Ergonomics solution for crossing collisions based on field assessment of visual environment at urban intersections in Japan

This paper aims to assess quantitatively the actual visual environment of uncontrolled urban downtown intersections in Japan in relation to frequently occurring crossing collisions and to discuss the safety countermeasures for them. In Field Study 1 dealing with direct visibility, our ultra-wide-angle photograph analysis revealed that most of the right/left-ward visible range at 11 intersections were insufficient to check safety, and the quality of direct visibility was closely associated with causing crossing collisions. The countermeasures to reduce a blind area were determined to be a top priority. In Field Study 2 dealing with indirect visibility, more than half of the 25 traffic convex mirrors had marked shortcomings for preventive safety, and ergonomics guidelines ensuring indirect visibility were proposed for installing traffic convex mirrors. Low-cost/low-technology-oriented countermeasures are highly recommended to obtain clear/sufficient images of crucial information satisfying drivers' requirements on traffic convex mirrors in accordance with those ergonomics guidelines was highly recommended. Crossing collisions could be prevented by improvement of poor direct and indirect visibility.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO₄₊ , in which the phase separation observed in La₂CuO₄₊ is suppressed. A phase diagram in theT– plane is given for La_1.9Bi_0.1CuO₄₊ with excess oxygen. For very small values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly at 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Parsing human skeletons in an operating room

Multiple human pose estimation is an important yet challenging problem. In an operating room (OR) environment, the 3D body poses of surgeons and medical staff can provide important clues for surgical workflow analysis. For that purpose, we propose an algorithm for localizing and recovering body poses of multiple human in an OR environment under a multi-camera setup. Our model builds on 3D Pictorial Structures and 2D body part localization across all camera views, using convolutional neural networks (ConvNets). To evaluate our algorithm, we introduce a dataset captured in a real OR environment. Our dataset is unique, challenging and publicly available with annotated ground truths. Our proposed algorithm yields to promising pose estimation results on this dataset.     

Simulation of postoperative 3D facial morphology using a physics-based head model

We propose a prototype of a facial surgery simulation system for surgical planning and the prediction of facial deformation. We use a physics-based human head model. Our head model has a 3D hierarchical structure that consists of soft tissue and the skull, constructed from the exact 3D CT patient data. Anatomic points measured on X-ray images from both frontal and side views are used to fire the model to the patient's head. The purposes of this research is to analyze the relationship between changes of mandibular position and facial morphology after orthognathic surgery, and to simulate the exact postoperative 3D facial shape. In the experiment, we used our model to predict the facial shape after surgery for patients with mandibular prognathism. Comparing the simulation results and the actual facial images after the surgery shows that the proposed method is practical.     

Helium gas permeability of montmorillonite/epoxy nanocomposites

Helium gas permeability of silicate clay (montmorillonite) particles/epoxy nanocomposites was examined. The incorporation of increasing amounts of montmorillonite particles reduced the helium gas permeability. Based on Fick’s law, gas permeation behavior of the nanocomposite was evaluated. With the increase of montmorillonite loading, gas diffusivity decreased, while gas solubility increased. Helium diffusion behavior is in agreement to the numerical results based on the Hatta–Taya–Eshelby theory. It has been revealed that dispersion of nanoscale platelets in polymer is effective in improving gas barrier property.     

Effect of atomic oxygen exposure on bubble formation in aluminum alloy

In order to investigate the effect of atomic oxygen exposure of an aluminum alloy on bubble formation during welding, electron beam welding was performed on the samples exposed to atomic oxygen produced by the oxygen plasma method. The change in the aluminum surface due to the exposure was analyzed by auger electron spectroscopy. Due to the exposure of atomic oxygen, the thickness of the aluminum oxide film increases on the surface, and pores are formed during welding. The pores can be formed by the formation of the Al₂O gas through the reaction between the aluminum oxide and aluminum in a high vacuum.     

The fluorescence behavior from SAM of dendron with rhodamine B as a center

We studied energy transfer between rhodamine B molecules centered in each corn-shaped dendrons that forms self-assembled monolayer (SAM) film on an Au substrate. A SAM film using dendron moiety as a spacer can change the distance between rhodamines depending on the size, so that the energy transfer from an initially photo-excited rhodamine to its surrounding molecules can be controlled. The absorption spectrum of a SAM film for each generation of dendron was measured to ascertain a linear correlation between the generation and the distance. Picosecond time-resolved fluorescence spectra showed clear differences in the fluorescence decay dynamics between third-generation (G3) and fourth-generation (G4) dendron SAM films. In addition, we found that “dry” or “wet” dendron SAM considerably influenced fluorescence behavior. As a result, the use of “wet” G4 SAM is suitable in preserving photo-excitation energy. This is because it gave almost equal dynamics to G4 dendron in the dilute solution and prevented deactivation by energy dissipation.     

Applications of ceramics for tribological components

Fine ceramics are expected to be applied as new materials to many tribological components because of their superior heat resistance and corrosion resistance and their high hardness. In this paper, wear and frictional test results from applications of these components in machines are given and the capabilities of fine ceramics are described.     

Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.