Tunable microfluidic microlenses

A novel type of liquid microlens, bounded by a microfabricated, distensible membrane and activated by a microfluidic liquid-handling system, is presented. By use of an elastomer membrane fabricated by spin coating onto a dry-etched silicon substrate, the liquid-filled cavity acts as a lens whereby applied pressure changes the membrane distension and thus the focal length. Both plano-convex and plano-concave lenses, individual elements as well as arrays, were fabricated and tested. The lens surface roughness was seen to be approximately 9 nm rms, and the focal length could be tuned from 1 to 18 mm. This lens represents a robust, self-contained tunable optical structure suitable for use in, for example, a medical environment.     

Importance-driven feature enhancement in volume visualization

This paper presents importance-driven feature enhancement as a technique for the automatic generation of cut-away and ghosted views out of volumetric data. The presented focus+context approach removes or suppresses less important parts of a scene to reveal more important underlying information. However, less important parts are fully visible in those regions, where important visual information is not lost, i.e., more relevant features are not occluded. Features within the volumetric data are first classified according to a new dimension, denoted as object importance. This property determines which structures should be readily discernible and which structures are less important. Next, for each feature, various representations (levels of sparseness) from a dense to a sparse depiction are defined. Levels of sparseness define a spectrum of optical properties or rendering styles. The resulting image is generated by ray-casting and combining the intersected features proportional to their importance (importance compositing). The paper includes an extended discussion on several possible schemes for levels of sparseness specification. Furthermore, different approaches to importance compositing are treated.     

Crystalline Intermediate Phases in the Sol–Gel-Based Synthesis of La2NiO4+δ

X-ray diffraction and transmission electron microscopy were applied to investigate a sol–gel synthetic process for the mixed oxygen ion and electron conductor La₂NiO_4+δ with a K₂NiF₄ structure type. The development of the La₂NiO_4+δ is elucidated considering the influence of calcination temperatures and dwell times. Following the thermal decomposition of nitrate and organic precursors in an intermediate step, the lanthanum nickel oxide is obtained after a short dwell time above 750°C. This occurs by the transformation of an ultrafinely dispersed powder consisting of lanthanum oxycarbonate, lanthanum oxide, and nickel oxide. The pure La₂NiO_4+δ phase was obtained by similar solid-state reactions between nanocrystalline powder particles at just 950°C.     

Discovery of Riociguat (BAY 63‐2521): A Potent,Oral Stimulator of Soluble Guanylate Cyclase for the Treatment of Pulmonary Hypertension

Direct stimulation of soluble guanylate cyclase (sGC) represents a promising therapeutic strategy for the treatment of a range of diseases, including the severely disabling pulmonary hypertension (PH). Optimization of the unfavorable DMPK profile of previous sGC stimulators provided riociguat, which is currently being investigated in phase III clinical trials for the oral treatment of PH.

     

Geographical origin classification of olive oils by PTR-MS

The volatile compositions of 192 olive oil samples from five different European countries were investigated by PTR-MS sample headspace analysis. The mass spectra of all samples showed many masses with high abundances, indicating the complex VOC composition of olive oil. Three different PLS-DA models were fitted to the data to classify samples into ‘country’, ‘region’ and ‘district’ of origin, respectively. Correct classification rates were assessed by cross-validation. The first fitted model produced an 86% success rate in classifying the samples into their country of origin. The second model, which was fitted to the Italian oils only, also demonstrated satisfactory results, with 74% of samples successfully classified into region of origin. The third model, classifying the Italian samples into district of origin, yielded a success rate of only 52%. This lower success rate might be due to either the small class set, or to genuine similarities between olive oil VOC compositions on this tight scale.     

Influence of processing on stability,microstructure and thermoelectric properties of Ca3Co4 − xO9 + δ

Due to high figure of merit, Ca₃Co_4 ? xO_9 + δ (CCO) has potential as p-type material for high-temperature thermoelectrics. Here, the influence of processing including solid state sintering, spark plasma sintering and post-calcination on stability, microstructure and thermoelectric properties is reported. By a new post-calcination approach, single-phase materials were obtained from precursors to final dense ceramics in one step. The highest zT of 0.11 was recorded at 800 °C for CCO with 98 and 72% relative densities. In situ high-temperature X-ray diffraction in air and oxygen revealed a higher stability of CCO in oxygen (～970 °C) than in air (～930 °C), with formation of Ca₃Co₂O₆ which also showed high stability in oxygen, even at 1125 °C. Since achievement of phase pure high density CCO by post-calcination method in air is challenging, the phase stability of CCO in oxygen is important for understanding and further improvement of the method.     

Transparente leitfähige Nitride

Transparent conductive nitrides – New perspectives in device design More than 20 years after the pioneer of the GaN LED Nobel laureate Shuji Nakamura published that germanium is an inferior dopand for GaN when compared to silicon we showed that the opposite is true in regard of achievable n-type doping concentration. With Ge-doped GaN now device performance can be improved and new device structures realized. As transparent highly conductive nitride (TCN) new application fields emerge for GaN, in particular the replacement of ITO. Besides many potential applications Ge-doped GaN layers also show interesting physics as a new quasiparticle, the Collexon.     

Covalent Linkage and Macrocylization Preserve and Enhance Synergistic Interactions in Catalytic Amyloids

The self-assembly of short peptides into catalytic amyloid-like nanomaterials has proven to be a powerful tool in both understanding the evolution of early proteins and identifying new catalysts for practically useful chemical reactions. Here we demonstrate that both parallel and antiparallel arrangements of β-sheets can accommodate metal ions in catalytically productive coordination environments. Moreover, synergistic relationships, identified in catalytic amyloid mixtures, can be captured in macrocyclic and sheet-loop-sheet species, that offer faster rates of assembly and provide more complex asymmetric arrangements of functional groups, thus paving the way for future designs of amyloid-like catalytic proteins. Our findings show how initial catalytic activity in amyloid assemblies can be propagated and improved in more-complex molecules, providing another link in a complex evolutionary chain between short, potentially abiotically produced peptides and modern-day enzymes.     

Experimental Investigations of Machinability in the Turning of Compacted Graphite Iron using Minimum Quantity Lubrication

Unique mechanical properties of the compacted graphite iron (CGI) attracted attention of manufacturers and suppliers mainly in automotive industry in last decades. However due to the low machinability of the CGI material, more efficient machining strategies need to be implemented. Improvement in the cost-effective and environmentally sensitive processing of compacted graphite iron (CGI) is one of the major concerns of the manufacturing world because of the allure of CGI's mechanical properties. This study assesses the efficiency of minimum quantity lubrication (MQL) in CGI turning when compared to the dry-cutting condition. The turning tests were conducted across a wide range of cutting parameters: three different cutting speeds (100, 200, 300 m/min) and three different feed rates (0.1, 0.2, 0.3 mm/rev), all at a constant depth of cut (1 mm). The MQL efficiency is evaluated through cutting force and surface roughness measurements, optical and SEM analyses of chip formation and tool-wear analysis. The results showed that MQL usage provided a reduction in the resultant cutting forces by 2–5%, a reduction in surface roughness by 25%. The SEM analysis also revealed much clearer and smoother cutting edges on tool surfaces used in the MQL tests.