Removal of trace amounts of strontium from aqueous solutions by ion flotation. II Continuous scale operation

A flotation circuit operating on a continuous basis has been designed and constructed for removal of Sr ions from simple aqueous solutions. Under steady-state conditions, a continuous extraction rate of 97.3% has so far been achieved. The effects of changing the gas rate and flow rates of both the Sr and collector solutions were also examined. Finally a discussion is included where the results of these experiments are compared with those from similar continuous-scale experiments where Sr ions are removed by the technique of foam separation.     

The removal of radioactive caesium contaminants from simple aqueous solutions

Cs ions can be removed from aqueous solutions by forming a precipitate of copper ferrocyanide which, having occluded the Cs ions, can in turn be floated by means of an anionic collector. Collection was achieved with either α-sulphopalmitic acid or sodium dodecyl sulphate depending on what interfering ions were initially present in the solution. Recoveries of 98–99% were obtained on batch scale experiments and 97.5–98.5% on continuous scale operation. The investigations of the flotation parameters of pH, gas-rate, concentrations of precipitating reagents and collector, as well as the interference effects of other ions are discussed. Using data obtained in batch scale tests, continuous scale experiments were designed and operated.     

Damage Mechanisms and the Mechanical Properties of a Laminated 0/90 Ceramic/Matrix Composite

The tensile properties of a 0/90 laminated CAS matrix composite reinforced with Nicalon fibers have been measured. Some effects of notches have also been explored. Changes in modulus and permanent strain caused by matrix cracking have been measured and compared with available models. For this comparison, independent measurements have been made of the constituent properties and the residual stress. The ultimate tensile strength has also been measured and compared with a global load-sharing model. It is concluded that lower-bound matrix cracking models provide good predictability of the stresses at which various matrix cracking mechanisms first operate. Also, the ultimate tensile strength is found to be consistent with a global load-sharing model, based on the in situ strength properties of the fibers. Conversely, the evolution of matrix cracks at stresses above the lower bound has yet to be adequately modeled. In addition, a need is identified for improved models relating elastic properties and permanent strains to matrix crack spacing.     

Spin coating behavior of polyimide precursor solutions

Experimental data confirm the utility of the following simple equation in predicting the spin coating behavior of polyimide precursor solutions: in which .     

Aqueous gel permeation chromatography: The effect of solvent ionic strength

Porous glass packing materials have been used for gel permeation chromatography using an aqueous phosphate buffer. Elution volumes were determined for polystyrene sulfonates, dextrans, and small neutral and charged molecules at three different ionic strengths, viz., 0.01M, 0.1M, and 1.0M phosphate, pH 7.0. The pore diameters of the glasses studied were 75, 240, 700, and 2000 Å. Elution volumes of nonionic species were unaffected by changing the solvent ionic strength. Elution volumes of charged species were markedly affected by the ionic strength of the solvent. This was attributed to a combination of decreased polymer dimensions and decreased ionic exclusion with increasing buffer concentration. The use of low ionic strength solvents may be exploited to tailor the separating range for polyelectrolytes with porous glass packings. This is particularly useful in the low molecular weight range where the lowest pore size available is 75 Å.     

Use of a dark object concept and support vector machines to automate forest cover change analysis

An automated method was developed for mapping forest cover change using satellite remote sensing data sets. This multi-temporal classification method consists of a training data automation (TDA) procedure and uses the advanced support vector machines (SVM) algorithm. The TDA procedure automatically generates training data using input satellite images and existing land cover products. The derived high quality training data allow the SVM to produce reliable forest cover change products. This approach was tested in 19 study areas selected from major forest biomes across the globe. In each area a forest cover change map was produced using a pair of Landsat images acquired around 1990 and 2000. High resolution IKONOS images and independently developed reference data sets were available for evaluating the derived change products in 7 of those areas. The overall accuracy values were over 90% for 5 areas, and were 89.4% and 89.6% for the remaining two areas. The user's and producer's accuracies of the forest loss class were over 80% for all 7 study areas, demonstrating that this method is especially effective for mapping major disturbances with low commission errors. IKONOS images were also available in the remaining 12 study areas but they were either located in non-forest areas or in forest areas that did not experience forest cover change between 1990 and 2000. For those areas the IKONOS images were used to assist visual interpretation of the Landsat images in assessing the derived change products. This visual assessment revealed that for most of those areas the derived change products likely were as reliable as those in the 7 areas where accuracy assessment was conducted. The results also suggest that images acquired during leaf-off seasons should not be used in forest cover change analysis in areas where deciduous forests exist. Being highly automatic and with demonstrated capability to produce reliable change products, the TDA-SVM method should be especially useful for quantifying forest cover change over large areas.     

A wireless embedded tongue tactile biofeedback system for balance control

We describe the architecture of an original biofeedback system for balance improvement for fall prevention and present results of a feasibility study. The underlying principle of this biofeedback consists of providing supplementary information related to foot sole pressure distribution through a wireless embedded tongue-placed tactile output device.Twelve young healthy adults voluntarily participated in this experiment. They were asked to stand as immobile as possible with their eyes closed in two conditions of no-biofeedback and biofeedback. Centre of foot pressure (CoP) displacements were recorded using a force platform. Results showed reduced CoP displacements in the biofeedback relative to the no-biofeedback condition.On the whole, the present findings evidence the effectiveness of this system in improving postural control on young healthy adults. Further investigations are needed to strengthen the potential clinical value of this device.     

Economic modeling of board test strategies

A long and deep recession, coupled with continuous competitive pressure to reduce costs, is forcing many companies to review their test strategies. Testing costs have become a more significant proportion of the overall manufacturing cost even though manufacturing yields have increased dramatically over the past ten or twelve years. This causes attention to be focused on testing costs as a key source of cost reduction. The increased use of DFT and the integration of design and test are very positive moves towards controlling testing costs but other methods employed can often backfire. The increased use of low priced testers is one such method. The pressure to reduce costs, higher process yields and exhortations that testing adds no value can lead the test engineering manager to take the cheap route. In reality this can often turn out to be an expensive decision. The only way to avoid expensive mistakes is to perform an economic analysis of the alternative courses of action. In most cases this is done, but not always in the right manner or with the necessary amount of detail to make the comparisons meaningful. This article discusses the need for effective cost analysis of test strategies and highlights some of the pitfalls.