Percolation in injection molded polymer blends

Elastic moduli of injection molded blends of polycarbonate with poly(styrene-co-acrylonitrile) (SAN) have been obtained at temperatures between the glass transition temperatures of the two components. When compared with compression molded blends as a function of composition, the moduli were found to differ by as much as a factor of three at intermediate compositions. The variations are ascribed to differences in connectivity between minor component particles. The morphologies of these materials have been modeled using percolation concepts to quantify continuity of the individual phases. The effects of phase continuity resulting from composition as well as dispersed phase shape differences were evaluated. It was found that shape per se has only a minor effect on percolation. However, shape as reflected in the size of dispersed particles relative to the extent of the domain in which they reside is primary for developing a model for continuity of the phases. An empirical relation for percolation in finite domains was devised from Monte Carlo simulations. Modulus values calculated from these continuity considerations agree well with the observed data.     

Weighted optimum bit allocations to orthogonal transforms forpicture coding

The classical optimization criterion used is the signal-to-(quantization) noise ratio (SNR). A general quantization methodology is developed which is based on the optimization of a frequency-weighted SNR: first, a quality criterion based on the weighted SNR is derived from the CCIR (Comite Consultatif International de Radiodiffusion) curves for analog TV: then, a methodology for optimizing the quantization is derived in a general form     

Novel amplified fiber-optic recirculating delay line processor

The application of optical amplifiers (OAs) to fiber-optic delay line signal processing is demonstrated. Both erbium-doped fiber amplifiers (EDFAs) and semiconductor optical amplifiers (SOAs) are applicable. Analytical results are presented for both amplified and unamplified fiber-optic recirculating delay lines (AFORDLs and UFORDLs). In the AFORDL an OA is inserted in the fiber loop. It is shown that the active AFORDL structure is capable of realizing all-fiber filters not possible with the passive UFORDL. This result is significant because it shows that the OAs can function beyond just the trivial optical loss compensation to provide extra flexibility not available in passive designs. An AFORDL design is presented which has a pole near +1 and a zero at -1 in the Z-plane resulting in useful characteristics in the magnitude and phase responses. The results suggest that extension of the concept to higher-order filters has the potential to lead to the realization of more complex optical processors     

89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

Mesa and planar SiGe-HBTs on MBE-wafers

SiGe-HBTs have the potential for outstanding analog and digital or mixed-signal high frequency circuits widely based on standard Si technology. Here we review on MBE grown transistors and circuits. Processes and results of a research-like SiGe HBT and two possible production relevant HBT versions are presented. The high frequency results with f_max and f_T up to 120 GHz and a minimum noise figure of 0.9 dB at 10 GHz demonstrate the advantage of using MBE samples with steep and high base doping and high germanium contents. A comparison to the concept of reported low doped, low germanium and triangular profiled SiGe base layers, realized by UHV-CVD, is given. In addition, some circuit demonstrators of SiGe-ICs will be presented.     

Single-Step Granulation Method with Microwaves: Preliminary Studies and Pilot Scale Results

Common pharmaceutical excipients and compounds were dried either by a simple convection method or by a combined convection and microwave method in a static bed or by a combined microwave and vacuum method in a mixed bed. A simple placebo granulation was dried by an exclusive vacuum method and by a combined microwave and vacuum method in a mixed bed. The results were compared.     

Limit of validity of the moisture diffusivity for the study of moisture transfer inside terracotta

In order to know the limit of validity of the concept of hydrical diffusivity, D_W, we tried to validate the Boltzmann's method used to identify it. We show that for a medium strictly satisfying the equation of diffusion, the method gives quite good results with nevertheless some inaccuracies for the extreme values of water contents. For the real studied material, a backed clay, its identification becomes more difficult because of the dispersion of the wetting phenomenon observed for different specimens of the same material. We are showing that the mean behaviour of one sample is near to be the same as the more probable behaviour of all the samples. Otherwise the values of D_W determined for a wetting cannot be used to describe a drying process. It practical interest is then considerably reduced. In order to test the influence of the gas phase pressure effects on the behaviour of the material, we have determined all the parameters necessary to describe, numerically, wetting and drying processes without to resort to D_W. We noticed an overpressure of the gas phase inside the material due to drying. If the gas pressure effects are, numerically, switched off, we cannot notice any influence on water content profiles for this type of material.     

Stabilization of Time-Varying Linear Discrete Interval-Coefficient Control Systems by Phase State Observations

Stabilization of the trajectories of a linear discrete system closed by dynamic feedback under interval uncertainty of the equations of motion and observation is studied. Sufficient conditions of stabilizability are formulated. Results of numerical experiments are given.     

An integrated modelling environment for the embodiment of mechanical systems

The efficient, economical and often elegant transformation from a design schema to an embodied design solution containing real components is essential for the commercial success of a product. More often the ability of the designer to explore an optimum solution is severely frustrated by the analytically intensive and time-consuming aspects of embodying a concept. This paper presents a computer based system-modelling tool that is to be used by designers during the transformation of a concept to an embodied solution particularly to deal with standard components. This environment provides for the representation of conceptual schemas and subsequent embodiment from computer based component selection modules. These selection modules encompass the full range of electronic representations for standard mechanical components. The strategy for representing a mechanical system, its included components and their associated representations is discussed. The process of constructing a system model, specifying the desired performance characteristics and system resolution are also described.