Analysis and assessment of a nanoparticle seeded small scale absorption refrigeration system driven by a low‐grade waste heat source

The thermoeconomic behaviour of a nanoparticle seeded single effect LiBr‐H₂O absorption refrigeration system (ARS) is investigated for a small scale application. In the proposed method, alumina nanoparticles with volume concentrations of 3%, 5%, and 7% are dispersed into an aqua lithium bromide solution. The multiobjective heat transfer search algorithm is employed to examine the design trade‐off between the coefficient of performance (COP) and total annualized cost (TAC). To analyze the overall performance of the system, the influence of five design parameters, namely the temperatures of the generator, absorber, evaporator, condenser and heat exchanger pipe diameter, are studied. It is found that with an increase in the COP, the TAC of the system is initially raised marginally, and after that, raised rigorously with further increment. The comparative results indicate that the COP and TAC of the nanofluid based ARS system are increased by about 7% and decreased by about 3.2%, respectively, corresponding to the Pareto points of the base ARS system. A lower break‐even point of about 2.6 years is achieved for the ARS system containing nanoparticles compared to the base ARS system. Overall, the ARS system containing 5% nanoparticles is the best solution from a thermodynamic and economic point of view.     

Aromatase and dual aromatase-steroid sulfatase inhibitors from the letrozole and vorozole templates

Concurrent inhibition of aromatase and steroid sulfatase (STS) may provide a more effective treatment for hormone‐dependent breast cancer than monotherapy against individual enzymes, and several dual aromatase–sulfatase inhibitors (DASIs) have been reported. Three aromatase inhibitors with sub‐nanomolar potency, better than the benchmark agent letrozole, were designed. To further explore the DASI concept, a new series of letrozole‐derived sulfamates and a vorozole‐based sulfamate were designed and biologically evaluated in JEG‐3 cells to reveal structure–activity relationships. Amongst achiral and racemic compounds, 2‐bromo‐4‐(2‐(4‐cyanophenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)ethyl)phenyl sulfamate is the most potent DASI (aromatase: IC₅₀=0.87 nM ; STS: IC₅₀=593 nM ). The enantiomers of the phenolic precursor to this compound were separated by chiral HPLC and their absolute configuration determined by X‐ray crystallography. Following conversion to their corresponding sulfamates, the S‐(+)‐enantiomer was found to inhibit aromatase and sulfatase most potently (aromatase: IC₅₀=0.52 nM ; STS: IC₅₀=280 nM ). The docking of each enantiomer and other ligands into the aromatase and sulfatase active sites was also investigated.     

A novel optical aerosol detector utilizing an optic fiber with conductive polymer coating

The detection of atmospheric aerosol particles is becoming an important issue in many fields such as environmental science, occupational medicine, semiconductor industry and material science. In the present paper, we utilized the conductive polymer, polypyrrole (PPy), as a sensitive membrane for detecting aerosol particles optically. A polymer optical fiber reflectance probe is constructed by depositing the PPy nanofilm at the end face of the fiber. The sensor principle relies on the change in the refractive index of the PPy nanofilm upon its interaction with aerosol nanoparticles and on the electrostatic induction between aerosol particles and the PPy nanofilm, which leads to a change in the reflected intensity. For preliminary evaluation of optical aerosol detector, three types of aerosol particles, NaCl, black carbon (BC) and polystyrene latex (PSL), are selected. The fabricated fiber optic reflectance probe using the PPy nanofilm shows distinct variations in the reflected light intensity depending on the type of aerosol particle and its properties. The proposed sensing approach may promote the use of conductive polymers in optical techniques for the detection of atmospheric aerosols.     

规范供电企业劳务外包合同文本的必要性

针对国家电网公司组织的历次审计、巡查工作中,劳务外包管理方面出现的"核心业务外包"、"假外包、真派遣"、无安全协议、无保密协议等问题,进行了深入调查分析,提出了规范供电企业劳务外包标准合同文本的主要做法,通过细化工作内容、要求、标准,明确发包方与承包方的义务和费用支付,增加安全、保密协议条款以及考核评价,进一步规范市县...     

Analysis of pressure profile and flow progression in the vacuum infusion process

New experimental set-ups are presented for measuring the pressure profile and fill-times in the Vacuum Infusion (VI) process. In these set-ups, the injection can either be from one of the mould faces (resulting in a rectilinear flow) or from a central port (resulting in a radial flow). From these measurements, the validity of previously reported analytical formulations is investigated. At the start of injection, the experimental results show a marked difference from analytical predictions. However, with flow progression, they change to match with analytical predictions. This phenomenon has not been observed previously and its analysis enhances the current understanding of the process physics, mainly the impact of compliance on the reinforcement thickness and flow progression.     

Performance analysis of a solar photovoltaic operated domestic refrigerator

This paper describes the fabrication, experimentation and simulation stages of converting a 165 l domestic electric refrigerator to a solar powered one. A conventional domestic refrigerator was chosen for this purpose and was redesigned by adding battery bank, inverter and transformer, and powered by solar photovoltaic (SPV) panels. Various performance tests were carried out to study the performance of the system. The coefficient of performance (COP) was observed to decrease with time from morning to afternoon and a maximum COP of 2.102 was observed at 7 AM. Simulations regarding economic feasibility of the system for the climatic conditions of Jaipur city (India) were also carried out using RETScreen 4. It was observed that the system can only be economically viable with carbon trading option taken into account, and an initial subsidy or a reduction in the component costs – mainly SPV panels and battery bank.     

Photosynthesis in a test tube- dye sensitized solar cells as a teaching tool

Dye sensitized solar cells employing natural plant dyes as phosensitizers can be effectively used to train students in the science and technology of solar cells. This is especially relevant to developing countries where facilities for silicon cell fabrication are non-existent. The cross-disciplinary nature of this device makes it very attractive for student projects. The present work describes such a project where anthocyanin dye from hibiscus flowers has been used as the electron harvester.     

Quality of buffalo meat burger containing legume flours as binders

The effect of addition of different decorticated legume flours, viz., soya bean, bengal gram, green gram and black gram, on the quality of buffalo meat burger was studied. The burgers consisted of optimized quantities of roasted or unroasted legume flour, spices and common salt. Inclusion of roasted black gram flour registered the highest yield of 95.7%, lowest shrinkage of 5% and lowest fat absorption of 26.6% on frying. Protein content of 18-20% was highest in the soya flour formulation. Free fatty acid (FFA) values (as% oleic) increased from 14.3 to 17.3 in freshly prepared samples (before frying) to 16.0-19.4 in 4 m frozen (-16±2?°C) stored samples and fried samples had about 25% lower FFA values. Formulations with roasted flours registered lower thiobarbituric acid (TBA) values (mg malonaldehyde/kg sample) of 0.6-1.5 as against 0.6-2.1 for unroasted flours before frying. The burgers prepared with any of these binders were organoleptically acceptable even after storage at -16±2?°C for 4 months., However, the burger with black gram dhal (dehulled split legume) flour had better sensory quality attributes compared to other legumes.     

Mobility of carbon nanotubes in high electric fields

The influence of electric fields on carbon nanotubes is experimentally demonstrated. Alignment of nanotubes along field lines, directed motion of nanotubes between electrodes separated by several thousand micrometers, and impressive solid-state actuation behavior of nanotube-embedded structures are demonstrated, taking into account the polarization and charging of the nanotubes. These effects are reported for long strands of nanotubes, nanotubes dispersed on substrates, and nanotube-embedded polymer strips. The relative magnitude of the field responsible for polarization and directed motion was found to be dependent on the morphology of the nanotubes used. These observations may foreshadow novel electromechanical applications for nanotube elements.