Transparent Plasmonic Nanowire Electrodes via Self‐Organised Ion Beam Nanopatterning

A self‐organised approach for the synthesis of transparent metal nanowire arrays is based on defocused ion beam sputtering. The nanowire arrays, supported on low‐cost dielectric substrates (glass slides), feature a dual functionality: they exhibit anisotropic conductivity, with sheet resistances which are reduced in comparison to those of transparent conductive oxides, and additionally they support localised plasmon resonances. The latter represents an attractive feature in view of plasmon enhanced photon harvesting applications, in which the nanostructured metal electrodes are employed as an alternative to conventional transparent conductive oxides.     

Experimental study of dry reforming of biogas in a tubular anode-supported solid oxide fuel cell

The performance of a tubular Ni/YSZ anode supported SOFC directly fed by an anaerobic digestion simulated biogas, with an extra addition of carbon dioxide to operate in conservative operating conditions to avoid coking on the anode support, was investigated. The fuel cell has been tested at a fixed oven temperature of 800 °C and under biogas/CO₂ mixtures with different volumetric ratios, fuel utilization (FU) and current densities. Polarization curves and performance maps were obtained to better understand the influence of the investigated operational parameters on the cell behavior. Furthermore, since the tubular geometry enables an easy separation of the anode and cathode exhaust gases, the anode off-gas has been collected and monitored through a gas-chromatograph under open circuit voltage to investigate on the catalytic behavior of a Ni-based state-of-the-art anode. For corresponding operative conditions, performances of the cell for biogas/CO₂ 1/1.5 (i.e. CH₄/CO₂ 30/70) and 1/2 (i.e. CH₄/CO₂ 24/76) were at least 2% and 4% lower than the case 1/1 (i.e. CH₄/CO₂ 20/80), respectively. The highest efficiency of 43.4% was reached at 17.5 A and FU = 70%.     

Base effects on electrochemical oxidation of indoline

The electrooxidation of indoline was studied as the first step in exploring its utility as a model liquid hydrogen carrier. Electrochemical oxidation of indoline in the presence of nitrogen-containing bases resulted in a cathodic shift in the onset of the oxidation. A linear correlation was found between the pK_a of the base and the magnitude of the cathodic shift of indoline oxidation. A hydrogen bonding complex model is proposed to account for this effect, and ¹H NMR spectroscopy and cyclic voltammetry experiments were conducted to support this proposed mechanism.     

Model for the final decarburisation of the steel bath through a self-bubbling effect

The decarburisation in the basic oxygen furnace is certainly the chemical process ruling the conversion of pig iron into steel and for the production of high deep drawability steel s. At the end of conversion, the steelmakers have often to blow again to achieve the targeted low values of carbon concentration. This further blowing process implies a productivity loss, even it is not strictly needed because the self-bubbling of the metal bath due to the CO formation can allow setting the carbon concentration within the required chemical range. Actually, due to the high temperatures and oxygen activity at the end of the blowing process, the decarburisation process keeps moving up to the equilibrium. The present study describes and validates a chemical-physical model based on thermodynamic and kinetic aspects that allow the steelmakers to forecast when exploiting the self-bubbling phenomenon avoiding the re-blow, increasing the productivity and the refractories working life.     

Upgrading the data acquisition and control systems of the European Breeding Blanket Test Facility

The EBBTF (European Breeding Blanket Test Facility) experimental plant is a key component for the development of the breeding blankets (TBMs test blanket modules, HCLL helium cooled lithium lead and HCPB helium cooled pebble bed types) used by ITER. EBBTF is an experimental plant which provides the double breeding/cooling loops (liquid metal and gas) required for HCLL testing. EBBTF is composed of four subsystems (TBM, IELLLO integrated European lead lithium loop, HE-FUS3 helium fusion loop, version 3 and helium compressor build by ATEKO) with dedicated control systems realized with hardware/software combinations covering 15 years (1995–2010) time span. At the end of 2010 we began to upgrade the HE-FUS3 data acquisition control systems (DACS) replacing the obsolete PLC Siemens S5 with National Instruments Compact FieldPoint and LabVIEW. The control room has been completely reorganized using high resolution monitors and workstations linked with standard Ethernet interfaces. The data acquisition, control, safety and SCADA software has been completely developed in ENEA using LabVIEW. In this paper we are going to discuss the technical difficulties and the solutions that we have used to accomplish the upgrade.     

Heat Transfer in Water-Based SiC and TiO2 Nanofluids

The article reports the results of heat transfer experimental tests on water-based TiO₂ (9 wt%) and SiC (3, 6, 9 wt%) nanofluids. Measurements were performed in a two-loop test rig for immediate comparison of the thermal performances of the nanofluid with the base fluid. The convective heat transfer is evaluated in a circular pipe heated with uniform heat flux (from 20 to 240 kW/m²) and flow regimes from laminar to turbulent. Tests have been performed to compare the heat transfer of nanofluids and water at the same velocity (from 0.7 to 1.6 m/s) or Reynolds number (from 300 to 6000), and they have also been compared with values calculated from some of the most widely used correlations. The analysis of the experimental data shows a strong dependence on the parameter used, while both the nanofluid and water data have the same agreement with the calculated values. Nanofluids were manufactured through a two-step procedure: laser synthesis of nanoparticles followed by dispersion in water.     

Energy saving in existing buildings by an intelligent use of interoperable ICTs

In this paper, we report a methodology, developed in the context of Smart Energy Efficient Middleware for Public Spaces European Project, aimed at exploiting ICT monitoring and control services to reduce energy usage and CO₂ footprint in existing buildings. The approach does not require significant construction work as it is based on commercial-off-the-shelf devices and, where present, it exploits and integrates existing building management systems with new sensors and actuator networks. To make this possible, the proposed approach leverages upon the following main contributions: (a) to develop an integrated building automation and control system, (b) to implement a middleware for the energy-efficient buildings domain, (c) to provide a multi-dimensional building information modelling-based visualisation, and (d) to raise people’s awareness about energy efficiency. The research approach adopted in the project started with the selection, as case studies, of representative test and reference rooms in modern and historical buildings chosen for having different requirements and constraints in term of sensing and control technologies. Then, according to the features of the selected rooms, the strategies to reduce the energy consumptions were defined, taking into account the potential savings related to lighting, heating, ventilation, and air conditioning (HVAC) systems and other device loads (PC, printers, etc.). The strategies include both the control of building services and devices and the monitoring of environmental conditions and energy consumption. In the paper, the energy savings estimated through simulation, for both HVAC and lighting, are presented to highlight the potential of the designed system. After the implementation of the system in the demonstrator, results will be compared with the monitored data.     

Study of Electroless Copper Deposition on Fe Powder

The electrolytic deposition of an electropositive metal is often accompanied by electroless deposition. However, this process is very difficult to control. For that reason, our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The process consists of two partial reactions; solid iron substrate dissolves into the solution, thus providing the electrons necessary for reduction of copper. The course of the electroless process depends to a large extent on the composition and pH of the electrolyte as well as on the size and concentration of the iron powder particles in the electrolyte. In order to suppress the spontaneous electroless deposition of copper, sodium citrate as complexing agent was used. The following parameters were determined to characterize the reaction course: the heterogeneous rate constant of Fe powder dissolution and degree of Fe conversion as well as thickness of the Cu layer on the Fe powder, both of the latter evaluated upon attaining the stationary state. The main influence exhibited on the reaction course is the efficient surface area available for electroless deposition.     

Carbonic anhydrase inhibitors: design of membrane-impermeant copper(II) complexes of DTPA-, DOTA-, and TETA-tailed sulfonamides targeting the tumor-associated transmembrane isoform IX

The synthesis and carbonic anhydrase (CA, EC 4.2.1.1) inhibitory activity of two series of aromatic sulfonamides and their Cu(II) derivatives, incorporating metal-complexing moieties of the DTPA, DOTA, and TETA type are reported. The new compounds were designed in such a way as to possess high affinity for Cu(II) ions, exploiting four pendant carboxylate moieties in the DTPA derivatives, as well as the cyclen/cyclam macrocyles, and three pendant acetate moieties in the DOTA and TETA derivatives. The new derivatives showed modest inhibition of the cytosolic isoform CA I (K(I) values in the range of 66-2130 nM), were better CA II inhibitors (K(I) values in the range of 21-360 nM), and excellent inhibitors of the tumor-associated isoform CA IX (K(I) values in the range of 4.1-110 nM), with selectivity ratios for the inhibition of the tumor (CA IX) over the cytosolic (CA II) isozyme in the range of 10.74-20.88 for the best derivatives. Copper complexes were more inhibitory than the corresponding ligand sulfonamides, and showed membrane impermeability, thus, having the possibility to specifically target the transmembrane CA IX that has an extracellular active site. Incorporation of radioactive copper isotopes in this type of CA inhibitor may lead to interesting diagnostic/therapeutic applications for such compounds.     

Generation of carrier peptides for the delivery of nucleic acid drugs in primary cells

Now that the human genome has been decoded, the demand for novel therapeutic concepts, such as gene and stem cell therapy, is higher than ever before. Although new and better pharmaceutical agents are available, their efficient delivery to the intracellular site of action is still a serious challenge. A possible solution to this problem is the use of cell-penetrating peptides as delivery vectors, including derivatives of human calcitonin (hCT). The aim of this study was to synthesise novel branched hCT-derived peptides for the noncovalent delivery of nucleic acids. The uptake of the resulting oligocationic peptides into various cell lines as well as primary cells was monitored by fluorescence microscopy. To determine the appropriate peptide-plasmid charge ratios for efficient cell transfection, electromobility shift assays were carried out. Finally, flow cytometric and fluorescence microscopic studies of gene expression highlighted two novel hCT-derived peptides as highly effective in the delivery of noncovalently complexed plasmid DNA. Thus, the absence of cytotoxicity paired with highly efficient cell internalisation and transfection rates, in primary cells as well, make both peptides powerful candidates as drug delivery vectors, especially for plasmid DNA, for both in vivo and ex vivo therapeutic applications.