Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.     

Inter-comparison of various global sea surface temperature products

In this study, eight global sea surface temperature (SST) products for 2009 are compared to clarify their characteristics. The median of eight daily values, the Ensemble Median as Reference Product (EMRP), is used as a reference product for inter-comparison. The results show that the absolute value of mean differences and the value of root mean square (RMS) differences are higher in single-microwave products such as Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E), Tropical Rainfall Measuring Mission Microwave Imager (TMI), and WindSat, than in products such as MicroWave Optimally Interpolated SST (MWOI), Merged satellite and in situ data Global Daily SST (MGD), and Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) constructed by merging several SST data. It is of note that the characteristics of SST products depend on the type of SST used within the product, rather than the data source used. A comparison of SST products was also conducted using EMRP and data observed by moored buoys. The results show that only AMSR-E has a warm bias (+0.06°C) while other products have a cool bias (maximum value ?0.10°C). The RMS error of TMI is the highest (0.57°C), and that of EMRP the lowest (0.28°C). Furthermore, the temporal variability between the data in each SST product was compared to those observed by the Kuroshio Extension Observatory (KEO) buoy. Results show that the temporal variability of EMRP corresponds well to that of buoy data, and that the RMS error of EMRP is lower than that of the other SST products.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

Electrochemically reduced Pt oxide thin film as a highly active electrocatalyst for direct ethanol alkaline fuel cell

The Pt oxide thin film and Pt thin film were prepared by reactive sputtering and the electrocatalytic activity of the ethanol oxidation reaction was investigated in a KOH solution for developing the alkaline direct ethanol fuel cells. After electrochemical reduction by passing a cathodic electric charge, the Pt oxide thin film showed 29 times larger ethanol oxidation current than the Pt thin film. This superior activity was caused by an increase in the electrochemical active surface area and the existence of residual oxygen, which was confirmed by cyclic voltammetry and XPS measurement. Due to the contribution of the residual oxygen, the rate-determining step of the ethanol oxidation reaction might change, because the Tafel slope of the Pt oxide thin film during the ethanol oxidation reaction was changed by electrochemical reduction. Despite the total Pt amount in the Pt oxide thin film being smaller than that in the Pt thin film, the Pt oxide thin film showed excellent ethanol oxidation activity. Therefore, the Pt oxide treated by electrochemical reduction may be a promising anode catalyst for the direct ethanol fuel cells.     

Determination of Thermoelectric Module Efficiency: A Survey

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.     

Optical manipulation of multiple stable states in photorefractive four-wave mixing

Abstract

We propose an approach to manipulate the convergence in multiple solutions of phase conjugate reflectivity in photorefractive four-wave mixing. Although a method forcibly adding a π-phase shift to an incident beam has been already proposed to control the reflectivity, some restrictions have been required in the boundary conditions for the successful operation. Here, we control the reflectivity with the boundary conditions in which the phase shift operation is ineffective by itself. In our method, the phase shift operation is combined with the procedure of turning an incident beam on and off. With a numerical analysis of four-wave mixing, we show that our new approach brings drastic change in the spatial distribution of the index grating and leads the phase conjugate reflectivity which was not manipulated previously.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

Well‐defined,environment‐friendly synthesis of polypeptides based on phosgene‐free transformation of amino acids into urethane derivatives and their applications

In this study, both naturally occurring and artificial amino acids were successfully transformed into the corresponding urethane derivatives using diphenyl carbonate. The urethanes thus prepared could be efficiently cyclized into amino acid N‐carboxyanhydrides (NCAs) without the requirement of phosgene. In addition, the presence of primary amines converted the urethane derivatives into NCAs and initiated the ring‐opening polymerization of the in situ formed NCAs, allowing for the well‐defined synthesis of polypeptides. These polypeptides contained initiating ends functionalized by an amine‐derived residue and propagating ends bearing the reactive amino group. By precise control of the structures of the polypeptides, various polypeptide conjugates such as block copolymers and graft copolymers were successfully synthesized as designed, and their applications in antifouling coatings against proteins, drug delivery systems and biosensors were demonstrated. © 2019 Society of Chemical Industry