An empirical correlation for viscosity of molten salt hydrates

An empirical correlation between reduced viscosity and reduced temperature for molten salt hydrates showing Arrhenius behavior above their melting points has been reported. This correlation predicts the viscosity of molten salt hydrates at temperatures not more than 15 to 30°C above the melting points, within an accuracy of ±5%. Consistency tests for viscosity data using reduced parameters have been reported.     

Selection of a pull production control policy under different demand situations for a manufacturing system by AHP-algorithm

A multistage serial production system is considered in the present paper. A generalized model has been developed with the use of probabilistic demand situations for the end product. The demand situations considered are binomial, exponential, lognormal and Poisson. These demand patterns are used as input parameter for various production control policies. The output values for performance parameters are obtained by simulation. The production policies analyzed are Kanban, CONWIP and Hybrid as alternatives for controlling the engineering manufacture. In the presence of several performance measures, it often becomes difficult for the management to select the most appropriate policy. Analytic hierarchy process (AHP) has been implemented for the purpose of selection. Computational results have been reported along with the sensitivity analysis after designing and conducting various experiments.     

The Practical Application of Ozone Gas as an Anti-fungal (Anti-mold) Agent

We evaluated the ability of a portable ozone generating machine (Viroforce 1000) to inactivate 13 different species of environmental fungi. Samples, prepared as wet or dried films, were subjected to one or two cycles of treatment (35 ppm ozone for 20 minutes, with a short burst of?>90%?relative humidity), and measured for residual viability. Treatments could inactivate 3 log₁₀ cfu (colony forming units) of most of the fungi, both in the laboratory and in simulated field conditions, on various surfaces. We conclude that the ozone generator would be a valuable decontamination tool for mold removal in buildings.     

Kinetics of adsorption of sulfur mustard on Al2O3 nanoparticles with and without impregnants

BACKGROUND: Chemical warfare (CW) agents are highly toxic compounds and have been used in war to produce physical immobilization, so safe and effective ways to detoxify them without endangering human life or the environment is of great concern. One of the important ways to achieve protection against CW agents contaminating air is to utilize suitable adsorbent materials, e.g. activated carbon, nanoparticles, etc. In the present study nanoparticles, synthesized through sol–gel processes and loaded with reactive compounds have been used for the degradation of CW agents and to understand their adsorption kinetics using Fickian and linear driving force models. RESULTS: Nanoparticles of AP‐Al₂O₃ (aerogel‐produced alumina) in the size range 2–30 nm with high surface area (375 m² g^?1) were produced by an alkoxide‐based synthesis, and then characterized using N₂‐Brunauer–Emmet–Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA) techniques. Thereafter, these were impregnated, and finally tested for kinetics of adsorption of sulfur mustard (HD) under static conditions. The kinetics was studied using linear driving force and Fickian diffusion models and the kinetics parameters determined. CONCLUSION: AP‐Al₂O₃ with 10% impregnation of 9‐molybdo‐3‐vanadophosphoric acid (10%, w/w) showed the maximum uptake (640 mg g^?1) of HD. The highest adsorption potential indicated that the adsorption was due not only to physisorption but also involved chemisorption. Values of the diffusional exponent indicated the mechanism to be Fickian and anomalous. Hydrolysis, dehydrochlorination and oxidation reactions (identified using gas chromatography‐mass spectrometry (GC/MS)) were found to be the route of degradation of HD over the prepared nanoparticle based adsorbents. Copyright © 2009 Society of Chemical Industry     

Spectral and kinetic characterization of orange-red emitting Sr3Al2O6:Eu/Smphosphor

We report, for the first time Sm³⁺ doped nanocrystalline Sr₃Al₂O₆ phosphor. Effect of Eu³⁺ doping in the present host is also studied. XRD results match with standard data from JCPDS file confirming cubic structure with Pa3 space group. PL Maximum for Eu/Sm is obtained at 590 nm and 573 nm respectively, and corresponds to orange-red region of electromagnetic spectrum. Morphology of combustion synthesized powder is platelet, while for calcined powders, cubic shaped crystallites are obtained. Information on various trapping parameters is obtained from thermally stimulated Luminescence (TSL) studies. Non-shifting T_m property is applied to define the order of kinetics and is thereafter assumed as 1. T_m − T_stop procedure and repeated initial rise method are applied to estimate apparent activation energies and peak positions. Further, chi-square minimization procedures via computerized glow curve deconvolution (CGCD) technique provide best-fit results. The figure of merit for deconvoluted Eu and Sm doped samples are 0.48% and 0.67% respectively. The apparent activation energies for Eu doped samples are 0.89 eV, 1.05 eV, 1.30 eV, while, for Sm doped samples, the activation energies are 0.84 eV and 1.06 eV. Persistence behavior of the present phosphor is attributed to contribution due to shorter and longer components as are obtained during phosphorescence decay studies. In both the cases; probability of recombination is more in comparison to the retrapping within a quasi continuous framework of trapping sites.     

Design and performance analysis of a nanoscaled inverter based on wrap-aroundgate nanowire MOSFETs

The design and analysis of a silicon nanowire inverter with a wrap-around-gate nMOS is presented and its performance is compared with that of a conventional inverter. The analysis shows that the nano-channel structure design can improve carrier mobility by suppressing the transverse component of the electric field. This results in an enhancement in the current drive of the nMOS, and contributes to lowering power consumption and the switching delay. Simulated power consumption and rise time of the proposed design was found to be about 20 μW and 0.5 ns, respectively, compared with 2.5 mW and 1.5 ns achievable with conventional planar MOSFETs. Investigation of the gate length shows that a nMOS with shorter gates have an improved switching response compared with long channel devices.     

A Formula for the Conversion of 5-Minute Average, 10 Minute Average Rain Rate into 1-Minute Average Rain Rate for Prediction of Rain Induced Attenuation

The attenuation of microwave signal due to rain is a well established fact now. Localized models based on the rain rate and attenuation statistics is the basic necessity for a RF communication system designer. For development of any such model, we need long term statistics. These days most of the metrological data that is available is in the form of either 5-min or 10-min average rain rate and if we want to utilize this data, we need to convert this into 1-min equivalent average rain fall. In this paper, a formula has been purposed for the conversion of 5 min and 10 min average rain rate into 1 min equivalent average rain rate.     

Poly(acrylamide) functionalized chitosan: An efficient adsorbent for azo dyes from aqueous solutions

In the present communication we report on the optimization of persulfate/ascorbic acid initiated synthesis of chitosan-graft-poly(acrylamide) (Ch-g-PAM) and its application in the removal of azo dyes. The optimum yield of the copolymer was obtained using 16 × 10⁻² M acrylamide, 3.0 × 10⁻² M ascorbic acid, 2.4 × 10⁻³ M K₂S₂O₈ and 0.1 g chitosan in 25 mL of 5% aqueous formic acid at 45 ± 0.2 °C. Ch-g-PAM remained water insoluble even under highly acidic conditions and could efficiently remove Remazol violet and Procion yellow dyes from the aqueous solutions over a pH range of 3–8 in contrast to chitosan (Ch) which showed pH dependent adsorption. The adsorption data of the Ch-g-PAM and Ch for both the dyes were modeled by Langmuir and Freundlich isotherms where the data fitted better to Langmuir isotherms. To understand the adsorption behavior of Ch-g-PAM, adsorption of Remazol violet on to the copolymer was optimized and the kinetic and thermodynamic studies were carried out taking Ch as reference. Both Ch-g-PAM and Ch followed pseudo-second-order adsorption kinetics. The thermodynamic study revealed a positive heat of adsorption (ΔH°), a positive ΔS° and a negative ΔG°, indicating spontaneous and endothermic nature of the adsorption of RV dye on to the Ch-g-PAM. The Ch-g-PAM was found to be very efficient in removing color from real industrial wastewater as well, though the interfering ions present in the wastewater slightly hindered its adsorption capacity. The data from regeneration efficiencies for ten cycles evidenced the high reusability of the copolymer in the treatment of waste water laden with even high concentrations of dye.     

Failure analysis of left barrel of an aircraft engine

This investigation analyses the failure of left barrel used in engine of an aircraft. The barrel was subjected to detailed examination using standard non-destructive and destructive testing methods in order to identify the cause of failure of left barrel. The experimental results include fractography, chemical analysis, coating analysis and optical microstructure. The investigation concludes that failure is caused by the formation of corrosion pits which act as stress raiser and fatigue has assisted in propagation of the crack.