Selective separation of yttrium from rare earth elements by ion interaction chromatography. Analytical and larger scale applications

ABSTRACT

New ion interaction chromatographic (IIC) method employing Kromasil 100 C₁₈ column and tetra-n-butylammonium hydroxide (TBAOH) as an ion interaction reagent (IIR) is able to separate yttrium from Rare Earth Elements (REE) as anionic complexes with nitrilotriacetic acid (NTA). New method for the chromatographic determination of Y in REE mixture was devised and validated by the analysis of the certified reference material (CRM). Potential possibilities of the new chromatographic system for larger scale applications including macro-micro events were demonstrated.     

In vivo and in vitro lipid accumulation inBorago officinalis L.

Seeds of 13 accessions of borage (Borago officinalis) varied in total fatty acid content from 28.6 to 35.1% seed weight, with linoleic, γ-linolenic, oleic and palmitic as the predominant fatty acids, averaging 38.1%, 22.8%, 16.3% and 11.3% of total fatty acids, respectively. There was an inverse relation between γ-linolenic acid (25.0 to 17.6%) and oleic acid (14.5 to 21.3%). Fatty acid content of leaf tissues was 9.1% dry weight, with α-linolenic acid 55.2% and γ-linolenic acid 4.4% of total fatty acids. Cotyledons were the major source of fatty acids in seeds. Seed fatty acid content increased from <1 mg at six days postanthesis to about seven mg at maturity (22 to 24 days). Individual fatty acid content of seed was relatively constant after day 8. When immature embryos from 6 to 16 days postanthesis were cultured in a liquid or semisolid basal medium, fatty acid composition was similar to that of in vivo-grown seeds. Growth of cultured embryos decreased as sucrose concentration was increased from 3 to 20% in the basal medium, and most embryos did not survive 30% sucrose; fatty acid as a percentage of dry weight was maximal at 6% sucrose.     

Polyesters containing sulfur. I. Products of melt polycondensation of diphenylmethane-4,4′-di(methylthioacetic acid) with some diols

Several new polyesters containing sulfur in the main chain were obtained by melt polycondensation of diphenylmethane-4,4′-di(methylthioacetic acid) with ethanediol, 1,3-propane diol, 1,4-butanediol, 1,5-pentenediol, 1,6-hexanediol, 1,2-propanediol, and 2,2′-oxydiethanol. The structure of all polyesters was determined from elemental analysis and infrared (IR) spectra. Yield, reduced viscosity, molecular weight, and softening temperature for reaction products have been found. Initial decomposition and initial intensive decomposition temperature were defined from the curves of thermogravimetric analysis.     

Cold sintering of diatomaceous earth

Diatomite, a natural silicate-based sedimentary rock, was densified by cold sintering at room temperature and 150°C under various pressures (100, 200, and 300 MPa) and using different NaOH water solutions (0–3 M). The relative density of cold sintered diatomite can be as high as 90%, a condition that can be achieved by conventional firing only at 1200–1300°C. The cold sintered materials maintain the same mineralogical composition of the starting powder (quartz, glass, and illite) and are constituted by well-deformed and flattened grains oriented orthogonally to the applied pressure. Conversely, an evident phase evolution takes place upon conventional firing with the formation of cristobalite and mullite. The bending strength of cold sintered artifacts can exceed 40 MPa and increases to ≈80 MPa after post-annealing at 800°C, such mechanical strength is much larger than that of conventionally pressed samples sintered at 800°C, which is only ≈1 MPa.     

Terahertz time domain spectroscopy of graphene and MXene polymer composites

The rising demand for faster and more efficient electronic devices forces electronics industry to shift toward terahertz frequencies. Therefore there is a growing need for efficient, lightweight, and easy to produce absorbing materials in the terahertz range for electromagnetic interference (EMI) shielding and related applications. This study presents a study on basic optical properties of two types polymer-based composites loaded with two-dimensional structures—graphene and MXene phases (Ti₂C). In said range, total EMI shielding efficiency (SE) and its components, the absorption coefficient (α ), refractive index, and complex dielectric function are investigated. The ratio of SE absorption component to reflection component (SE_ABS :SE_R ) of fabricated composites is equal or higher than 30:1 in over 80% of studied range. The fabricated composites exhibit low (<0.1) loss tangent in studied range. The addition of 1 wt% of graphene increases the composite α over 10-fold in respect to pure polymer–up to 60 cm⁻¹ for frequency higher than 2 THz.     

CR composites with improved processing safety crosslinked via Heck's reaction

The aim of this study was to optimize the composition of the chloroprene rubber (CR) composites crosslinked via the Heck-type reaction to ensure their safe processing at elevated temperature. The developed curing system consisting of iron (III) acetylacetonate (Fe(acac)) and triethanolamine (TEOA) demonstrates high activity and more eco-friendly composition in comparison with metal oxide system, commercially used for CR crosslinking. However, the high activity of Fe(acac)/TEOA system results in a short scorch time, which is the greatest disadvantage regarding the safe processing of CR rubber and thus, must be improved. Therefore, CR compounds with Fe(acac) in the presence of different additives were studied. The longest scorch times (t₀₂) were observed for rubber compounds with urotropine (U), N-cyclohexyl-2-benzothiazole sulfenamide (CBS) or salicylic acid. Moreover, vulcanizates containing these additives exhibited higher tensile strengths and elongation at breaks compared to CR crosslinked with Fe(acac)/TEOA system.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.     

Empathy and Modern Technology: A Neuroergonomics Perspective

The primary purpose of this paper is to discuss the role of empathy in the design of advanced systems in manufacturing and service industries in order to ensure suitable working conditions for employees from the social and technological point of view. The origins and components of empathy are briefly reviewed. The neural underpinnings of three components of empathy, including cognitive, emotional, and behavioral aspects, are considered in the context of human–human and human–machine interactions, as well as design of working environments. Finally, the potential advantages of applying empathy‐related knowledge to the design and development of human‐centered technology are discussed.     

Knowledge base support for dynamic information system management

Enterprise activities are governed by regulations and laws that are multiple, heterogeneous and not always easy to understand. The arising and/or the modification of these regulations and laws can cause a significant impact in the business context, especially in terms of enterprise information systems adaptation. Currently, there are many methodological and technological tools that facilitate the application of regulations and procedures, but they are not integrated enough to ensure a complete problem management. Therefore, they are not sufficient to support organizations and companies in the management of their business processes. In this paper we propose a methodological and technological solution, able to model, manage, execute and monitor business processes of complex domains. The system allows both the design of an information system and its prototyping as a web application, by the extension of an appropriately selected Business Process Management suite. During both the design and the usage phases of the prototyped information system, it is possible to interface with a knowledge base that contains information about regulations and aspects that characterize the enterprise (organizational chart, tasks, etc.).