Mathematical modelling and its use for design of feeding strategies for L‐Sorbose fermentation

Batch sorbitol to sorbose bioconversion by Acetobacter suboxydans using initial sorbitol concentration (S₀ = 100 g/L) yielded a productivity of 10.11 g/L‐h and 98.6% conversion in 10 h time. The batch kinetics was then used to develop an unstructured mathematical model. Model parameters were identified using a nonlinear regression technique assisted by a computer program which minimized the deviation between the model predictions and actual batch experimental data. F test indicated 99% confidence on the prediction of model using optimized parameters. The batch model was eventually extrapolated to identify nutrient feeding strategies to maintain constant noninhibitory sorbitol supply and eliminate substrate limitation for fed‐batch fermentation in order to improve the sorbose productivity. The adequacy of the fed‐batch model was established by excellent agreement between experimental data and model simulation (except towards the end of fermentation).     

New observations in micro-pop-in issues in nanoindentation of coarse grain alumina

The present experiments were focused on nanoindentation behaviour and the attendant “micro-pop-in” in a dense (～95% of theoretical) coarse-grain (～20 μm) alumina ceramic as a function of loading rate variations at three constant peak loads in the range of 10⁵–10⁶ μN. Based on the experimental results here we report for the first time, to the best of our knowledge, an increase in intrinsic nano scale contact resistance as well as the nanohardness with the loading rate. These observations were explained in terms of the correlation between the nanoscale plasticity and shear stress active just underneath the nanoindenter.     

Changes in volatile composition during fruit development and ripening of ‘Alphonso’ mango

BACKGROUND: Volatile blends of five developing and five ripening stages of mango (Mangifera indica L. cv. Alphonso) were investigated along with those of flowers and leaves. Raw and ripe fruits of cv. Sabja were also used for comparison. RESULTS: A total of 55 volatiles belonging to various chemical classes such as aldehydes, alcohols, mono‐ and sesquiterpene hydrocarbons, lactones and furanones were identified. In all Alphonso tissues monoterpenes quantitatively dominated, with 57–99% contribution; in particular, (Z)‐ocimene was found in the highest amount. Ripeness was characterized by the de novo appearance of lactones and furanones in the blend of monoterpenes. Sabja was distinguished by the abundance of monoterpene hydrocarbons in the raw fruit, and that of sesquiterpene hydrocarbons and their derivatives in the ripe stage. CONCLUSION: Various stages of the Alphonso fruit during transition from flower to ripe fruit are characterized by unique volatile signatures that are distinguished from each other by the qualitative and quantitative appearance of different volatile compounds. Thus volatiles can be highly informative markers while studying the development and ripening of mango. Copyright © 2009 Society of Chemical Industry     

Selective solid-phase extraction of rare earth elements by the chemically modified Amberlite XAD-4 resin with azacrown ether

A selective solid-phase extraction procedure using chemically modified Amberlite XAD-4 with monoaza dibenzo 18-crown-6 ether was investigated for the preconcentration and separation of La(III), Nd(III) and Sm(III) in synthetic solution. Before loading samples on synthesized adsorbent adjust pH 4.5 by suitable buffer solution. The adsorbed rare earth elements were eluted by 2 M hydrochloric acid. Various parameters like preconcentration, breakthrough capacity, flow rate were investigated. The limits of detection (n = 5) and limits of quantification (n = 5) for La(III), Nd(III) and Sm(III) were founded 3.9, 4.2 and 7.4 μg L^?1 and 13, 15 and 26 μg L^?1, respectively. The eluted metal ions were determined by ICP-AES.     

Solid dispersion adsorbate technique for improved dissolution and flow properties of lurasidone hydrochloride: characterization using 32 factorial design

The aim of the present study was to improve the dissolution and flow properties of lurasidone hydrochloride (LH) by solid dispersion adsorbate (SDA) technique. Solid dispersions (SDs) of LH were prepared by fusion method using Poloxamer P188. The melt dispersion was adsorbed onto the porous carrier Florite (calcium silicate). A 3² factorial design was employed to quantify the effect of two independent variables, namely ratio of carrier (Poloxamer 188) and LH in SD and ratio of adsorbent (Florite) to SD. SDA granules of LH were studied for flow properties and characterized using differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction. Tablets of optimized composition of SDA granules (equivalent to 20?mg of drug) and plain tablets were prepared by direct compression method. The dissolution studies were carried out in Mcllvaine buffer (pH 3.8) as per USFDA guidelines and characterized for parameters such as percent dissolution efficiency, t₅₀, and Q₃₀. Tablets prepared from SDA granules showed almost four-fold increase in cumulative percentage drug release as compared to tablets prepared from plain LH. The value of dissolution efficiency was enhanced from 49.60% for plain tablets to 94.15% for SDA tablets. SDA granules did not show any change in drug release and X-ray diffraction pattern after storage at 40?°C/75% of RH for 3?months, which confirms that Florite prevented conversion of drug from amorphous form to crystalline form improving physical stability of the amorphous state of LH.     

Measurements of chemical warfare agent degradation products using an electrophoresis microchip with contactless conductivity detector

This paper reports on a microfluidic device for the screening of organophosphonate nerve agent degradation products. The miniaturized system relies on an efficient chip-based separation of alkyl methylphosphonic acids (breakdown products of Sarin, Soman, and VX nerve agents) followed by their sensitive contactless conductivity detection. Experimental parameters relevant to the separation and detection processes have been optimized to yield high sensitivity (with 48-86 microg L(-1) detection limits), fast response (50 s for a three alkyl methylphosphonic acid mixture), high precision (RSD = 3.8-5.0%), and good linearity (over the 0.3-100 mg L(-1) range). Applicability to natural (river) water samples is demonstrated. The new microsystem offers promise for monitoring degradation products of chemical warfare agents, with advantages of speed/warning, efficiency, portability, sample size, and cost compared to conventional ion chromatography or capillary electrophoresis systems.     

The VVERs at KudanKulam

A Nuclear Power Project is being set-up at KudanKulam in the state of Tamil Nadu, India in collaboration with the Russian Federation. The project comprises of two units each of 1000 MWe VVER type reactor. The design of the plant and supply of all the major equipment is in the scope of the Russian Federation while development of infrastructure and project construction is in Indian scope of works. The VVER (Version V-412) reactor that is under construction at KudanKulam site is an advanced PWR, which incorporates all the features of a modern PWR as per the current Russian, Western and IAEA standards. The KudanKulam site in the southern Indian state of Tamil Nadu was one among the several sites evaluated by the Site Selection Committee, which cleared KudanKulam site for setting up an installed capacity up to 6000 MWe. The design, construction and operation of the plant meets the regulatory and licensing requirements of Russian regulatory body “RTN” as also India's Atomic Energy Regulatory Board. The supply of the equipment from the Russian Federation is on schedule and the project construction work by various Indian agencies is also ahead of schedule. The two units of KudanKulam Nuclear Power Project (KKNPP) are scheduled to achieve first criticality in the year 2007–2008. The paper discusses various design features, project construction and management aspects.     

A scalable manufacturing process for flexible active‐matrix e‐paper displays

Abstract— A scalable manufacturing process for fabricating active‐matrix backplanes on low‐cost flexible substrates, a key enabler for electronic‐paper displays, is presented. This process is based on solution processing, ink‐jet printing, and laser patterning. A multilayer architecture is employed to enable high aperture ratio and array performance. These backplanes were combined with E Ink electrophoretic media to create high‐performance displays that have high contrast, are bistable, and can be flexed repeatedly to a radius of curvature of 5 mm.     

Liquid‐crystal displays using printed plastic TFT backplanes

Abstract— In this paper, we present results from a new liquid crystal over plastic printed thin‐film‐transistor (TFT) display. The display demonstrator shows that the processing incompatibilities between the plastic TFT backplane and the liquid‐crystal materials can be addressed to make a stable twisted‐nematic structure. New fabrication processes such as the photo‐alignment of liquid crystals have made it possible to create a new generation of displays, which pave the way towards fully integrated plastic liquid‐crystal‐display technologies.     

Use of the nanoindentation technique for studying microstructure/crack interactions in the fatigue of 4340 steel

The objectives of this research are to study the influence of microstructure on the fatigue crack growth behavior in 4340 steel and to explore the application of the nanoindentation technique for determining the plastic deformation zone at a fatigue crack tip. Two heat treatment conditions were chosen for the steel: annealed and quenched plus tempered. The annealed steel consists of coarse pearlite and proeutectoid ferrite, while the quenched and tempered steel consists of fine tempered martensite. Fatigue crack propagation tests were conducted on disklike compact (DCT) specimens. Subsequently, the nanoindentation technique was applied to quantitatively determine the plastic deformation zone at fatigue crack tips. The plastic deformation zone size determined by the nanoindentation test seems larger than the cyclic deformation zone calculated using the fracture mechanics equation, which involves many assumptions. The fatigue crack growth test results show that the annealed steel has a higher resistance to crack growth than the quenched and tempered steel. The fatigue crack in the annealed steel tends to grow along pearlite domain boundaries, or the cementite/ferrite interfaces within a pearlite domain. In contrast, the fatigue crack in the quenched and tempered steel tends to traverse the fine martensite laths. Consequently, the actual crack path in the annealed steel is rougher than in the quenched and tempered steel and more secondary cracks are observed in the annealed steel.