Component vs. system burn-in techniques for electronic equipment

Simulation can be used to determine the effects of different combinations of in-process and system burn-in times. It is shown that optimal burn-in at each stage of component assembly is not always optimal for the final system. Simulation is used to evaluate a nonrepairable system and provides individual component burn-in times that optimize the mean residual life of the assembled system     

Leakage of Anthocyanins from Skin of Thawed, Frozen Highbush Blueberries (Vaccinium corymbosum L.)

Factors affecting the tendency of thawed blueberries to leak pigmented exudate were investigated. Drip and anthocyanin leakage rates (ALR) were determined spectrophotometrically. Leakage vs time curves were linear or two-phase linear, ALR varying with cultivar, ripeness, and berry condition. Dewaxing increased ALR with most cultivars. ALR did not correlate with berry anthocyanin content, surface area, or cuticle thickness. ALR and amount of drip were poorly correlated. ALR varied from berry-to-berry within samples. Leakage was observed to be nonuniform on berry surfaces, appearing at skin cracks and ruptures, the calyx area, and other point sources. An hypothesis relating leakage to skin condition, fluid accumulation, and anthocyanin content is presented.     

Uptake of 226radium and 228radium by the lichen genus Umbilicaria

The 226Ra and 228Ra content of the lichens Umbilicaria cylindrica, U. deusta, U. murina and U. hirsuta has been determined as a function of the growth altitude above sea level, based on data derived from material collected from localities in southwest Poland. These data are interpreted as graphs and formulae to show the influence of environmental factors, particularly altitude, on the concentration of 226Ra and 228Ra, and the coefficients of accumulation calculated.     

Stress birefringence in compressible polymer fibres with irregular transverse sections

From an interferometric point of view a mathematical formula is developed for computing the exact optical path variations associated with a deformed cross-section of a fibre due to the drawing process. Fizeau fringes in transmission crossing Perlon fibres are obtained to illustrate the experimental applicability of the new corrected formula. The correction term is expressed as a function of the material compressibility, applied stress and the draw ratio. The birefringence of Perlon fibres is changed mechanically according to two different mechanisms in successive ranges of draw ratio. The mechanical response of Perlon fibres is found to be dependent on the direction with respect to the fibre axis. Another term is suggested to describe the mechanical anisotropy of a polymer. Microinterferograms are given for illustration.     

Truncation of CPC solar collectors and its effect on energy collection

Analytic expressions are derived for the angular acceptance function of two-dimensional compound parabolic concentrator solar collectors (CPC's) of arbitrary degree of truncation. Taking into account the effect of truncation on both optical and thermal losses in real collectors, we also evaluate the increase in monthly and yearly collectible energy. Prior analyses that have ignored the correct behavior of the angular acceptance function at large angles for truncated collectors are shown to be in error by 0–2% in calculations of yearly collectible energy for stationary collectors.     

Kinetic studies of the electrochemical reaction between lithium and phthalocyanine II. Reduction reaction mechanism

The effects, during formation, of current density, charge capacity, and concentration and temperature of H₂SO₄ electrolyte on the capacity of tubular electrodes in lead/acid batteries have been studied. Electrode capacity was found to be maximum at a H₂SO₄ concentration of 1.05 sp. gr., a charge amount of 250% theoretical capacity, a current density of 0.44 A dm^?2, and an electrolyte temperature of 40 °C. A study of the soaking process for tubular electrodes showed the electrode capacity to be maximum when the acid absorption was about 170 mg of H₂SO₄ per g of oxide. Finally, the discharge overpotential of tubular electrodes was analyzed by a galvanostatic transient method.     

A new low-energy ion implanter for bombardment of cylindrical surfaces

An ion implanter of cylindrical geometry is described suitable for uniform implantation at a few keV of inert gas ions of narrow energy distribution into conducting targets of axial symmetry. For helium implantation the ion current in the present device can easily be maintained at over 1 mA, allowing high dose implantation of large areas (several tens of cm²) in minutes. For temperature control of the target, a thermal shunt is incorporated. The sizes and the implantation energy of the device are scalable. Reactive gases can also be implanted with the device when operated at lower pressures and ion currents.