusion characteristics of glass fiber-reinforced polycarbonate

An experimental investigation of the rheological properties of glass fiber-reinforced polycarbonate melts and the extrusion of such compounds through capillary and slit dies is presented. The viscosity–shear rate function seems independent of instrument for cone-plate and capillary investigations. The presence of fibers increases the level of the viscosity. Normal stresses at fixed shear stress are also increased by the presence of fibers. The extrudate swell is decreased by the presence of fibers and surface roughness is increased. Fiber orientation increases and surface roughness decreases with increasing extrusion rate.     

Comparison of different flowability tests for powders for inhalation

A series of placebo powders for inhalation was characterized regarding bulk density and powder flowability using different techniques. The powders were of the ordered mixture type and were prepared by mixing a pharmaceutical carrier grade of lactose with different fractions of intermediate sized and fine (i.e., micronized) lactose. A modified Hausner Ratio was obtained by measurement of the poured and the compressed bulk densities. Other tests investigated were the angle of repose, the avalanching behaviour using the AeroFlow, and the yield strength using the Uniaxial tester. Furthermore, the relation between ordered mixture composition and flowability was examined.Of the methods investigated, the modified Hausner Ratio discriminates well between the investigated powders and seems to have the widest measuring range. It was also found that the poured and compressed bulk densities provide information about the packing of the particles in the powders. A good correlation was obtained between the modified Hausner Ratio and the angle of repose. The AeroFlow was suitable for powders with a low percentage of fine particles, but could not discriminate between the more cohesive powders. The Uniaxial tester, on the other hand, seems to be better suited for more cohesive powders.Regarding the powder composition, addition of micronized particles has a strong influence on the flowability of ordered mixtures, while intermediate sized particles have little impact on the powder flow.     

Application of particle swarm optimization in epileptic spike EEG source localization

Surgical therapy has become an important therapeutic alternative for patients with medically intractable epilepsy. Correct and anatomically precise localization of an epileptic focus is essential to decide if resection of brain tissue is possible. The inverse problem in EEG-based source localization is to determine the location of the brain sources that are responsible for the measured potentials at the scalp electrodes. We propose a new global optimization method based on particle swarm optimization (PSO) to solve the epileptic spike EEG source localization inverse problem. In a forward problem a modified subtraction method is proposed to reduce the computational time. The good accuracy and fast convergence are demonstrated for 2D and 3D cases with realistic head models. The results from the new method are promising for use in the pre-surgical clinic in the future.     

Fixed-Parameter Complexity of Minimum Profile Problems

The profile of a graph is an integer-valued parameter defined via vertex orderings; it is known that the profile of a graph equals the smallest number of edges of an interval supergraph. Since computing the profile of a graph is an NP-hard problem, we consider parameterized versions of the problem. Namely, we study the problem of deciding whether the profile of a connected graph of order n is at most n−1+k, considering k as the parameter; this is a parameterization above guaranteed value, since n−1 is a tight lower bound for the profile. We present two fixed-parameter algorithms for this problem. The first algorithm is based on a forbidden subgraph characterization of interval graphs. The second algorithm is based on two simple kernelization rules which allow us to produce a kernel with linear number of vertices and edges. For showing the correctness of the second algorithm we need to establish structural properties of graphs with small profile which are of independent interest. A preliminary version of the paper is published in Proc. IWPEC 2006, LNCS vol. 4169, 60–71.     

Shaping stable periodic motions of inertia wheel pendulum: theory and experiment

We consider an underactuated two‐link robot called the inertia wheel pendulum. The system consists of a free planar rotational pendulum and a symmetric disk attached to its end, which is directly controlled by a DC‐motor. The goal is to create stable oscillations of the pendulum, which is not directly actuated. We exploit a recently proposed feedback‐control design strategy based on motion planning via virtual holonomic constraints. This strategy is shown to be useful for design of regulators for achieving orbitally exponentially stable oscillatory motions. The main contribution is a step‐by‐step procedure on how to achieve oscillations with pre‐specified amplitude from a given range and an arbitrary independently chosen period. The theoretical results are verified via experiments with a real hardware setup. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Additive Manufacturing of Hard Magnetic Passive Shims to Increase Field Homogeneity of a Halbach Magnet

Obtaining a highly homogeneous magnetic field is desired for field-controlled applications. For example, the resolution of magnetic analysis methods can be improved by generating a stronger and more homogeneous field over the region of interest (ROI). A set of 3D-printed passive shims is fabricated using additive manufacturing to improve the magnetic field homogeneity of a Halbach magnet assembly. The feedstock is a custom acrylonitrile butadiene styrene (ABS)-hard magnet composite filament filled with 60% wt. isotropic NdFeB. Additionally, a method for investigating the remanence is developed and validated. The result reveals a good agreement between the new method and existing measurement techniques for the remanence of permanent magnets. It is also shown that the additive manufacturing procedure has negligible effects on the magnetic properties. Performing a parametric study over a rectangular ROI, an optimized shim configuration is achieved. In the optimized and 3D-printed configuration, the average norm of the magnetic flux density, B_norm, is increased by 13% and, more importantly, a 43% increase in the magnetic uniformity is obtained. These results highlight the great potential of freeform manufacturing, namely, additive manufacturing, to tailor the properties of magnet structures.     

Automated extraction of DNA from blood and PCR setup using a Tecan Freedom EVO liquid handler for forensic genetic STR typing of reference samples

We have implemented and validated automated protocols for DNA extraction and PCR setup using a Tecan Freedom EVO liquid handler mounted with the Te-MagS magnetic separation device (Tecan, M?nnedorf, Switzerland). The protocols were validated for accredited forensic genetic work according to ISO 17025 using the Qiagen MagAttract DNA Mini M48 kit (Qiagen GmbH, Hilden, Germany) from fresh whole blood and blood from deceased individuals. The workflow was simplified by returning the DNA extracts to the original tubes minimizing the risk of misplacing samples. The tubes that originally contained the samples were washed with MilliQ water before the return of the DNA extracts. The PCR was setup in 96-well microtiter plates. The methods were validated for the kits: AmpF?STR Identifiler, SGM Plus and Yfiler (Applied Biosystems, Foster City, CA), GenePrint FFFL and PowerPlex Y (Promega, Madison, WI). The automated protocols allowed for extraction and addition of PCR master mix of 96 samples within 3.5h. In conclusion, we demonstrated that (1) DNA extraction with magnetic beads and (2) PCR setup for accredited, forensic genetic short tandem repeat typing can be implemented on a simple automated liquid handler leading to the reduction of manual work, and increased quality and throughput.     

Betweenness parameterized above tight lower bound

We study ordinal embedding relaxations in the realm of parameterized complexity. We prove the existence of a quadratic kernel for the Betweenness problem parameterized above its tight lower bound, which is stated as follows. For a set V of variables and set C of constraints “vi is between vj and vk”, decide whether there is a bijection from V to the set {1,…,|V|} satisfying at least |C|/3+κ of the constraints in C. Our result solves an open problem attributed to Benny Chor in Niedermeier's monograph “Invitation to Fixed-Parameter Algorithms”. The betweenness problem is of interest in molecular biology. An approach developed in this paper can be used to determine parameterized complexity of a number of other optimization problems on permutations parameterized above or below tight bounds.