Predicting mode-II delamination suppression in z-pinned laminates

A finite element model for predicting delamination resistance of z-pin reinforced laminates under the mode-II load condition is presented. End notched flexure specimen is simulated using a cohesive zone model. The main difference of this approach to previously published cohesive zone models is that the individual bridging force exerted by z-pin is governed by a specific traction-separation law derived from a unit-cell model of single pin failure process, which is independent of the fracture toughness of the unreinforced laminate. Therefore, two separate traction-separation laws are employed; one represents unreinforced laminate properties and the other for the enhanced delamination toughness owing to the pin bridging action. This approach can account for the so-called large scale bridging effect and avoid using concentrated pin forces in numerical models, thus removing the mesh-size dependency and permitting more accurate and reliable computational solutions.     

Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepared by air oxidation reactions and blending with PVC. The oxidation reaction produced a significant increase in the number of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the number of polar groups, such as hydroxyls, and thus a reduction in the amount of atactic polymer was observed. Furthermore, an increase in the molecular weight of the oxidized oil, as well as large amounts of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the crystalline phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42102.     

Stress—corrosion cracking of austenitic stainless steel in hydrochloric acid media at room temperature

Stress—corrosion cracking of solution quenched, type 304, stainless steel can occur at room temperature in HCl solutions ranging between 5·10^?1M and 1M HCl. The cracking observed in HCl solutions is similar to that previously observed in H₂SO₄ + NaCl and HClO₄ + NaCl solutions. Cracking occurs at ? 0·200 V (NHE), in the active potential region, it is under cathodic control, and it develops in conditions under which the corrosion rate of the external surface area is more or less constant and independent of the HCl concentration, in the range 10^?1 M?1 M HCl. At higher HCl concentrations, corrosion rates increase and uneven, general corrosion occurs instead of cracking. The development of pitting and stress—corrosion cracking under active conditions precludes the conclusion that active—passive cells always play a role in localized corrosion and, in particular, in stress—corrosion cracking. Under these conditions, it has been shown that sensitized and non-sensitized specimens behave similarly (giving rise in both cases to transgranular cracking); active—passive cells, due to chromium depletion at the grain boundaries, are not involved. Active—passive corrosion mechanisms can however arise at more noble potentials (0·100?0·200 V NHE), as in the case of HClH₂O₂ solutions of specific concentration, producing intergranular corrosion of the stainless steel in the sensitized condition.     

Si/Zr mesoporous catalysts for the vapour phase synthesis of alkylindoles

Si/Zr mesoporous MCM-41 catalysts were investigated in the vapour phase synthesis of 7-ethylindole (7-ETI) starting from 2-ethylaniline (2-ETAN) and ethylene glycol (EG). The catalysts were prepared from the corresponding alkoxides in the presence of a cationic surfactant, which acts as a structure-directing agent. After removal of the surfactant, the resulting mesoporous solids were characterised by X-ray diffraction, N₂ adsorption–desorption, temperature programmed desorption (TPD) of NH₃ and pyridine adsorption coupled with FTIR spectroscopy. As the amount of ZrO₂ increased in the catalysts, the BET surface area decreased, while an enhancement of the acidity took place. The activation of EG to 2-hydroxyacetaldehyde and its attack on 2-ETAN, leading to the formation of 7-ETI, was favoured by increasing the amount of ZrO₂ The maximum yield for the catalyst was obtained with ca. 50 wt.% of ZrO₂, which promoted the presence of Lewis and Brönsted acid sites of suitable strength and concentration, although mesoporous catalysts exhibited very good regenerability.     

Cranberry and Recurrent Cystitis: More than Marketing?

Epidemiologic studies indicate that millions of people suffer from recurrent cystitis, a pathology requiring antibiotic prophylaxis and entailing high social costs. Cranberry is a traditional folk remedy for cystitis and, which, in the form of a variety of products and formulations has over several decades undergone extensive evaluation for the management of urinary tract infections (UTI). The aim of this retrospective study is to summarize and review the most relevant and recent preclinical and clinical studies on cranberries for the treatment of UTIs. The scientific literature selected for this review was identified by searches of Medline via PubMed. A variety of recent experimental evidence has shed light on the mechanism underlying the anti-adhesive properties of proanthrocyanidins, their structure–activity relationships, and pharmacokinetics. Analysis of clinical studies and evaluation of the cranberry efficacy/safety ratio in the prevention of UTIs strongly support the use of cranberry in the prophylaxis of recurrent UTIs in young and middle-aged women. However, evidence of its clinical use among other patients remains controversial.     

The underground cavity network of south-eastern Rome (Italy): an evolutionary geological model oriented to hazard assessment

There are many abandoned underground mines beneath the city of Rome, created in the Pleistocene pyroclastic deposits over thousands of years. These pose a serious public safety risk hence the study was undertaken to better assess the stability of the underground workings. The Villa de Sanctis public park was selected as a suitable test site, as in this area the cavity network can be inspected and the different steps of the progressive migration of voids toward the surface can be identified. In addition to an underground geological survey, geophysical investigations were undertaken to elucidate some key characteristics of the involved lithological units, including elastic stiffness and layer thickness. Recommendations are made for further studies of the accessible and inaccessible areas.     

High-throughput approach to the catalytic combustion of diesel soot II: Screening of oxide-based catalysts

Following the development of a high-throughput (HT) methodology for the evaluation of diesel soot oxidation catalysts in a 16 parallel channels reactor, a library of over 60 catalysts was tested under optimized conditions. The catalyst compositions were chosen to include solids which specific properties like oxygen storage capacity, oxygen mobility and ionic conductivity. The key parameters for high activity appear related to the presence of active and mobile surface oxygen species, and to an appropriate catalyst particle size in order to favour the number of contacts with the soot. In contrast, high oxygen storage capacity and bulk oxygen ion mobility do not appear as relevant properties for high catalytic activity. Nine new formulations were found to perform better than the reference catalyst “high surface area (HSA) ceria” (Rhodia).     

Characterization of a High Capacity Multi-User Optical Access Network Using 1 Gb/s 16 QAM Subcarrier Multiplexing

Error free operation assuming common FEC techniques is experimentally demonstrated for a multi-user optical access network based on 40 channel DWDM-PON infrastructure and Gigabit Ethernet 16 QAM subcarrier multiplexing transmission. Such a system would support 400 users with symmetrical 1.25 Gb/s connections and media independent final connectivity. To replicate actual working conditions, the experimental setup relied only on commercially available components and was tested with realistic distance reach and high sub-channel load.