Predictive Validity of an Empirical Approach for Selecting Promising Message Topics: A Randomized‐Controlled Study

Several message topic selection approaches propose that messages based on beliefs pretested and found to be more strongly associated with intentions will be more effective in changing population intentions and behaviors when used in a campaign. This study aimed to validate the underlying causal assumption of these approaches which rely on cross‐sectional belief–intention associations. We experimentally tested whether messages addressing promising themes as identified by the above criterion were more persuasive than messages addressing less promising themes. Contrary to expectations, all messages increased intentions. Interestingly, mediation analyses showed that while messages deemed promising affected intentions through changes in targeted promising beliefs, messages deemed less promising also achieved persuasion by influencing nontargeted promising beliefs. Implications for message topic selection are discussed.     

3D Printable One-Part Carbon Nanotube-Elastomer Ink for Health Monitoring Applications

3D printing of conductive elastomers is a promising route to personalized health monitoring applications due to its flexibility and biocompatibility. Here, a one-part, highly conductive, flexible, stretchable, 3D printable carbon nanotube (CNT)-silicone composite is developed and thoroughly characterized. The one-part nature of the inks: i) enables printing without prior mixing and cures under ambient conditions; ii) allows direct dispensing at ≈100 µm resolution printability on nonpolar and polar substrates; iii) forms both self-supporting and high-aspect-ratio structures, key aspects in additive biomanufacturing that eliminate the need for sacrificial layers; and iv) lends efficient, reproducible, and highly sensitive responses to various tensile and compressive stimuli. The high electrical and thermal conductivity of the CNT-silicone composite is further extended to facilitate use as a flexible and stretchable heating element, with applications in body temperature regulation, water distillation, and dual temperature sensing and Joule heating. Overall, the facile fabrication of this composite points to excellent synergy with direct ink writing and can be used to prepare patient-specific wearable electronics for motion detection and cardiac and respiratory monitoring devices and toward advanced personal health tracking and bionic skin applications.     

A Novel Metal-Rich Anneal for In Vacuo Passivation of High-Aspect-Ratio Mercury Cadmium Telluride Surfaces

A new method for Cd-rich annealing of mercury cadmium telluride (MCT) was developed based on the observation that the deposition of Cd onto MCT by vacuum evaporation became self-limiting whenever the substrate temperature was above 70°C regardless of the Cd evaporation rate. Preliminary results indicated that this new method may be suitable for passivation of high-aspect-ratio MCT surfaces, for passivation at low temperatures, for in vacuo operation, and/or for vacancy annihilation in MCT. Furthermore, the process can be carried out in the conventional open-tube reactors used for molecular beam epitaxy, metalorganic chemical vapor deposition, and physical vapor deposition.     

DOA estimation of wideband sources without estimating the number of sources

In this paper, we propose a new technique to estimate wideband source directions from the sensor snapshots without requiring to know the number of sources present in the scenario. This work is motivated by the fact that the existing model order estimation (number of sources) techniques for wideband source scenario are either inaccurate or computationally expensive. Direction-of-arrival (DOA) estimation is realized using a beamformer framework which imposes nulls in the spatial spectrum along the source directions. The null width along the frequency axis is widened by introducing a new data dependent term into the optimization problem, thus achieving wideband capability. Furthermore, the temporal processing of the data snapshots drastically reduces the number of snapshots required for wideband DOA estimation. The effectiveness of the proposed formulation is studied with simulated experiments.     

使用Xilinx FPGA产品加速数据包处理

下一代网络架构是以10千兆以太网成熟发展和工业面向40千兆及100千兆发展为兴起的.聚集的网络为可升级的开放平台处理数据流创造了新挑战.在聚集的下一代架构基础中,常见部件包括高性能的兆兆位转换和在应用层持续增长的复杂性和迅速成长的应用中能够处理几十千兆数据流的可编程的内容处理器.CloudShield已经设计出新的一系列可编程数据包处理器,能够检验、分类,调试和复制数据包,集成与应用层的动态交互.     

Nano and Microtechnologies for the Study of Magnetotactic Bacteria

Magnetotactic bacteria (MTB) naturally synthesize magnetic nanoparticles that are wrapped in lipid membranes. These membrane‐bound particles, which are known as magnetosomes, are characterized by their narrow size distribution, high colloidal stability, and homogenous magnetic properties. These characteristics of magnetosomes confer them with significant value as materials for biomedical and industrial applications. MTB are also a model system to study key biological questions relating to formation of bacterial organelles, metal homeostasis, biomineralization, and magnetoaerotaxis. The similar size scale of nano and microfluidic systems to MTB and ease of coupling to local magnetic fields make them especially useful to study and analyze MTB. In this Review, a summary of nano‐ and microtechnologies that are developed for purposes such as MTB sorting, genetic engineering, and motility assays is provided. The use of existing platforms that can be adapted for large‐scale MTB processing including microfluidic bioreactors is also described. As this is a relatively new field, future synergistic research directions coupling MTB, and nano‐ and microfluidics are also suggested. It is hoped that this Review could start to bridge scientific communities and jump‐start new ideas in MTB research that can be made possible with nano‐ and microfluidic technologies.     

Selection criteria for the analysis of data-driven clusters in cerebral FMRI

Functional MRI (fMRI) may be possible without a priori models of the cerebral hemodynamic response. First, such data-driven fMRI requires that all cerebral territories with distinct patterns be identified. Second, a systematic selection method is necessary to prevent the subjective interpretation of the identified territories. This paper addresses the second point by proposing a novel method for the automated interpretation of identified territories in data-driven fMRI. Selection criteria are formulated using: 1) the temporal cross-correlation between each identified territory and the paradigm and 2) the spatial contiguity of the corresponding voxel map. Ten event-design fMRI data sets are analyzed with one prominent algorithm, fuzzy c-means clustering, before applying the selection criteria. For comparison, these data are also analyzed with an established, model-based method: statistical parametric mapping. Both methods produced similar results and identified potential activation in the expected territory of the sensorimotor cortex in all ten data sets. Moreover, the proposed method classified distinct territories in separate clusters. Selected clusters have a mean temporal correlation coefficient of 0.39+/-0.07 (n=19) with a mean 2.7+/-1.4 second response delay. At most, four separate contiguous territories were observed in 87% of these clusters. These results suggest that the proposed method may be effective for exploratory fMRI studies where the hemodynamic response is perturbed during cerebrovascular disease.     

Ultrahigh Efficiency Fluorescent Single and Bi‐Layer Organic Light Emitting Diodes: The Key Role of Triplet Fusion

A new family of anthracene core, highly fluorescent emitters is synthesized which include diphenylamine hole transport end groups. Using a very simple one or two layer organic light emitting diode (OLED) structure, devices without outcoupling achieve an external quantum efficiency of 6% and photonic efficiencies of 20 cd/A. The theoretical maximum efficiency of such devices should not exceed 3.55%. Detailed photophysical characterization shows that for these anthracene based emitters 2T₁≤T_n and so in this special case, triplet fusion can achieve a singlet production yield of 0.5. Indeed, delayed electroluminescence measurements show that triplet fusion contributes 59% of all singlets produced in these devices. This demonstrates that when triplet fusion becomes very efficient, fluorescent OLEDs even with very simple structures can approach an internal singlet production yield close to the theoretical absolute maximum of 62.5% and rival phosphorescent‐based OLEDs with the added advantage of much improved stability.     

先拉伸后轧制纯镍中滑移系与位错结构的关系

对柱状晶纯镍样品先拉伸后冷轧,用透射电镜和扫描电镜表征其位错结构。在拉伸变形时形成的结构在后续的轧制变形后保持或改变取决于当应变路径改变时开动的滑移系是否发生了改变。当开动的滑移系发生变化时,最终的结构由第二应变路径中开动的滑移系所决定。这些结果为支持已发表的滑移系活动与位错结构的关系提供了进一步的证明。     

A Realistic Timing Test Model and Its Applications in High-Speed Interconnect Devices

This paper extends the timing test model in [5] to be more realistic by including the effects of the test fixtures between a device under test and a tester. The paper enables analyzing the trade-offs that arise between the predicted yield and the required overall test environment timing accuracy (OTETA) which involves the tester overall timing accuracy (OTA) and the test fixtures' impacts. We specifically focus on the application of the extended model to predict the test yield of standard high-speed interconnects, such as PCI Express, Parallel/Serial RapidIO, and HyperTransport. The extended model reveals that achieving an actual yield of 80% with a test escape of 300 DPM (Defects Per Million) requires an equivalent OTETA that is about half the acceptable absolute limit of the tested parameter. Baosheng Wang received his B.S. degree from Beijing University of Aeronautics and Astronautics (BUAA), Beijing, P.R. China, in 1997 and M.S. degree from Precision Instrument & Mechanical Engineering from the Tsinghua University, Beijing, P. R. China in 2000. In 2005, he received his Ph.D. degree in Electrical Engineering from the University of British Columbia (UBC), Vancouver, BC, Canada. During his Master study, he was doing MEMS, Micro Sensors and Digital Signal processing. From 2000 to 2001, he worked in Beijing Gaohong Telecommunications Company as a hardware engineer in ATM technology. Currently, he is a Design-for-Test (DFT) engineer at ATI Technologies Inc., Markham, Ontario, Canada. He publishes widely at international conferences and journals. His primary research interests are time-driven or timing-oriented testing methodologies for System on-a-Chip (SoC). These fields include test time reduction for SRAMs, accelerated reliability test for non-volatile memories, yield analysis for SoC timing tests, SoC path delay timing characterization and embedded timing measurements. Andy Kuo is currently a Ph.D student of System on a Chip (SoC) Research Lab at the Department of Electrical and Computer Engineering, University of British Columbia. He received his M.A.Sc. and B.A.Sc in electrical and computer engineering from University of British Columbia and University of Toronto in 2004 and 2002 respectively. His research interests include high-speed signal integrity issues, jitter measurement, serial communications. Touraj Farahmand received the B.Sc. degree in Electrical Engineering from Esfahan University of Technology, Esfahan, Iran in 1989 and the M.Sc. in Control Engineering from Sharif university of Technology, Tehran, Iran in 1992. After graduation, he joined the Electrical and Computer Research center of Esfahan University of Technology where he was involved in the DSP algorithm development and design and implementation of the control and automation systems. Since October 2001, he has been working in the area of high-speed signal timing measurement at SoC (System-on-a-Chip) lab of UBC (University of British Columbia) as a research engineer. His research interests are signal processing, jitter measurement, serial communication and control. André Ivanov is Professor in the Department of Electrical and Computer Engineering, at the University of British Columbia. Prior to joining UBC in 1989, he received his B.Eng. (Hon.), M. Eng., and Ph.D. degrees in Electrical Engineering from McGill University. In 1995–96, he spent a sabbatical leave at PMC-Sierra, Vancouver, BC. He has held invited Professor positions at the University of Montpellier II, the University of Bordeaux I, and Edith Cowan University, in Perth, Australia. His primary research interests lie in the area of integrated circuit testing, design for testability and built-in self-test, for digital, analog and mixed-signal circuits, and systems on a chip (SoCs). He has published widely in these areas and holds several patents in IC design and test. Besides testing, Ivanov has interests in the design and design methodologies of large and complex integrated circuits and SoCs. Dr. Ivanov has served and continues to serve on numerous national and international steering, program, and/or organization committees in various capacities. Recently, he was the Program Chair of the 2002 VLSI Test Symposium (VTS'02) and the General Chair for VTS'03 and VTS'04. In 2001, Ivanov co-founded Vector 12, a semiconductor IP company. He has published over 100 papers in conference and journals and holds 4 US patents. Ivanov serves on the Editorial Board of the IEEE Design and Test Magazine, and Kluwer's Journal of Electronic Testing: Theory and Applications. Ivanov is currently the Chair of the IEEE Computer Society's Test Technology Technical Council (TTTC). He is a Golden Core Member of the IEEE Computer Society, a Senior Member of the IEEE, a Fellow of the British Columbia Advanced Systems Institute and a Professional Engineer of British Columbia. Yong Cho received the B.S. degree from Kyung Pook National Unviersity, Korea, in 1981 and the M.S. degree from in electrical and computer engineering from the University of South Carolina, Columbia, S.C., in 1988 and the Ph.D. degree in electrical engineering and applied physics from Case Western Reserve University, Cleveland, OH, in 1992. He is currently a Professor with the Department of Electronics Engineering, Konkuk University, Seoul, Korea. His recent research interests include SoC Design and Verification, H/W and S/W co-design, and embedded programming on SoC. Sassan Tabatabaei received his PHD in Electrical Engineering from the University of British Columbia, Vancouver, Canada in 2000. Since then, he has held several senior technical positions at Vector12 Corp, Guide Technology, and Virage Logic. His professional and research interests include mixed-signal design and test, and signal integrity and jitter test methodologies for high-speed circuits and multi-Gbps serial interfaces. He has published several papers and holds a US patent in the area of timing and jitter measurement. Currently, he holds the position of the director for embedded test at Virage Logic Corporation.