Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.     

Properties of the peptides liberated from rice protein in sokujo-moto

In the supernatant of sokujo-moto, a high level of acid carboxypeptidase (ACP) activity and a large amount of peptides were observed, however, the amount of free amino acids liberated was small. In order to determine why these peptides were not hydrolyzed to any significant degree by the ACP, the properties of the peptides in sokujo-moto were investigated in this study. Peptides were fractionated from sokujo-moto by ion exchange column chromatography. ACP purified from rice-koji (rice overgrown with Aspergillus oryzae) was allowed to react with the peptides, and it was found that they were not hydrolyzed to any significant degree by the enzyme. Gel filtration chromatography was performed to ascertain the molecular size distribution of the peptides in sokujo-moto, and it was revealed that they were of low molecular sizes; molecular size: mainly in the range of 200-400, and chain length: 2-3. ACP purified from rice-koji was also allowed to react with various synthetic peptides, and it was found that ACP of rice-koji could not rapidly hydrolyze low-molecular-size peptides, such as dipeptides or tripeptides. Acid protease (AP) purified from rice-koji released peptides of molecular sizes mainly in the range of 300-600 or above from rice protein under acidic conditions (pH 3.6; the pH of sokujomoto). When AP and ACP were allowed to act at the same time on rice protein, mainly low-molecular-size peptides (molecular sizes mainly in the range of 200-400) were produced. From these results, it was estimated that AP released peptides with molecular sizes mainly in the range of 300-600 or above from rice protein and ACP degraded the relatively higher molecular size peptides among them to lower molecular size peptides; consequently only low-molecular-size peptides with molecular sizes mainly in the range of 200-400 were released in the supernatant of sokujo-moto.     

Classification and identification of strains of Lactobacillus brevis based on electrophoretic characterization of D-lactate dehydrogenase: relationship between D-lactate dehydrogenase and beer-spoilage ability

The cell-free extracts of 60 strains which were identified phenotypically as being those of Lactobacillus brevis, including 48 isolates from the environment and 12 reference strains, were applied to polyacrylamide gel electrophoresis for extracting their NAD-dependent D- and L-lactate dehydrogenases (LDH). These strains were divided into 5 groups, i.e., Groups A, B, C, D, and E, on the basis of the electrophoretic mobilities of their D-LDH. The strains showed variations in their carbohydrate fermentation patterns. No relationship between the profile of D-LDH and the carbohydrate fermentation pattern was recognized. However, there appeared to be a relationship between the D-LDH profile and the beer-spoilage ability, because 40 out of 44 beer-spoilage strains identified as L. brevis were classified to Group B. We purified D-LDHs from the so-called complete beer-spoilage strain SBC 8002 of LDH Group B and from the non beer-spoilage strains JCM 1059T of LDH Group A and AHU 1508 of LDH Group C. Although the purified D-LDHs had the same molecular weight (84 kDa), each possessed a different optimum pH, optimum temperature, and isoelectric point. The aforementioned parameter values for the enzyme from the so-called complete beer-spoilage strain SBC 8002 of LDH Group B were 10.0, 50 degrees C, and 4.1, respectively; this strain was discriminated from the D-LDHs of the other two non beer-spoilage strains especially by its optimum temperature (50 degrees C).     

Submicrometer Comb-Drive Actuators Fabricated on Thin Single Crystalline Silicon Layer

Electrostatic comb-drive microactuators were fabricated by electron beam lithography on a 260-nm-thick silicon layer of a silicon-on-insulator wafer. The actuators consisted of comb electrodes, springs, and a frame. Two kinds of microactuators with doubly clamped and double-folded springs were designed and fabricated. The comb electrode was as small as 2.5 mum wide and 8 mum long and was composed of 250-nm-wide, 260-nm-thick, and 2-mum-long fingers. The air gap between the fingers was 350 nm. The spring was 250 nm wide, 260 nm thick, and 17.5 mum long, and the spring constant was 0.11 N/m. The force and displacement generated by the microactuator were 2.3 x 10^-7N and 1.0 mum, respectively. Applying an ac voltage, the oscillation amplitude became maximum at a frequency of 132 kHz. The mechanical and electrical characteristics of the fabricated actuators were investigated quantitatively.     

LSI implementation of a low-power 4×4-bit array two-phase clocked adiabatic static CMOS logic multiplier

As the density and operating speed of complementary metal oxide semiconductor (CMOS) circuits increases, dynamic power dissipation has become a critical concern in the design and development—of personal information systems and large computers. The reduction of supply voltage, node capacitance, and switching activity are common approaches used in conventional CMOS. In adiabatic switching circuits, the current flow through transistors can be significantly reduced by ensuring uniform charge transfer over the entire available time. This paper presents the simulation of this current in two-phase clocked adiabatic static CMOS logic (2PASCL) and conventional CMOS. From the SPICE simulations, at transition frequencies from 1 to 12 MHz, a 4×4-bit array 2PASCL multiplier shows a maximum reduction in power dissipation of 77% relative to that of a static CMOS. The measurement results of a 4×4-bit array 2PASCL multiplier demonstrate a 57% reduction compared to a 4×4-bit array two-phase clocked adiabatic dynamic CMOS logic (2PADCL). These results indicate that 2PASCL technology can be advantageous when applied to low-power digital devices operated at low frequencies, such as radio-frequency identification (RFID) tags, smart cards, and sensors.     

Three-Dimensional Packaging Technology for Stacked DRAM With 3-Gb/s Data Transfer

A 3-D packaging technology is developed for stacked dynamic random access memory (DRAM) with through-silicon vias (TSVs). Eight different dry etchers were evaluated for deep Si etching. Highly doped poly-Si TSVs were used for vertical traces inside silicon and interconnection between DRAM chips to realize a DRAM-compatible process. Through optimization of process conditions and layout design, a fast poly-Si filling has been obtained. The entire packaging was carried out at the wafer level by using smart chip connection with feedthrough interposer (FTI) technology. A new bump and wiring structure for the FTI has also been developed for fine-pitch and low-cost bonding. Normal operation during DRAM read/write was confirmed on a 512-Mb DRAM with TSVs, with an I/F chip as a memory controller. Simulation and measurement of the transfer function of the FTI wiring showed a 3-Gb/s/pin data transfer capability.     

Fabrication method for IC-oriented Si single-electron transistors

A new fabrication method for Si single-electron transistors (SETs) is proposed. The method applies thermal oxidation to a Si wire with a fine trench across it on a silicon-on-insulator substrate. During the oxidation, the Si wire with the fine trench is converted, in a self-organized manner, into a twin SET structure with two single-electron islands, one along each edge of the trench, due to position-dependent oxidation-rate modulation caused by stress accumulation. Test devices demonstrated, at 40 K, that the twin SET structure can operate as two individual SET's. Since the present method produces two SET's at the same time in a tiny area, it is suitable for integrating logic circuits based on pass-transistor type logic and CMOS-type logic, which promises to lead to the fabrication of single-electron logic LSIs     

All-optical discrimination based on nonlinear transmittance of MQWsemiconductor optical gates

This paper proposes an all-optical regenerator utilizing a novel all-optical discriminator. The impacts of nonlinearity of optical gates on discrimination performance are estimated. The evaluation of discrimination performance shows that amplified spontaneous emission noise and wave form distortion in optical signals can be effectively suppressed. We experimentally demonstrate the suppression using a low-temperature-grown optical switch up to 10 Gb/s     

Polarization-, Wavelength-, and Filter-Free All-Optical Clock Recovery in a Passively Mode-Locked Laser Diode With Orthogonally Pumped Polarization-Diversity Configuration

We proposed and demonstrated all-optical clock recovery system using a monolithic mode-locked laser diode (MLLD) that operated with less sensitivity to the polarization and the wavelength of the input data signals also with no bandpass filter to eliminate the input signal-components. The keys to this new technique are the MLLD integrated with a tensile-strained quantum-well saturable absorber and a new polarization-diversity setup by signal input orthogonally polarized to the lasing polarization of the MLLD. This approach was experimentally validated in the 40 Gbps clock recovery experiments. The results exhibited excellent performance of the clock recovery with low timing jitters (<0.3 ps) remaining small dependence on the wavelength and the polarization of the input data signals and input-signal suppression less than -30 dB with no use of the bandpass filter. We also succeeded in the stable clock recovery for the input of polarization-scrambled data signals.     

Light modulator using piezoelectric films with waveguides

A light modulator using piezoelectric films based on optical interference of the Mach-Zehnder type has been proposed and demonstrated. The modulator is constructed with two optical waveguides joined to each other at both ends to divide the incident light and to recombine them, and each waveguide is fabricated on a polyvinylidene fluoride (PVDF) film to serve as a voltage-driven phase-shifter.