Significantly high electromagnetic shielding effectiveness in polypyrrole synthesized by eco-friendly and cost-effective technique

A facile and eco-friendly synthesis of polypyrrole from monomer pyrrole using nominal amount of ferric chloride hexahydrate (FeCl₃.6H₂O) oxidant in aqueous solution by chemically oxidative polymerization method has been reported. The use of aqueous solvent and ferric chloride hexahydrate salt in polypyrrole synthesis have an eco-friendly route favorable for the production of polypyrrole in large quantities. The synthesized polypyrrole samples exhibit good electrical conductivity (2 S/cm) and yield of 80% for reaction time of 8 hr at 5°C. Quality and properties of polypyrrole samples have been thoroughly investigated with varying reaction time and temperature while other synthesis parameters like molar ratio of oxidant to monomer, oxidant concentration, and solvent were kept constant. X-ray diffraction analysis of polypyrrole with a shorter reaction time shows the presence of iron oxide (Fe₂O₃) peaks. The complete reaction may not occur at shorter reaction times due to which residual ferric ions converted into Fe₂O₃. X-ray photoelectron spectroscopy measurement of polypyrrole also confirms the formation of Fe₂O₃. Appropriate selection of reaction time and temperature produced pure phase polypyrrole with high yield and good conductivity. Synthesized polypyrrole by our eco-friendly and cost-effective technique exhibits prominent electromagnetic shielding effectiveness value of 30 dB in the X-band (8–12 GHz).     

Biomimetic monolayer-protected gold nanoparticles for immunorecognition

Gold nanoparticles (AuNPs) protected by self-assembled monolayers (SAMs) are capable of presenting precisely engineered surfaces at the nanoscale, allowing the mimicry of biomacromolecules on an artificial platform. Here we review the generation, characterization, and applications of monolayer-protected AuNPs that have been designed for immunorecognition by the integration of an oligopeptide epitope into the protecting monolayer. The resulting peptide-AuNP conjugate is an effective platform for biomimesis, as demonstrated by multiple studies. Recent work is presented and future directions for this field of research are discussed.     

Investigation of solid particle erosion-related failures in once-through steam generators (OTSGs) in oil sands in-situ production: The limitations of the API RP 14E guideline in OTSG design or operational decision-making

The required steam for steam-assisted gravity drainage (SAGD) oil sands operations is generated using a once-through steam generator (OTSG) that is fed with relatively poor quality process water. Industries have reported possible solid particle erosion-related failure in the OTSG boiler tubes because of the transport of precipitated dense inorganic particles. However, the presence of other damage mechanisms, e.g. corrosion, flow accelerated corrosion (FAC), often masks the evidence of erosive wear. Also, industries set an upper limit operating velocity for the OTSG using the API RP 14E guideline, which provides no quantitative erosion rates to determine an operating envelope. This study presents a computational fluid dynamics (CFD) analysis of erosion damage in a SAGD OTSG boiler tube. The results revealed that API RP 14E may not be an effective decision-making tool for operating the OTSG system. For example, a 10% increase in velocity, even at conditions below the API RP 14E threshold, showed a decrease in the failure time of the boiler tubes by 40%–50%.     

The inhibition of corrosion and hydrogen embrittlement of AISI 410 stainless steel

A study was carried out on the inhibition of corrosion and hydrogen embrittlement of AISI 410 stainless steel by two organic inhibitors, namely benzotriazole and benzonitrile. Tensile testing, scanning electron microscopy, weight loss measurements and potentiodynamic polarization were the techniques used for this study. Tensile tests showed that 410 steel is highly susceptible to hydrogen stress cracking. Scanning electron microscopic observations of fracture surfaces showed a brittle quasi-cleavage type of failure when the steel was hydrogen charged from 0.5m H₂SO₄. Both inhibitors reduced hydrogen induced ductility loss though the fracture mode was unaltered. They showed increasing inhibition efficiencies for corrosion as well as cathodic hydrogen evolution as their concentration in H₂SO₄ increased from 3.9×10^–5 m to 8.4×10^–3 m. Benzonitrile was found to be a more efficient inhibitor than benzotriazole for AISI 410 stainless steel exposed to 0.5m H₂SO₄.     

Constrained nonlinear optimization for solubility parameters of poly(lactic acid) and poly(glycolic acid)—validation and comparison

An optimization technique has been proposed to determine Hansen solubility parameters (HSP) and radius of interaction (R) of PLA and PGA; objective function to be minimized being radius of interaction (R), and the constraints being that the solvents should be within and nonsolvents outside the interaction sphere. The proposed method has been validated and found to be most reliable. The values of HSP (δ_d, δ_p, δ_h) and R for PLA have been obtained as ((18.50, 9.70, 6.00) and 10.50) (J/cc)^0.5 at 25 °C; and those of PGA as ((17.70, 6.21, 12.50) and 1.92) (J/cc)^0.5 at 80 °C. For formulating the nonlinear inequality constraints known HSP data for 20 solvents and seven nonsolvents have been used for PLA at 25 °C; similarly HSP data for three newly found solvents (phenol, m-cresol and 4-chlorophenol), and five nonsolvents have been used for PGA at 80 °C. Established methods have been used for comparison. HSP and R have been directly compared using the 3D intrinsic viscosity and classical methods. Indirectly the total solubility parameter δ has been compared with the values obtained from the intrinsic viscosity 1D approach and group contribution method using Fedors and van Krevelen correlations. The 1D approach has led to an empirical correlation for intrinsic viscosities of PLA and PGA.     

Thermodynamic mechanism of free heme action on sickle cell hemoglobin polymerization

For insights into the mechanisms of heme action on the rate of sickle cell hemoglobin polymerization, we determine the erythrocytic concentration of free heme using a novel method based on enzymatic catalysis and luminescence. We find in sickle cell patients 44 ± 10 µM, in sickle trait individuals, 33 ± 4 µM, and in healthy adults, 21 ± 2 µM. We test the applicability of two mechanisms of heme action: a kinetic one, whereby heme aggregates serve as heterogeneous nucleation centers, and a thermodynamic pathway, in which free heme enhances the attraction between sickle hemoglobin (HbS) molecules in solution. We show that the latter mechanism exclusively operates. The enhanced attraction leads to increase of the total volume of a population of dense liquid clusters by about two orders of magnitude. As the dense liquid clusters serve as locations and precursors to the formation of the HbS polymer nuclei, their increased volume directly leads to faster polymer nucleation. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2861–2870, 2015     

Effects of Microwave Processing on Fiber-Matrix Adhesion. II. Enhanced Chemical Bonding of Epoxy to Carbon Fibers

The effect of microwave processing on the chemical interactions occurring between the carbon fiber surface and the epoxy matrix constituents was investigated using X-ray Photoelectron Spectroscopy (XPS). Monofunctional model compounds selected to duplicate the matrix constituents were exposed to the carbon fibers at temperatures similar to those encountered during composite processing. After solvent extraction, chemisorbed species were quantified by XPS. Differences were apparent in the C 1s and O 1s core electron regions of the microwave treated samples when referenced to the same elemental regions of thermally (convection) treated samples. Specifically, the atomic percentage of oxygen (in the form of carbon oxides) was increased to a greater degree when using the microwave treatment as opposed to the thermal treatments. The microwave treatment resulted in a substantial increase in the amount of chemical interaction between the fiber surface and the epoxy resin and amine components of the matrix. An epoxy resin/amine hardener adduct compound was also used to investigate the possible interaction of the adduct hydroxyl group with the carbon fiber surface. XPS results indicate a low to insignificant interaction of the hydroxyl with the carbon fiber surface under the conditions used in this study.     

Modification of Poly(Vinyl Chloride) for Biocompatibility Improvement and Biomedical Application-Review

Poly(vinyl chloride) is widely used in biomedical devices. This review deals with various applications of PVC and modified PVC in the medical field. Blended, grafted, and plasma-treated modified PVCs are described for various medical applications. Plasma treatment of PVC devices is a versatile and useful method for changing the surface properties, as compared to blending and grafting.     

A Genetically-Based Latitudinal Cline in the Emission of Herbivore-Induced Plant Volatile Organic Compounds

The existence of predictable latitudinal variation in plant defense against herbivores remains controversial. A prevailing view holds that higher levels of plant defense evolve at low latitudes compared to high latitudes as an adaptive plant response to higher herbivore pressure on low-latitude plants. To date, this prediction has not been examined with respect to volatile organic compounds (VOCs) that many plants emit, often thus attracting the natural enemies of herbivores. Here, we compared genetically-based constitutive and herbivore-induced aboveground vegetative VOC emissions from plants originating across a gradient of more than 10° of latitude (>1,500 km). We collected headspace VOCs from Asclepias syriaca (common milkweed) originating from 20 populations across its natural range and grown in a common garden near the range center. Feeding by specialist Danaus plexippus (monarch) larvae induced VOCs, and field environmental conditions (temperature, light, and humidity) also influenced emissions. Monarch damage increased plant VOC concentrations and altered VOC blends. We found that genetically-based induced VOC emissions varied with the latitude of plant population origin, although the pattern followed the reverse of that predicted—induced VOC concentration increased with increasing latitude. This pattern appeared to be driven by a greater induction of sesquiterpenoids at higher latitudes. In contrast, constitutive VOC emission did not vary systematically with latitude, and the induction of green leafy volatiles declined with latitude. Our results do not support the prevailing view that plant defense is greater at lower than at higher latitudes. That the pattern holds only for herbivore-induced VOC emission, and not constitutive emission, suggests that latitudinal variation in VOCs is not a simple adaptive response to climatic factors.     

Kinetics of esterification of cycloaliphatic epoxies with methacrylic acid

The esterification of cycloaliphatic epoxy resins CER I and CER II containing glycidyl and cyclohexane epoxy groups, respectively, as their reactive units was carried out using a 1 : 0.9 stoichiometric ratio of resin and methacrylic acid in the presence of triphenylphosphine. The reaction was performed at 80, 85, 90, 95, and 100°C and it followed second‐order kinetics. The specific rate constants, calculated by regression analysis, were found to obey an Arrhenius expression. Kinetic and thermodynamic parameters, activation energy, frequency factor, entropy, enthalpy, and free energy of the reaction, revealed that the reaction was spontaneous and irreversible and produced a highly ordered activated complex. The reactivity of CER II was found to be higher than that of CER I. The difference in the reactivity of the cycloaliphatic epoxies was explained by proposing a reaction mechanism. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3197–3204, 2002