Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy

By the use of atomic force microscopy (AFM), formation mechanism of nodular structure in cellulose acetate membranes was systematically investigated. Elementary factors affecting the nodule formation were delineated on the basis of both kinetic and thermodynamic considerations. It was shown that (1) the exact nature of nodular structure is thermodynamic equilibrium glassy state; nodular structure will vanish in the rubbery state; (2) the thermodynamic factor affecting nodule formation is the membrane formation temperature; with the membrane formation temperature decreasing, more chain segments are able to form nodular structures; (3) nodule formation is dependent on the segment rearrangement; variation of the solvent environment is the major kinetic factor affecting the segment rearrangement and nodule formation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1328–1335, 2003     

八羰基二钴的合成

本文考察了反应起始原料、催化剂及其加入量、溶剂和压力对八羰基二钴合成的影响，得出了最佳的合成条件．     

Fractal characteristics of gas-solids flow in a circulating fluidized bed

A fractal approach is adopted to describe the dynamic behavior of a circulating fluidized bed. Two times series, differential pressure fluctuations along the riser height and solids momentum fluctuations along the radial direction, are measured and analyzed in terms of fractal dimensions. The influences of operating conditions and axial/radial positions on the fractal dimension are discussed. Attempts are also made to interpret the flow structure in the bed in terms of the fractal dimension. It is found that fractal analysis can provide a useful tool for understanding the characteristics of gas-solids flow in circulating fluidized beds.     

利用高铝矾土研制低温耐磨氧化铝瓷

着重介绍了以高铝矾土为主要原料的85瓷的合理配方和所采用的生产工艺，并对吸水率、体积密度、耐磨性、显微硬度、抗折强度和断裂韧性等物理性能进行了测试。还探讨了低温烧成机理、提高耐磨性的途径。结合显微结构分析了生产工艺对产品性能的影响。     

基于CaO引导的甲烷蒸汽重整化学链燃烧制氢系统

为在重整气中得到高纯H_2和降低尾气CO_2分离成本,建立了基于CaO引导的甲烷蒸汽重整化学链燃烧制氢系统,该系统在重整反应器中加入CaO吸收剂,用以吸收重整器内的CO_2,提高重整气中H_2浓度,形成的CaCO_3固体在煅烧器中受热分解重新生成CaO。利用Aspen Plus进行了过程模拟及热力学分析,并研究主要参数对系统性能的影响,得到优化的操作条件为:CaO循环量/CH_4比为0.5,CH_4(燃料)/CH_4比为0.35,NiO循环量/CH_4比为1.4。CaO循环量/CH_4比从0变化到0.5时,重整气中H_2浓度从0.60增长到0.99;CH_4(燃料)/CH_4比在0.25~0.45区间变化时,重整气中H_2浓度从0.86提高到0.99,产气量增加;NiO循环量/CH_4比在1~1.6区间变化时,重整气中H_2浓度从0.88增长到0.99,系统有效能效率变化较小。     

机械力化学湿法一步制备表面修饰磷酸锌微粉

以氧化锌和磷酸为原料,以硅烷偶联剂为改性剂,采用机械力化学湿法制备微细磷酸锌并进行表面改性.用XRD、润湿角、活化指数、沉降时间等手段对产物进行表征,用FT-IR对改性粉末的结构进行分析,初步探讨了偶联剂与磷酸锌的作用机理.结果表明产物为二水和四水磷酸锌混合物;在红外区域2 800～3 000 cm-1和1 400 cm-1有偶联剂的特征吸收峰,说明偶联剂与磷酸锌之间发生了化学反应;当硅烷偶联剂添加质量分数由0增加到2%,改性产品的活化指数由0增加到98.71%,对水的润湿角由0°增加到93.21°,沉降时间由0.5 h增加到176 h,在涂料中的分散性和贮存稳定性得到改进.     

混杂增强聚氨酯复合硬质泡沫塑料的研制

系统介绍混杂增强聚氨酯复合硬质泡沫塑料的制备情况，详细分析聚氨酯硬质泡沫塑料制备过程中的工艺问题，表征与分析其结构与性能，着重分析偶联剂对填充物增强性能的影响以及填充物含量对聚氨酯硬质泡沫塑料吸水性能的影响，介绍聚氨酯硬质泡沫塑料的应用，最后指出其发展前景。