Superparamagnetic magnetite nanoparticles for cancer cells treatment via magnetic hyperthermia: effect of natural capping agent,particle size and concentration

Journal of Materials Science: Materials in Electronics - Superparamagnetic iron oxide nanoparticles (SPMNPs) continue to emerge as one of the most potential candidates in biomedical applications....     

Crystallization of indium tin oxide nanoparticles: from cooperative behavior to individuality

The crystallization pathway of indium tin oxide nanoparticles during solvothermal synthesis in benzyl alcohol was investigated. The synthesis was stopped after different reaction times in the range of 1-24 h, and the structural and morphological characteristics of the products were analyzed by powder X-ray diffraction, electron microscopy, and UV/Vis spectroscopy. Interestingly, the crystallization mechanism does not proceed along a simple nucleation and growth pathway, but involves a two-step process. In the first 12 h an intermediate phase is formed, which consists of nanocrystallites 3-6 nm in size stabilized by an organic matrix. In this organic-inorganic network the nanoparticles are aligned into superstructures, but without any crystallographic orientation. After 12 h the intermediate phase is abruptly transformed into indium tin oxide nanoparticles with the bixbyite structure and with crystallite sizes of about 10-12 nm. This step is accompanied by the disappearance of the organic phase and the loss of the superstructure.     

Colloidal-quantum-dot photovoltaics using atomic-ligand passivation

Colloidal-quantum-dot (CQD) optoelectronics offer a compelling combination of solution processing and spectral tunability through quantum size effects. So far, CQD solar cells have relied on the use of organic ligands to passivate the surface of the semiconductor nanoparticles. Although inorganic metal chalcogenide ligands have led to record electronic transport parameters in CQD films, no photovoltaic device has been reported based on such compounds. Here we establish an atomic ligand strategy that makes use of monovalent halide anions to enhance electronic transport and successfully passivate surface defects in PbS CQD films. Both time-resolved infrared spectroscopy and transient device characterization indicate that the scheme leads to a shallower trap state distribution than the best organic ligands. Solar cells fabricated following this strategy show up to 6% solar AM1.5G power-conversion efficiency. The CQD films are deposited at room temperature and under ambient atmosphere, rendering the process amenable to low-cost, roll-by-roll fabrication.     

Patterned polymer carpets

For the development of polymer carpets as active devices for micro- and nanotechnology, a control of the polymer carpet morphology and especially control of the stimulus responsive polymer brush is needed. Here, we report on the first example for the fabrication of patterned polymer carpets. On a two-dimensional framework of fully crosslinked and chemically patterned nanosheets, polymer brushes of styrene and 4-vinyl pyridine were grafted by self-initiated surface photopolymerization and photografting (SIPGP). It was found that polymer grafting by SIPGP occurred over the entire nanosheets but with a preferred grafting on the amino functionalized nanosheet areas. This results in continuous polymer carpets with an intact nanosheet framework but with amplification of the chemical patterning into a three dimensional topography of the grafted polymer brush. In the case of negative patterned nanosheets, the patterned carpet could be prepared as freestanding ultrathin membranes. Furthermore, swelling experiments with poly(4-vinyl pyridine) carpets showed that the patterns induces a directional buckling of the flexible polymer carpet. This may open the possibility of the development of micro- or nanoactuator devices with anisotropic responds upon environmental changes.     

Stereo cloud‐top height retrieval with ASTER and MISR

The combined multi‐view photogrammetric retrieval of cloud‐top height (CTH) from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and the Multi‐angle Imaging SpectroRadiometer (MISR) is discussed. Although ASTER was designed mainly for land applications, the synergistic use of MISR and ASTER is shown to be valuable for 3D cloud analysis. A new cloud‐adapted matching algorithm based on least‐squares matching (LSM) was used for the photogrammetric processing of both MISR and ASTER. The methods were applied to an ASTER scene over Zürich‐Kloten, Switzerland, in April 2002, which was acquired on‐demand. This case study, with coincident ASTER, MISR and Meteosat‐6 10‐minute Rapid Scans, is treated in detail. As a matching validation option it is shown that, by chance, the cloud motion error for the MISR An‐Aa and ASTER stereo CTHs is approximately the same, independent of the actual cloud height and cloud motion. It was therefore possible to evaluate the accuracy of the MISR An‐Aa matching versus the ASTER matching, independent of artefacts due to the subsequent wind correction. The results were also compared to the operational MISR L2TC stereo CTH results. The results obtained by each of these methods yield consistent values for CTH (uncorrected for wind motion).     

Der Einfluss kultureller Unterschiede beim IT-Offshoring

Recently, offshoring of information systems (IS) services to external vendors has seen considerable growth. Outsourcing to vendors in foreign countries causes unique challenges which need to be understood and managed effectively. This paper explores cultural differences in IS offshoring arrangements involving German client organizations that outsource application development activities to Indian vendors. For this purpose, a research framework is developed based on both theoretical considerations and specific empirical observations from multiple case studies. The goal is to (1) explore the nature of cultural differences in offshoring arrangements in depth and to (2) analyze the relationship between those cultural differences and offshoring success.     

Marginal Adaptation and Microbial Leakage at Conometric Prosthetic Connections for Implant-Supported Single Crowns: An In Vitro Investigation

Encouraging clinical results were reported on a novel cone-in-cone coupling for the fixation of dental implant-supported crowns (Acuris, Dentsply Sirona Implants, Mölndal, Sweden). However, the presence or absence of a microgap and a potential bacterial leakage at the conometric joint has not yet been investigated. A misfit and a resulting gap between the conometric components could potentially serve as a bacterial reservoir that promotes plaque formation, which in turn may lead to inflammation of the peri-implant tissues. Thus, a two-fold study set-up was designed in order to evaluate the bidirectional translocation of bacteria along conometrically seated single crowns. On conometric abutments filled with a culture suspension of anaerobic bacteria, the corresponding titanium nitride-coated (TiN) caps were fixed by friction. Each system was sterilized and immersed in culture medium to provide an optimal environment for microbial growth. Positive and negative controls were prepared. Specimens were stored in an anaerobic workstation, and total and viable bacterial counts were determined. Every 48 h, samples were taken from the reaction tubes to inoculate blood agar plates and to isolate bacterial DNA for quantification using qrt-PCR. In addition, one Acuris test system was subjected to scanning electron microscopy (SEM) to evaluate the precision of fit of the conometric coupling and marginal crown opening. Throughout the observational period of one week, blood agar plates of the specimens showed no viable bacterial growth. qrt-PCR, likewise, yielded a result approaching zero with an amount of about 0.53 × 10⁻⁴ µg/mL DNA. While the luting gap/marginal opening between the TiN-cap and the ceramic crown was within the clinically acceptable range, the SEM analysis failed to identify a measurable microgap at the cone-in-cone junction. Within the limits of the in-vitro study it can be concluded that the Acuris conometric interface does not allow for bacterial translocation under non-dynamic loading conditions.     

SMRs – overview,international developments,safety features and the GRS simulation chain

The Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) gGmbH as the main technical support organization for the German Federal Government in nuclear safety has been dealing with small modular reactors (SMRs) for about one decade since SMRs are one interesting option for new builds in most countries worldwide which continue to use nuclear energy for commercial electricity production. Currently four different SMR designs are in operation, four in construction, one is licensed, and further 12 are in a licensing process. In this paper, definitions, history, and current developments of SMRs are presented. Subsequently, selected trends of SMR development such as factory fabrication and transport, compactness and modularity, core design, improved core cooling, exclusion of accidents, features for preventing and limiting the impact of severe accidents, economic viability, competitiveness and licensing are discussed. Modeling gaps of the GRS simulation chain programs with a view to applications in nuclear licensing procedures are identified and a strategy for closing these gaps is presented. Finally, selected work on the extension and improvement of the simulation chain and first generic test analyses are presented.