Current distribution in a two-dimensional narrow gap cell composed of a gas evolving electrode with an open part

On the basis of the observation of gas bubbles evolved by electrolysis, a two-dimensional vertical model cell composed of electrodes with open parts for releasing gas bubbles to the back side is proposed. The model cell consists of two layers. One layer forms a bubble curtain with a maximum volume fraction of gas bubbles in the vicinity of the working electrode with open parts. The other. being located out of the bubble layer, is a convection layer with a small volume fraction distributed in the vertical direction under forced convection conditions. The cell resistance and the current distribution were computed by the finite element method when resistivity in the back side varied in the vertical direction along the cell. The following three cases for overpotential were considered: no overpotential, overpotential of the linear type and overpotential of the Butler-Volmer type. It was found that the cell resistance was determined not only by the interelectrode gap but also by the percentage of open area and in some cases by the superficial surface area. The cell resistance varied only slightly with the distribution of the bubble layer in the back side.Nomenclature b linear overpotential coefficient given byb=/i - C proportionality constant given by Equation 15 - d ₁ distance between front side of working electrode and separator - d ₂ thickness of separator - F Faraday constant - I total current per half pitch - i current density at working electrode - i ₀ exchange current density - L length of a real electrolysis cell - n number of electrons transferred in electrode reaction - O _p percentage of open area given by Equation 1 - p pitch, i.e. twice the length of the unit cell, defined by 2(BC) in Fig. 4 - q thickness of bubble curtain, defined by (AM) in Fig. 4 - R gas constant - r _t total cell resistance - r unit-cell resistance defined by (V – V _eq)/I - r _rs residue ofr from sum ofr ₀ andr - r ₀ ohmic resistance of solution when0 _p=0 - r resistance due to overpotential when0 _p=0 - s electrode surface ratio or superficial surface area given by Equation 2 for the present model - T absolute temperature - t thickness of working electrode defined by EF in Fig. 4 - V cell voltage - V _eq open circuit potential difference between working and counter electrodes - solution velocity in cell - ₀ solution velocity at bottom of cell - w width of working electrode, defined by 2(DE) in Fig. 4 - x abscissa located on cell model - y ordinate located on cell model - anodic transfer coefficient - linear overpotential kinetic parameter defined byb/[_bc(p/2)] - d infinitesimally small length on the boundary - volume fraction of gas bubbles in cell - dimensionless cell voltage defined bynF(V – V _eq)/RT - overpotential at working electrode - Butler-Volmer overpotential kinetic parameter defined by [nFi _0bc(p/2)]/RT - coordinate perpendicular to boundary of model cell - ₁ resistivity of bubble-free solution - ₂ resistivity of separator - _bc resistivity of bubble curtain - potential in cell     

Applications of ceramics for tribological components

Fine ceramics are expected to be applied as new materials to many tribological components because of their superior heat resistance and corrosion resistance and their high hardness. In this paper, wear and frictional test results from applications of these components in machines are given and the capabilities of fine ceramics are described.     

Synthesis of stable and soluble one-handed helical poly(substituted acetylene)s without chiral pendant groups via polymer reaction in membrane state

A soluble and stable one-handed helical conjugated polymer without the coexistence of any other chiral moieties was successfully synthesized by asymmetric-induced polymerization of a chiral monomer having two hydroxyl groups followed by desubstitution of the chiral groups in a solid membrane state. The reason for the success was the polymer reaction was carried out in the membrane state. This is an alternative method to obtain such a unique chiral polymer which was obtained only by the helix-sense-selective polymerization (HSSP) we reported before. In addition the efficiency of the chiral induction was higher than that of the HSSP. It is interesting that the “Membrane state” acted like as if a protecting group.     

Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.     

Supplementation of the diet of dairy cows with trehalose results in milk with low lipid peroxide and high antioxidant content

The objective of this study was to investigate the effect of dietary supplementation with the disaccharides trehalose and cellobiose on antioxidant activity in rumen fluid, blood, and milk of dairy cows. Nine Holstein dairy cows housed in a free-stall barn were divided into 3 groups, with each group receiving a different dietary treatment (a control diet, a 1% trehalose-supplemented diet, or a 1% cellobiose-supplemented diet) following a 3 × 3 Latin square design. Feed intake and milk production increased in cows receiving the trehalose-supplemented diet compared with those receiving the control and cellobiose-supplemented diets. The total protozoa numbers in the rumen fluid of cows fed trehalose- or cellobiose-supplemented diets were greater than those of the control group. The C18:0 and C18:1 fatty acid content was increased in the milk of cows fed the trehalose-supplemented diet compared with that of the control group, and the C18:3n-3 fatty acid content in the milk of cows fed the cellobiose-supplemented diet was less than that of the control group. Plasma biochemical parameters were unchanged among the different treatments. In rumen fluid, 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity and superoxide dismutase activity were increased 2 h after feeding in cows receiving the cellobiose-supplemented diet compared with the control group, and the concentration of thiobarbituric acid reactive substances in the rumen fluid of cows fed the cellobiose-supplemented diet was decreased. In contrast, the values of these parameters measured in the milk of cows fed the cellobiose-supplemented diet were no different from those of control cows. Dietary supplementation with trehalose did, however, bring about an improvement of the oxidative status of milk and blood in these animals compared with controls. These results provide the first evidence supporting the use of dietary disaccharides to decrease lipid peroxide levels and increase the antioxidant content of dairy cow milk. The findings suggest that disaccharides, particularly trehalose, might be useful as supplements for reducing oxidative stress and improving the quality of milk for human consumption, as well as possibly impairing the processes that give rise to lipid oxidation odor in dairy cow milk.     

Novel episomal vectors and a highly efficient transformation procedure for the fission yeast Schizosaccharomyces japonicus

Schizosaccharomyces japonicus is a fission yeast for which new genetic tools have recently been developed. Here, we report novel plasmid vectors with high transformation efficiency and an electroporation method for Sz. japonicus. We isolated 44 replicating segments from 12 166 transformants of Sz. japonicus genomic fragments and found a chromosomal fragment, RS1, as a new replicating sequence that conferred high transformation activity to Sz. japonicus cells. This sequence was cloned into a pUC19 vector with ura4⁺ of Sz. pombe (pSJU11) or the kan gene on the kanMX6 module (pSJK11) as selection markers. These plasmids transformed Sz. japonicus cells in the early‐log phase by electroporation at a frequency of 123 cfu/µg for pSJK11 and 301 cfu/µg for pSJU11, which were higher than previously reported autonomously replicating sequences. Although a portion of plasmids remained in host cells by integration into the chromosome via RS1 segment, the plasmids could be recovered from transformants. The plasmid copy number was estimated to be 1.88 copies per cell by Southern blot analysis using a Sz. pombe ura4⁺ probe. The plasmid containing ade6⁺ suppressed the auxotrophic growth of the ade6‐domE mutant, indicating that the plasmid would be useful for suppressor screening and complementation assays in Sz. japonicus. Furthermore, pSJU11 transformed Sz. pombe cells with the same frequency as the pREP2 plasmid. This study is a report to demonstrate practical use of episomal plasmid vectors for genetic research in Sz. japonicus. RS1 has been submitted to the DDBJ/EMBL/GenBank database (Accession No. AB547343). Copyright © 2010 John Wiley & Sons, Ltd.