A multisource energy harvesting utilizing highly efficient ferroelectric PMN-PT single crystal

This paper demonstrates a multi-source energy harvester that is able to utilize simultaneously both piezoelectric and pyroelectric effects in lead magnesium niobate-lead titanate (PMN-PT) single crystal. The paper presents a study of PMN-PT single crystal with a (67:33) composition grown in our laboratory via a vertical gradient freeze method without any flux. The performance of the piezoelectric and pyroelectric energy harvester using unimorph device structure was evaluated via modeling and experiment. The theoretical study was implemented based on a distributed parameter electromechanical model and the modelling procedure was approximated using finite element analysis to predict the electromechanical behavior of the harvester. The maximum power density at a resonance frequency of 50 Hz and optimum resistance of 2 MΩ was 16.7 nW/(g² cm³) under a 1 g acceleration of vibration. The measured values of electrical output parameters were in good agreement with theoretical and modelling results using MATLAB and COMSOL Multiphysics, respectively. By using the pyroelectric effect along with the piezoelectric effect, the output voltage of the energy harvester was found to be enhanced at the optimum resistance and specific frequency values. It was noticed that the output voltage was increased monotonically with temperature-difference (ΔT) and reaches up to 180 % of its original value under temperature difference of 1.7 °C at a frequency value of 49 Hz.     

Preparation of anchored ceramic coatings on metal substrates: a modified sol-gel technique using colloidal silica sol

A single-step dip-coating technique was developed to produce stable films or washcoats of controlled thickness, surface area and pore-size distribution on alumina whisker-covered metal substrates (both flat plates and monoliths). Dip-coating slurries were prepared by dispersing fine porous powder in a colloidal silica sol. The method provided control over coating thickness and coating properties, such as pore-size distribution and surface area. The coating thickness could be varied between approximately 2 and 40 m by selecting slurry composition and withdrawal speed in the dipping procedure. The pore-size distribution and surface area could be varied by changing type and amount of porous filler material in the dipping slurry. Uniform and bimodal pore-size distributions were obtained using silica and ZSM-5 molecular sieves, respectively, yielding coatings with surface areas between 60 and 400 m²g^–1.     

Valve controlled fluorescence detection system for remote sensing applications

We demonstrate a microfluidics-based fluorescence detection device where the filters, source, detector, and electronically controlled valves are embedded into a Polydimethylsiloxane (PDMS)-based microfluidic chip. The device reported here has been specifically designed for chlorophyll a fluorescence sensing in autonomous systems, such as oceanic applications. In contrast to a monolithic approach, the modular approach made the fabrication of this device simpler and cheaper. For fluorescence detection, an InGaN/GaN LED is used as the excitation source to specifically excite chlorophyll a; a metal-dielectric Fabry?CPerot filter was used to extinguish out-of-band excitation. A simple Si photodiode is used as detector and provided with a thermally evaporated CdS emission filter to block the excitation source. This filter combination provides an excellent solution to the difficult problem of combining high-rejection excitation and emission filters in an integrated thin-film format. Furthermore, the metal-dielectric filter provides a much broader angular response than a comparable multilayer Bragg mirror, which is a key advantage in the integrated format. We use a novel paraffin wax-based valve design affords low power single-use actuation, between 0.5 and 1 J per actuation and withstands 0.6 bar differential pressure, which provides better performance than its previously reported counterparts. The remote valve-controlled operation of the fluorescence detection system is demonstrated, illustrating the measurement of a chlorophyll a solution, with a detection limit of 340 ??M and subsequent valve-controlled flushing of the measurement reservoir.     

Implementing enterprise resource planning systems: organizational performance and the duration of the implementation

This paper examines the impact of the duration of ERP implementation on firm performance both during and after implementation. Organizations choose either an accelerated implementation approach or a traditional (longer) implementation approach. The former approach gives the organization the advantage of speed, but the disadvantage of fitting its processes to that of a packaged (thus, undifferentiated from competitors) ERP. The latter approach allows the organization to redesign strategy and processes, and thus, search for ways to be unique from its competition. The study uses a regression model to capture the changes in various performance measures during and after implementation between firms that implemented the ERP, using the performance measure of a matched group of firms that did not implement an ERP as a benchmark/control sample, on the basis of the duration of the implementation. Financial data from Compustat, and data on start date and end date of ERP implementation between 1990 and 2005 for firms in the Oil and Gas industry was collected from an ERP vendor. Results show that measures such as return on sales improved after implementation. However, measures such as inventory turnover, which reflect operational benefits, improve during implementation. We find that accelerated implementation confers both operational and strategic benefits. This study highlights the strategic consequences of the different choices of implementation.     

Reinterpretable Imager: Towards Variable Post‐Capture Space,Angle and Time Resolution in Photography

We describe a novel multiplexing approach to achieve tradeoffs in space, angle and time resolution in photography. We explore the problem of mapping useful subsets of time‐varying 4D lightfields in a single snapshot. Our design is based on using a dynamic mask in the aperture and a static mask close to the sensor. The key idea is to exploit scene‐specific redundancy along spatial, angular and temporal dimensions and to provide a programmable or variable resolution tradeoff among these dimensions. This allows a user to reinterpret the single captured photo as either a high spatial resolution image, a refocusable image stack or a video for different parts of the scene in post‐processing. A lightfield camera or a video camera forces a‐priori choice in space‐angle‐time resolution. We demonstrate a single prototype which provides flexible post‐capture abilities not possible using either a single‐shot lightfield camera or a multi‐frame video camera. We show several novel results including digital refocusing on objects moving in depth and capturing multiple facial expressions in a single photo.     

Fuzzy distributed cooperative tracking for a swarm of unmanned aerial vehicles with heterogeneous goals

This article proposes a systematic analysis for a tracking problem which ensures cooperation amongst a swarm of unmanned aerial vehicles (UAVs), modelled as nonlinear systems with linear and angular velocity constraints, in order to achieve different goals. A distributed Takagi–Sugeno (TS) framework design is adopted for the representation of the nonlinear model of the dynamics of the UAVs. The distributed control law which is introduced is composed of both node and network level information. Firstly, feedback gains are synthesised using a parallel distributed compensation (PDC) control law structure, for a collection of isolated UAVs; ignoring communications among the swarm. Then secondly, based on an alternation-like procedure, the resulting feedback gains are used to determine Lyapunov matrices which are utilised at network level to incorporate into the control law, the relative differences in the states of the vehicles, and to induce cooperative behaviour. Eventually stability is guaranteed for the entire swarm. The control synthesis is performed using tools from linear control theory: in particular the design criteria are posed as linear matrix inequalities (LMIs). An example based on a UAV tracking scenario is included to outline the efficacy of the approach.     

A compact printed multistubs loaded resonator rectangular monopole antenna design for multiband wireless systems

In the present article, a compact triple‐band multistubs loaded resonator printed monopole antenna is proposed. The antenna consists of a quarter wavelength two asymmetrical inverted L‐shaped stubs to excite two resonant modes for 3.5/5.5 GHz bands and one integrated horizontally T‐shaped stub with inverted long L‐shaped stub to excite resonant mode for 2.5 GHz band. By loading these stub resonators along y‐axis with distinct gaps, the antenna resonates at three frequencies 2.57/3.52/5.51 GHz covering the desired bands while keeping compact size of 24 × 30 mm² (0.2 × 0.25 ). The proposed antenna is fabricated on Rogers RT/duroid 5880 substrate with thickness 0.79 mm and its performance experimentally verified. The measured results reveal that the antenna has the impedance bandwidths of about 210 MHz (2.50‐2.71 GHz), 260 MHz (3.37‐3.63 GHz), and 650 MHz (5.20‐5.85 GHz), for 2.5/3.5/5.5 GHz WiMAX and 5.2/5.8 GHz WLAN band systems. The antenna provides omnidirectional radiation patterns and flat antenna gains over the three operating bands. In addition, the design approach and effects of multistubs resonator lengths on the operating bands are also examined and discussed in detail.     

Kinetics of alpha precipitation in Ti-6 wt % Cr and Ti-11 wt % Mo

The morphology and kinetics of the precipitation of the alpha phase produced by two different heat treatment routes, namely, (a) direct isothermal decomposition and (b)-quenching and subsequent ageing, were studied. In isothermally decomposed samples the (supersaturated) + transformation was seen to occur mainly through the discontinuous growth of the transformed zone consisting of groups of parallel side plates from the grain boundary regions towards the interior of the grain. Unlike for the case of a regular discontinuous precipitation, here the transformed regions are not separated from the untransformed by an incoherent interface and the growing-plates do obey a fixed orientation relationship with the grain from which they are evolved. The theory of cellular reaction has been applied to explain the growth rate of the duplex ( + ) region. The overall reaction kinetics were analysed on the basis of the Johnson-Mehl formulation and were found to be consistent with that of a discontinuous precipitation reaction, where grain boundary nucleation sites were saturated at an early stage of the transformation. The structure of the-quenched samples showed a uniform distribution of athermal omega particles which acted as precursors to the-precipitates. As a consequence, the reaction rate was greatly enhanced and-precipitation in the quenched and aged samples was seen to occur continuously in the entire body of the grain.     

RAPID ONLINE MONITORING OF A HETEROGENEOUS CATALYST BY A PULSED REACTOR COUPLED TO GC-MS

A rapid screening system for heterogeneous catalyst discovery has been developed by coupling an in-house designed and fabricated high temperature vapor phase pulse reactor on-line to a GC-MS. The incorporation of gas chromatography for separation of the products with the mass spectrometry system allowed simultaneous identification and determination of reaction products and substrate conversion. This system was employed to study the vapor phase catalytic hydride transfer reduction (CHTR) of nitrobenzene with methanol as hydrogen donor on an MgO catalyst as a model reaction. Structural information of all the by-products that were formed was useful to understand the reaction mechanism. The products obtained with the new screening technique were in good agreement with conventional bench scale experiments. The rapid online screening provided an efficient methodology for optimization of reaction conditions such as catalyst loading, reaction temperature, and mole ratios. Response Surface Methodology (RSM) was used to optimize the conversion of reactants and selectivity of products.     

Low cycle fatigue,fatigue crack propagation and substructures in a series of polycrystalline Cu-Al alloys

Low Cycle Fatigue (LCF) on smooth hour glass specimens and Fatigue Crack Propagation (FCP) studies on Single Edge Notch (SEN) specimens were carried out at room temperature on four Cu-Al polycrystalline alloys to investigate the effects of Stacking Fault Energy (SFE) and mechanical property variations on fatigue characteristics. Significant improvements in fatigue properties were observed for alloys of low SFE. A microhardness technique was used to delineate the fatigue plastic zone ahead of stopped cracks at several stress intensity ranges for all the alloys. Planar slip was associated with a less than a second power dependence of plastic zone size on the stress intensity range. Transmission Electron Microscopy (TEM) was used to observe the substructures that developed both in LCF at different strain ranges and also ahead of fatigue cracks at different stress intensity ranges. Fractography was carried out to study the micromechanisms of crack propagation using a two stage replication technique. The experimental results were in good agreement with a theoretical model for FCP developed previously by the authors which incorporates mechanical and microstructural variables.