Enzymatic alcoholysis reaction of soy phospholipids

Lipase-catalyzed alcoholysis of soy phospholipids was investigated to simultaneously make lysophospholipids and fatty acid esters of individual alcohols. Alcoholysis was carried out by stirring a mixture of soy phospholipids and individual alcohols in equimolar proportions with 10% (by weight of reactants) Mucor miehei lipase at 55°C for 24 h. The products were isolated by column chromatography after removal of the lipase. Lysophospholipids (in 69–78% molar yield) were obtained from soy phospholipids, and the yield of esters of various alcohols also conformed nearly with theoretical yields.     

Iron-Based Nanoparticles for Toxic Organic Degradation: Silica Platform and Green Synthesis

Iron and iron oxide nanoparticles (NPs) are finding wide applications for the remediation of various toxic chloro-organic compounds (such as trichloroethylene, TCE), via reductive and oxidative processes. In this study, Fe NPs (30-50 nm) are synthesized by reduction from ferric ions immobilized (by ion exchange) on a platform (two types of sulfonated silica particles), in order to prevent the NP agglomeration. Next, the Fe NPs are oxidized and their effectiveness for the oxidative dechlorination of TCE via the heterogeneous decomposition of hydrogen peroxide to OH? on the surface of the iron oxide NPs was demonstrated. For the reductive approach, the use of ascorbic acid as a "green" reducing agent in conjunction with a secondary metal (Pd) inhibits NP oxidation and agglomeration through surface adsorbed species. The Fe/Pd NPs have been successfully applied for the dechlorination of TCE (k(SA), surface-area normalized reaction rate, = 8.1 ×10(-4) L/m(2)h).     

Melt‐mixed polypropylene/acrylonitrile‐butadiene‐styrene blends with multiwall carbon nanotubes: Effect of compatibilizer and modifier on morphology and electrical conductivity

Cocontinuous blends of 45/55 polypropylene (PP)/acrylonitrile‐butadiene‐styrene (ABS) with multiwall carbon nanotubes (MWNT) were prepared by melt‐mixing in a conical twin‐screw microcompounder. PP‐grafted‐maleic anhydride (PP‐g‐MA) and styrene MA were used as compatibilizers for PP/ABS blends. Scanning electron microscopic observations showed phase segregation of PP‐g‐MA in the blends. State of dispersion of MWNT in the presence or absence of the compatibilizers was assessed through AC electrical conductivity measurements and crystallization studies of the blends. An improvement in AC electrical conductivity was observed in blends in presence of either styrene MA or dual compatibilizers. The lowest electrical percolation threshold was achieved at 0.1 wt % of MWNT using sodium salt of 6‐amino hexanoic acid‐modified MWNT. Significant increase in crystallization temperature of PP phase of blends with MWNT was observed in the presence of compatibilizers as compared to blends without compatibilizers. An attempt has been made to address the complex issues of phase segregation, compatibilization, and dispersion of MWNT in cocontinuous blends of PP/ABS. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanical,electrical and thermal performance of hybrid polyethylene-graphene nanoplatelets-polypyrrole composites: a comparative analysis of 3D printed and compression molded samples

ABSTRACT

The paper focuses on the investigation of the 3D printing of multi-functional composites using graphene nanoplatelets (GNP), polypyrrole (PPY) and linear low-density polyethylene (LLDPE). A holistic approach was performed and characterization methods to assess the properties of 3D printed composites and compared with those of compression molded composites and neat LLDPE to understand the factors affecting their performance. It has been noted that the 3D printed composites have superior mechanical and electrical properties than neat LLDPE, but slightly lower compared to those of compression molded composites having high packing density of fillers. The nominal increases were 13.2% (tensile strength), 31.9% (flexural strength), 29.4% (flexural modulus) and 24.7% (storage modulus).     

Impacts of conservation agriculture on soil aggregation and aggregate-associated N under an irrigated agroecosystem of the Indo-Gangetic Plains

We evaluated impacts of conservation agriculture (zero tillage, bed planting and residue retention) on changes in total soil N (TSN) and aggregate-associated N storage in a sandy loam soil of the Indo-Gangetic Plains. Cotton (Gossypium hirsutum) and wheat (Triticum aestivum) crops were grown during the first 3 years (2008–2011) and in the last year, maize (Zea mays) and wheat were cultivated. Results indicate that after 4 years the plots under zero tillage with bed planting (ZT-B) and zero tillage with flat planting (ZT-F) had 15 % higher TSN concentrations than conventional tillage and bed planting plots (CT-B) (0.63 g kg^?1 soil) in the 0–5 cm soil layer. CT-B plots had lower soil bulk density that ZT plots in that layer. Plots under ZT-B (0.57 Mg ha^?1) contained 20 % higher TSN stock in the 0–5 cm soil layer than CT-B plots (0.48 Mg ha^?1). However, tillage had no impact on TSN concentration or stock in the sub-surface (5–15 and 15–30 cm) soil layers. Thus, in the 0–30 cm soil layer, ZT-B plots contained 6 and 5 % higher (P > 0.05) TSN stock compared with CT-B (2.15 Mg N ha^?1) and CT-F (2.19 Mg N ha^?1) plots respectively after 4 years. Plots that received cotton/maize + wheat residue (C/M + W RES) contained 16 % higher TSN concentration than plots with residues removed (N RES; 0.62 g kg^?1 soil) in the surface (0–5 cm) layer. Plots with only cotton/maize residue (C/M RES) or only wheat residue (W RES) retention/incorporation had similar TSN concentrations and stocks in the subsurface layer. Plots under ZT-B also had more macroaggregates (0.25–8 mm) and greater mean weight diameter with lower silt + clay sized particles than CT-B plots in that layer. A greater proportion of large macroaggregates (2–8 mm) in the plots under C/M + W RES compared with N RES were observed. In the 5–15 cm soil layer ZT-B and C/M + W RES treated plots had more macroaggregates and greater mean weight diameter than CT-B and N RES treated plots, respectively. Because of the greater amount of large aggregates, plots under ZT-B and C/M + W RES had 49 and 35 % higher large macroaggregate-associated N stocks than CT-B (38 kg TSN ha^?1) and N RES (40 kg TSN ha^?1) plots, respectively, in the 0–5 cm soil layer, although aggregates had similar TSN concentrations in all plots. Both tillage and residue retention had greater effects on aggregate-associated N stocks in the 5–15 cm layers. In addition to N content within large macroaggregates, small macroaggregate-associated N contents were also positively affected by ZT-B and C/M + W RES. Tillage and residue retention interaction effects were not significant for all parameters. Thus, the adoption of ZT in permanent beds with crop residue addition is a better management option for improvement of soil N (and thus possibly a reduced dose of fertilizer N can be adopted in the long run), as the management practice has the potential to improve soil aggregation with greater accumulation of TSN within macroaggregates, and this trend would likely have additive effects with advancing years of the same management practices in this region.     

Excimer laser ablation processed ferroelectric and antiferroelectric thin films

Abstract

The dielectric and electrical properties of excimer laser ablated processed paraelectric (Ba_0.5, Sr_0.5)TiO₃, ferroelectric Bi-layered SrBi₂(Ta_0.5Nb_0.5)₂O₉, and antiferroelectric (PbZrO₃) thin films have been investigated. The effect of processing parameters on the microstructure of the films and the functional properties has been presented in detail. Some of the recent studies of stress induced effects, dielectric, hysteresis and ac and dc electrical properties have been highlighted in conjunction with microstructures of the films.     

Membrane-based hybrid processes for high water recovery and selective inorganic pollutant separation

The removal of heavy metals (e.g. Pb(II), Cd(II), Cu(II), etc.) and oxyanions (e.g. nitrate, As(III, V), Cr(VI), etc.) is of immense interest for treatment of groundwater and other dilute aqueous systems. However, the presence of non-toxic components, such as hardness (Ca, Mg) and sulfate, can interfere with the separation of toxic species. For example, pressure-driven membrane processes, such as reverse osmosis (RO), have been limited for water treatment due to problems that these extraneous components cause with water recovery and ionic strength (osmotic pressure) of the retentate. In addition, nitrate rejection by RO is considerably lower than NaCl rejection, resulting in permeate concentrations that may be too high for groundwater recharging. Other separation systems that rely solely on sorption of toxic species (e.g. ion exchange resins) may not have sufficient selectivity for efficient use in the presence of competing ions. Hence, implementation of pressure-driven membrane separations and high capacity sorbents in hybrid processes shows much promise for remedying these difficulties. For example, selective separation of nitrate may be achieved by combining nanofiltration (NF) for sulfate removal, followed by RO or ion exchange for nitrate removal (see example 1). When small concentrations of toxic metals are present, the large retentate volumes of RO processes may be reduced by selective removal of toxic species with a high capacity sorbent, thus permitting disposal of a lower volume, non-toxic stream (see example 2). The use of microfiltration membrane-based sorbents containing multiple polymeric functional groups is a novel technique to achieve high metal sorption capacity under convective flow conditions. These sorbents are formed by the attachment of various polyamino acids (MW: 2500-10,000), such as polyaspartic acid (cation sorption), polyarginine (oxyanion sorption), and polycysteine (chelation exchange), directly on the membrane pore surfaces. Since these sorbents have also been found to have high selectivity over non-toxic metals, such as calcium, they are ideal candidates for hybrid processing with RO/NF.     

Microstructure and mechanical properties of ZrO2-Gd2O3 tetragonal polycrystals

The phases, transformability, microstructure and mechanical properties of ZrO₂-Gd₂O₃ polycrystals containing 1.75–8 mol% Gd₂O₃ were studied. The samples were prepared by a coprecipitation route followed by sintering at 1400°C for 2 hours. The grain size was in the range of 0.1–0.2 m except for some large grains at high Gd₂O₃ contents. Only a tetragonal phase was observed between 2–4 mol% Gd₂O₃ and a cubic phase for compositions containing 9.6 mol% Gd₂O₃. A peak K _IC of 12 MPa m^1/2 and a strength of 800 MPa were obtained in the 2 mol% Gd₂O₃ alloy for which the t m transformation on the fracture surface was also found to be maximum. Transformation toughening is able to account for most of the toughness of the samples.     

Electrochemical machining: new possibilities for micromachining

A better understanding of high rate anodic dissolution processes is urgently required for electrochemical micromachining (EMM) to become a widely employed manufacturing process in the electronic and precision manufacturing industries particularly in the micromanufacturing domain. A successful attempt has been made to develop an EMM setup for carrying out in depth independent research for achieving satisfactory control of electrochemical machining process parameters to meet the micromachining requirements. The developed EMM setup mainly consists of various sub-components and systems, e.g., mechanical machining unit, microtooling system, electrical power and controlling system and controlled electrolyte flow system, etc. All these system components are integrated in such a way that the developed EMM system setup will be capable of performing basic and fundamental research in the area of EMM fulfilling the requirements of micromachining objectives.