Biochip with integrated pumps for plug-based sequential exchange of solutions

A novel method for exchanging solutions used in biochemical analyses and a device to carry out the exchange are proposed. An array of plugs formed using six injectors was transported in a microflow channel using a main pump located at one end of the main flow channel. The injectors and main pump were operated on the basis of the change in volume caused by the electrolysis of water. Bubbles were produced from working electrodes; these bubbles caused a diaphragm placed below the injectors to inflate and occlude the inlet of the solution reservoir. Increase in the number of bubbles caused the reservoir to inject the solution into the main flow channel in the form of a plug. Each plug was individually transported downstream to the sensing area by the main pump, which was operated in a similar manner to the injector. The device was used for the detection of a tumor marker, α-fetoprotein (AFP). Plugs of necessary solutions were individually transported to the sensing area with immobilized primary antibodies to allow antigen–antibody binding, cleaning, and detection. The fluorescence intensity from the antibodies showed clear dependence on the concentration of AFP. The immobilization of antibodies could also be carried out on-chip.     

DESCRIPTION OF A THERMO-INELASTIC BODY WITH A MOVING SOLID/LIQUID INTERFACE AND SIMULATION OF THE WELDING PROCESS

Conservation laws of mass, momentum, and energy for the thermo-inelastic body in the region involving the moving interface between the solid and liquid are introduced to derive jump conditions of velocity, stress, and energy on the interface as the sequence of local form for the generalized Reynolds transport theorem. The jump condition of energy is revealed to be the generalized Stefan condition for moving interface problems. The finite element formulation is used to analyze the modes of flow, deformation, and stresses in a melting or solidifying process by employing a viscoplastic constitutive equation that describes the mechanical behavior of both the solid and liquid phases. The mathematical formalism is applied to simulate bead-on plate welding.     

Fabrication and characterization of polyterpenol as an insulating layer and incorporated organic field effect transistor

A non-synthetic polymer material, polyterpenol, was fabricated using a dry polymerization process namely RF plasma polymerization from an environmentally friendly monomer and its surface, optical and electrical properties investigated. Polyterpenol films were found to be transparent over the visible wavelength range, with a smooth surface with an average roughness of less than 0.4 nm and hardness of 0.4 GPa. The dielectric constant of 3.4 for polyterpenol was higher than that of the conventional polymer materials used in the organic electronic devices. The non-synthetic polymer material was then implemented as a surface modification of the gate insulator in field effect transistor (OFET) and the properties of the device were examined. In comparison to the similar device without the polymer insulating layer, the polyterpenol based OFET device showed significant improvements. The addition of the polyterpenol interlayer in the OFET shifted the threshold voltage significantly; + 20 V to −3 V. The presence of trapped charge was not observed in the polyterpenol interlayer. This assisted in the improvement of effective mobility from 0.012 to 0.021 cm²/Vs. The switching property of the polyterpenol based OFET was also improved; 10⁷ compared to 10⁴. The results showed that the non-synthetic polyterpenol polymer film is a promising candidate of insulators in electronic devices.     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

直流分量电流作CV电缆老化诊断方法的现场运用探讨

介绍在实际敷设电缆时如何有效消除杂散电流以期提高直流分量电流进行ＣＶ电缆老化监测的测试精度。     

Effects of veterinary drugs on beta-hexosaminidase release from rat basophilic leukemia cells (RBL-2H3)

Little is known about the effects of residual veterinary drugs on the allergic reaction, except for the antigenicity of antibiotics and synthetic antimicrobials. Therefore, 59 kinds of veterinary drugs were investigated for their effects on the IgE receptor-mediated beta-hexosaminidase release from RBL-2H3 cells as an index of immediate allergic reaction. We found that the antibiotics chlorotetracycline, doxycycline, monensin, the synthetic antimicrobial pyrimethamine and the steroid hormone testosterone inhibited beta-hexosaminidase release. Most of the veterinary drugs showed no action, though the ionophores lasalocid, salinomycin and the steroid hormone hexestrol promoted beta-hexosaminidase release from injured cells. Based on the residual levels of these drugs and the frequencies of detection in actual food samples, it seems unlikely that these drugs have any immediate allergic effect in practice.     

Production of lepidimoide by an endophytic fungus from polysaccharide extracted from Abelmoschus sp.: identification of the product and the organism producing it

A highly potent allelopathic factor, lepidimoide, was initially extracted from mucilage of germinated cress seeds. Polysaccharide extracted from okra (Abelmoschus esculentum Moench) is considered to have a similar structure to lepidimoide as its repeating unit. We therefore initiated the screening of enzymes capable of degrading okra polysaccharide into lepidimoide from endophytes. We discovered an endophytic fungal strain AHU9748 isolated from Coleus galeatus, which produced an oligosaccharide having similar properties to lepidimoide on thin layer chromatography. The physico-chemical data from ESI-MS, NMR spectra and other analyses also showed the purified product to be identical to lepidimoide. The strain AHU9748 was identified as a fungus belonging to the coelomycetes, closely related to the genus Colletotrichum, based on morphological characteristics and sequence analysis of the 18S rDNA and ITS region.     

A novel gene delivery system in plants with calcium alginate micro-beads

We have produced micrometer-sized calcium alginate beads referred to as "bio-beads" that encapsulate plasmid DNA molecules carrying a reporter gene. In order to evaluate the efficiency of the bio-beads in mediating genetic transfection, protoplasts isolated from cultured tobacco cells (BY-2) were transfected with bio-beads containing a plasmid that carries the modified green fluorescent protein gene CaMV35S-sGFP. With the bio-beads treatment, approximately ten-fold higher GFP expression was observed after 24 h incubation compared to that with the conventional method using a naked plasmid solution. Transfection was up to 0.22% efficient. These results indicate that bio-beads have a possibility for efficient transformation in plants.     

Hairpin-based state machine and conformational addressing: Design and experiment

In this paper, we propose a new architecture for a multi-state DNA machine whose conformation of repeated hairpin structures changes sequentially in response to input oligomers. As an application of the machine, we also propose molecular memory in which the machine is used as a memory unit. Addressing in the memory is realized through state transitions of the machine. We then describe a method for designing DNA sequences of the machine, which exhaustively checks conformational changes of the machine by dividing its secondary structure into hairpin units. The method is based on the minimum free energy of the structure, the structure transition paths, and the total frequency of optimal and suboptimal structures. DNA sequences designed by the method were tested in a chemical experiment in which a machine consisting of two hairpins was actually constructed. As a result, we verified that the multi-state DNA machine realized the expected changes in its secondary structure.